• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.237-237
• /
• 2022

우리나라 하천 내에 설치된 횡단구조물은 보 35,000개소 이상으로 전국 하천의 0.6 km마다 수공구조물이 위치해 있으며 이로 인해 종적(longitudinal) 연결성에 영향을 미치는 것으로 나타났다. 농어촌연구원의 조사에 따르면 하천 횡단구조물이 설치된 구간에 어도 설치율은 14.9%로 나타났으며 이는 수생태 관점에서 연속성이 매우 열악한 상태임을 확인 할 수 있다. 이에 우리나라 각 부처 국토교통부, 환경부 등에서는 수생태 연속성을 확보하고자하는 노력이 지속되고 있으며 대표적으로 어류의 이동통로인 어도를 설치하거나 기존 어도의 효율을 향상시키기 위하여 개보수 작업을 지속적으로 실시하고 있다. 어도의 기능을 평가하기 위해서는 어도 내의 수리특성을 정확히 파악하는 것이 중요한데 연속적인 구조물로 구성된 어도 내 흐름은 매우 복잡하다. 특히 어도 내 구조물간 상호작용에 의하여 비정상 흐름이 발생하며 구조물 뒤에서는 사수역(dead zone)이 형성된다. 사수역에서 나타나는 와류의 거동은 구조물의 기하학적 특성에 따라 변화한다. 본 연구에서는 2차원 수심적분 수치모형을 활용하였으며 벽면 근처 점성저층의 유속분포을 재현하기 위하여와 점성항에 감쇠함수(damping function)를 고려하였다. 수치모형의 검증을 위해 실내 실험수로의 직선 개수로에서 PIV(particle image velocimetry)를 활용하여 연속적으로 배치된 구조물에 의한 유속자료를 활용하였다. 이 결과는 향후 새로운 어도설계 혹은 기 설치된 어도의 수리학적 기능을 평가하는데 활용이 가능할 것으로 보인다.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.11
• /
• pp.63-74
• /
• 2019

Numerical liquefaction model and response history analysis procedure are verified based on dynamic centrifuge test results. The test was a part of the Liquefaction Experiments Analysis Project (LEAP). The model ground was formed inside of rigid box by using the submerged Ottawa F65 sand with a relative density of 55% and 5° of surface inclination. A tapered sinusoidal wave with a frequency of 1 Hz was applied to the base of the model box. Numerical analyses were performed by two dimensional finite difference method in prototype scale. The soil is modeled to show hysteretic behavior before shear failure, and Mohr-Coulomb model is applied for shear failure criterion. Byrne's liquefaction model was applied to track the changes in pore pressure due to cyclic loading after static equilibrium. In order to find an appropriate flow condition for the liquefaction analysis, numerical analyses were performed both in drained and undrained condition. The numerical analyses performed under the undrained condition showed good agreement with the centrifuge test results.

• Journal of Korea Water Resources Association
• /
• v.33 no.2
• /
• pp.181-193
• /
• 2000

This paper presents the flow and the suspended sediment movement over ripples for oscillatory flows. A new numerical model system is developed, and applied to a laboratory experimental condition of regular waves and a fictitious condition of irregular waves. The flow field is obtained from a programme proposed by Kim et. al.(1994), which is a modified version of SOLA based on SMAC scheme. The sub-model solves the continuity and Reynolds momentum equations in the x-z plane. The wave orbital velocities, shear stresses, and pressure are all reasonably reproduced by the model. The model results on the vertical velocity component show good agreement with the measurements. The suspended sediment transport sub-model is newly set up to solve the advection-diffusion equation of suspended sediment using a split method, and involving a special shear entrainment from the whole ripple surface. The calculated suspended sediment concentrations for regular waves show reasonable agreement with measurements at Deltaflume. The model results for random waves show that the suspended sediment concentration is higher than those for regular waves and that the sediment diffuses higher than for regular waves with the significant wave height and the peak wave period of the irregular waves.

• Journal of Korea Water Resources Association
• /
• v.42 no.4
• /
• pp.309-317
• /
• 2009

This study analyzed a hydrodynamic behavior using the EFDC model (Environmental Fluid Dynamics Code) in the downstream of the Nakdong River in the case of a storm surge and a localized torrential rainfall caused by a major typhoon, and the sea level rise caused by global warming. The study area is selected Gaduk island with the lower boundary and Jindong with the upper boundary, to investigate the total river hydrodynamic behavior including the estuary. In order to verify this numerical model, the calculated results was compared with the observed stage at each gauging point in case of the storm rainfall in 2003 and 2006. From the results, it was shown that the numerical model(EFDC) has high accuracy and is useful in simulating more various cases.

• Journal of the Korean earth science society
• /
• v.34 no.6
• /
• pp.507-514
• /
• 2013

Recent reports about Mt. Baekdusan indicate an increasing potential of lahar generation due to volcanic activity around Lake Cheonji. In this study, we model lahar assuming volcanic activity underneath the caldera located at the top of Mt. Baekdusan. Lahar-inundation hazard zones (LAHARZ), software that runs within a Geographic Information System (GIS), was used for lahar modeling in various conditions of digital terrain resolution and model parameters. The sensitivity analysis of model parameters shows that both sink threshold and terrain resolution have limited impact on the modeling result. Combinations of stream threshold and resolution indicate distinctive distributions in stream delineation. The limitations of LAHARZ seem to largely be associated with the assumption of an existing flow generation algorithm. However, the impact of different resolutions on the final lahar extent was found to be small.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1385-1394
• /
• 1994

A three-dimensional numerical model of surface buoyant jets with variable density was established. The model uses fully nonlinear, time-dependent, three-dimensional, ${\sigma}$-transformed equations of motion and equation of heat transport. A semi-implicit numerical scheme in time has been adopted for computational efficiency. The model was applied for thermal jets discharging into a stagnant water and the simulated results were compared with a hydraulic experimental data set showing good agreement. Comparative studies of exchange coefficients and stability functions indicated that spatial variation of exchange coefficients should be considered and the existing stability functions should be modified to simulate surface buoyant jets accurately.

• Journal of Navigation and Port Research
• /
• v.34 no.6
• /
• pp.417-422
• /
• 2010

In this study, the resistance performances of barge are analyzed by model tests and computation using CFD to investigate the flow characteristics around a barge in still water. The model tests are carried out in infinite depth in Inha Technical College Circulation Tank to observe the resistance and the numerical simulations based on VOF(Volume of Fluid) method are performed to analyze the flow around the barge. We have selected two barge models to investigate the flow characteristics according to the different type of barges. The experiments are carried out with the models from 5kts to 10kts(designed speed 7kts) considering the effect of adverse and favorable current. The numerical simulations are performed to analyze the flow and resistance characteristics of barge in the full loaded condition with the target speed and compared with the experimental data to confirm the reliability of the numerical method. The result was that the difference of resistance with 25% occurred at low speed and EHP increased rapidly from 7kts.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.12
• /
• pp.93-105
• /
• 2017

This study presents direct shear tests, model tests, and numerical simulations to assess the effect of reduction of soil strength because of saturation during formation of ground cave-in caused by damaged sewer pipe lines. The direct shear test results show that the saturation affects the cohesion of soil significantly although it does not influence the friction angle of soil. To experimentally reproduce ground cave-in, the model tests were performed. As ground cave-ins were accompanied with extreme deformation, conventional finite element method has difficulty in simulating them. The present study relies on generalized interpolation material point method, which is one of meshless methods. Although there are differences between the model test and numerical simulation caused by boundary conditions, incomplete saturation, and exclusion of groundwater flow, similar ground deformation characteristics are observed both in the model test and numerical simulation.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.2 s.42
• /
• pp.7-15
• /
• 2005

Numerical analysis model is proposed to predict the dynamic behavior of a single-degree-of-freedom structure that is equipped with hybrid base isolation system. Hybrid base isolation system is composed of friction pendulum systems (FPS) and a magnetorheological (MR) damper. A neuro-fuzzy model is used to represent dynamic behavior of the MR damper. Fuzzy model of the MR damper is trained by ANFIS (Adaptive Neuro-Fuzzy Inference System) using various displacement, velocity, and voltage combinations that are obtained from a series of performance tests. Modelling of the FPS is carried out with a nonlinear analytical equation that is derived in this study and neuro-fuzzy training. Fuzzy logic controller is employed to control the command voltage that is sent to MR damper. The dynamic responses of experimental structure subjected to various earthquake excitations are compared with numerically simulated results using neuro-fuzzy modeling method. Numerical simulation using neuro-fuzzy models of the MR damper and FPS predict response of the hybrid base isolation system very well.

• Journal of Wetlands Research
• /
• v.16 no.3
• /
• pp.327-336
• /
• 2014

Submerged thin walls are extreme case of submerged rectangular blocks, and could be used for many purposes in rivers or coastal zones, e.g. to tsunami. To understand flow characteristics including flow and pressure fields around a specific submerged thin wall a numerical model was applied which includes computation of hydrodynamic pressure on ${\sigma}$-coordinate. ${\sigma}$-coordinate has strong merits for simulation of subcritical flow over mild-sloped beds. On the other hand ${\sigma}$-coordinate is quite poor to treat sharp structures on the bed. There have been a few trials to incorporate dynamic pressure in ${\sigma}$-coordinate by some researchers. One of the previous approaches includes process of sloving the Poisson equation. However, the above method includes many high-order terms, and requires long cpu for simulation. Another method SOLA was developed by Hirt et al. for computation of dynamic pressure, but it was valid for straight grid system only. Previous SOLA was modified for ${\sigma}$-coordinate for the present purpose and was adopted in a model system, CST3D. Computed flow field shows reasonable behaviour including vorticity is much stronger than the upstream and downstream of the structure. The model was verified to laboratory experiments at a 2DV flume. Time-average flow vectors were measured by using one-dimensional electro-magnetic velocimeter. Computed flow field agrees well with the measured flow field within 10 % error from the speed point of view at 5 profiles. It is thought that the modified SOLA scheme is useful for ${\sigma}$-coordinate system.