• Korean Journal of Remote Sensing
• /
• v.32 no.6
• /
• pp.589-601
• /
• 2016

Sea surface currents were estimated by applying the Maximum Cross Correlation (MCC), Zero-mean Sum of Absolute Distances (ZSAD), and Zero-mean Sum of Squared Distances (ZSSD) algorithms to Himawari-8/Advanced Himawari Imager (AHI) thermal infrared channel data, and the comparative analysis was performed between the results of these algorithms. The sea surface currents of the Kuroshio Current region that were retrieved using each algorithm showed similar results. The ratio of errors to the total number of estimated surface current vectors had little difference according to the algorithms, and the time required for sea surface current calculation was reduced by 24% and 18%, relative to the MCC algorithm, for the ZSAD and ZSSD algorithms, respectively. The estimated surface currents were validated against those from satellite-tracked surface drifter and altimeter data, and the accuracy evaluation of these algorithms showed results within similar ranges. In addition, the accuracy was affected by the magnitude of brightness temperature gradients and the time interval between satellite image data.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.6
• /
• pp.175-182
• /
• 2006

In the design of composite structures, shear connectors such as headed stud, channel, perforated plate, etc, are commonly used to transfer longitudinal shear forces across the steel-concrete interface. Many researches have been conducted to improve the characteristics of different types of shear connector. This paper presents the results of 11 push-out tests performed on the new perforated rib connectors with shearing bars embedded in concrete slab under static loads. The results obtained from these tests are as following : 1) The bearing plate welded on both sides of perforated rib plate improves the stiffness and strength. 2) The capacity of perforated connectors is influenced primarily by the transverse reinforcements and shearing bars.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_3
• /
• pp.1681-1690
• /
• 2020

A scanning lidar system has been developed. The system has two wavelength observation channels of 532 and 1064 nm and is capable of 360-degree horizontal scanning observation. In addition, an analysis method that can classify the measured particle as an indicator of coarse-mode particle (PM2.5-10) and an indicator of fine-mode particles (PM2.5) and calculate the mass concentration of each has been developed by using the backscatter coefficient at two wavelengths. It was applied to the data calculated by observation. The mass concentrations of PM10 and PM2.5, which showed a distribution of 22-110 ㎍/㎥ and 7-78 ㎍/㎥, respectively, were successfully calculated in the Ulsan Onsan Industrial Complex using the developed scanning lidar system. The analyzed results showed similar values to the mass concentrations measured on the ground around the lidar observation area, and it was confirmed that high concentrations of 80-110 ㎍/㎥ and 60-78 ㎍/㎥ were measured at points discharged from factories, respectively.

• Geophysics and Geophysical Exploration
• /
• v.6 no.3
• /
• pp.126-133
• /
• 2003

High-resolution shallow marine seismic surveys have been carried out for the resources exploration, engineering applications and Quaternary mapping. To improve the resolution of subsurface structure image, multichannel digital technique has been applied. The quality of the image depends on the vertical and horizontal resolution and signal to noise (S/N) ratio which are associated with the data acquisition parameters such as sample interval, common midpoint (CMP) interval and CMP fold. To understand the effect of the acquisition parameters, a test survey was carried out off Yeosu and the acquired data were analyzed. A 30 $in^3$ small air gun was used as a seismic source and 8 channel streamer cable with a 5 m group interval was used as a receiver. The data were digitally recorded with a shot interval of 2 s and sample interval of 0.1 ms. The acquired data were resampled with various sample intervals, CMP intervals and CMP folds. The resampled data were processed, plotted as seismic sections and compared each other. The analysis results show that thin bed structure with ${\~}1m$ thickness and ${\~}6^{\circ}$ slope can be imaged with good resolution and continuity and low noise using the acquisition parameters with a sample interval shorter than 0.2 ms, CMP interval shorter than 2.5 m and CMP fold more than 4. Because seismic resolution is associated with the acquisition parameters, the quality of the subsurface structure can be imaged successfully using suitable and optimum acquisition parameters.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1593-1608
• /
• 2009

If a certain relay node in multi-hop wireless networks might become a malicious node that does not cooperate with other nodes or a selfish node, network throughput will be dramatically decreased. Most of existing ad hoc routing protocols assuming that the nodes will fully cooperate with other nodes do not resolve the problem of network performance degradation due to malicious and selfish nodes. This paper presents the CARE (Cooperative Ad hoc routing protocol based REputation) scheme incorporating the reputation management that can achieve a multi-hop wireless network with high throughput performance. The proposed scheme provides the horizontal cross-layer approach which can identify misbehaving malicious, selfish nodes dropped out of the hop-by-hop based packet processing in the network and then set up an optimal packet routing path that will detour misbehaving nodes. And the vertical cross-layer approach contained in the CARE scheme attempts to improve the quality of routing paths by exploiting the quality of link information received from the MAC layer. Besides, it provides high TCP throughput by exploiting the reputation values of nodes acquired from the network layer into the transport layer. A case study on experiments and simulations shows that the CARE scheme incorporating vertical and horizontal cross-layer approaches yields better performance in terms of the low rate of packet loss, fast average packet delivery time, and high TCP throughput between end-to-end nodes.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.6
• /
• pp.167-175
• /
• 2015

The purpose of this study is to review the relationship between managerial system(CEO support, pay system, education & training) and knowledge management, and the moderating effect of decentralization and formalization in small business. In order to verify and achieve the purposes mentioned above, questionnaire data are gathered and analysed from 227 subjects in Kangwon-do province. Multiple regression and multiple hierarchical regression analysis were applied to test the proposed hypotheses: 1) the relationship between managerial system and knowledge acquisition, 2) the relationship between managerial system and knowledge transfer, 3) the moderating effects of decentralization on the relationship between managerial system and knowledge management, 4) the moderating effects of formalization on the relationship between managerial system and knowledge management. Empirical survey's findings are as follows; First, knowledge acquisition and transfer appeared to be positively related with CEO support and education & training. Second, education & training was verified to be more positively related with knowledge transfer in higher decentralization group than in lower group. Third, CEO support and education & training were more positively with knowledge acquisition in lower formalization group than in higher group. Fourth, pay system were more positively with knowledge transfer in lower formalization group than in higher group.

• Korean Journal of Remote Sensing
• /
• v.14 no.2
• /
• pp.165-174
• /
• 1998

The observation of liquid water content(LWC) and the estimation of precipitation enhancement by cloud seeding were made over the Andong in Korea from March 1997 through Feb 1998. A dual-channel microwave radiometer was used to measure the liquid water content and water vapor. It was shown that the 90% of observational period had the amount of less than 0.1 mm in LWC, and that the amount of precipitation was proportionally increased to liquid water content. The amount of LWC has maximum in summer and minimum in winter. The content of liquid cloud water was showed higher value from the time of 12 to the time of 17 except for summer season in which it extremely fluctuated with a large precipitation. The majority of liquid water content over the area occurred with westerly and southwesterly wind which were flowed from the Sobaek mountain. The ratio of horizontal LWC flux and vertical precipitation flux, $P_{en}$ is almost ranked in the interval of 0.0~0.5 with maximum of 0.5 in spring, 0.2 in summer and fall, and 0.1 in winter. Accordingly, it is estimated that the potential enhancement of precipitation over Andong area by cloud seeding has high value in spring with westerly wind.

• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.153-162
• /
• 2019

Rapid variations in the geometry (i.e., thickness) of the refractor and low velocities affect greatly the imaging of the reflectors of land seismic data. Conventional solutions to obtain the weathering models utilizes first break picking method, which requires time consuming steps and causes the human error in picking the first arrivals. A new interferometric approach (interferometric refraction statics, IRS) which utilizes the first arrival signal (S/N enhanced by refraction convolution stack) instead of first break picking, is tested in this study to the synthetic data from the velocity structure provided by surface geophysics (refraction, MASW) and borehole geophysics (tomography, SPS logging) for the Cheongju granitic bodies. The results of IRS approach are found to be better than the ones from conventional first break picking in terms of continuities and horizontal resolution of the reflectors. The unresolved long-wavelength statics in brute stack are much removed by IRS weathering correction and the overlying refractors (the base of shallow weathering zone) are incidentally delineated in the refraction convolution stack.

• The Korean Journal of Petroleum Geology
• /
• v.5 no.1_2 s.6
• /
• pp.9-15
• /
• 1997

The study area is located in the Central Bransfield Basin, Antarctica. To analyze the morphology of seafloor, structure of basement, and seismic stratigraphy of the sedimentary layers, we have acquired, processed, and interpreted the multi-channel seismic data. The northwest-southeastern back-arc extension dramatically changes seafloor morphology, volcanic and fault distribution, and basin structure along the spreading ridges. The northern continental shelf shows a narrow, steep topography. In contrast, the continental shelf or slope in the south, which is connected to the Antarctic Peninsula, has a gentle gradient. Volcanic activities resulted in the formation of large volcanos and basement highs near the spreading center, and small-scale volcanic diapirs on the shelf. A very long, continuous normal fault characterizes the northern shelf, whereas several basinward synthetic faults probably detach into the master fault in the south. Four transfer faults, the northwest-southeastern deep-parallel structures, controlled the complex distributions of the volcanos, normal faults, depocenters, and possibly hydrocarbon provinces in the study area. They have also deformed the basement structure and depositional pattern. Even though the Bransfield Basin was believed to be formed in the Late Cenozoic (about 4 Ma), the hydrocarbon potential may be very high due to thick sediment accumulation, high organic contents, high heat flow resulted from the active tectonics, and adequate traps.

• Investigative Magnetic Resonance Imaging
• /
• v.16 no.1
• /
• pp.67-75
• /
• 2012

Purpose : We studied enhanced method to view the vessels in the brain using Magnetic Resonance Angiography (MRA). Noticing that Maximum Intensity Projection (MIP) image is often used to evaluate the arteries of the neck and brain, we propose a new method for view brain vessels to stereo image in 3D space with more superior and more correct compared with conventional method. Materials and Methods: We use 3T Siemens Tim Trio MRI scanner with 4 channel head coil and get a 3D MRA brain data by fixing volunteers head and radiating Phase Contrast pulse sequence. MRA brain data is 3D rotated according to the view angle of each eyes. Optimal view angle (projection angle) is determined by the distance between eye and center of the data. Newly acquired MRA data are projected along with the projection line and display only the highest values. Each left and right view MIP image is integrated through anaglyph imaging method and optimal stereoscopic MIP image is acquired. Results: Result image shows that proposed method let enable to view MIP image at any direction of MRA data that is impossible to the conventional method. Moreover, considering disparity and distance from viewer to center of MRA data at spherical coordinates, we can get more realistic stereo image. In conclusion, we can get optimal stereoscopic images according to the position that viewers want to see and distance between viewer and MRA data. Conclusion: Proposed method overcome problems of conventional method that shows only specific projected image (z-axis projection) and give optimal depth information by converting mono MIP image to stereoscopic image considering viewers position. And can display any view of MRA data at spherical coordinates. If the optimization algorithm and parallel processing is applied, it may give useful medical information for diagnosis and treatment planning in real-time.