• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.581-588
• /
• 2002

In this paper, we newly propose the optical CDMA routing scheme for the radio access network. At the radio base station (RBS), the received radio signals are multiplied by the PN codes and converted to the CDMA radio signals. In the next optical CDMAS are performed and multiplxed by using the PN codes which are the addresses of the routing mobile switching center (MSC). At the MSC, the CDMA radio signals are routined to another MSC by the CDM receiver at the routing node. In the case MSC is equal to the desired MSC, the radio signal is correlated by the two-layerd spectrum despreading at a time. Finally we theoretically analyze the signal-to-interference and noise power ratio of regenerated signal and the routing error probability and show the availability of proposed scheme.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.2
• /
• pp.33-43
• /
• 2010

Geothermal energy is gaining wide attention as a highly efficient renewable energy and being increasingly used for heating/cooling systems of buildings. The standing column well (SCW) is especially efficient, cost-effective, and suitable for Korean geological and hydrological conditions. However, a numerical model that simulates the SCW has not yet been developed and applied in Korea. This paper describes the development of the SCW numerical model using a finite-volume analysis program. The model, through hydro-thermal coupled analyses, simulates heat transfer through advection, convection, and conduction. The accuracy of the model was verified through comparisons with field data measured at SCWs in the U.S. and Korea. Comparisons indicated that the SCW numerical model can closely predict the performance of a SCW. The numerical model was used to perform a comprehensive parametric study in the companion paper.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.231-233
• /
• 2010

최근 어항에도 친환경항만을 건설하기 위한 노력이 국제적으로 확산되고 있으며, 우리나라에서도 어항의 정비 및 재개발부분에서 적극적으로 수질개선을 위한 기술 적용이 본격화 되고 있다. 본 연구는 우리나라 남해의 소규모 어항 및 해수욕장에 슬릿형 해안 구조물이 시공된 실해역의 실측자료와 수치해석을 통해 현장적용성의 분석을 수행하였다. 수치실험으로는 파랑작용 평형방정식을 이용하는 SWAN 모델을 구성하고 수리모형실험에서 분석된 실린더 슬릿형 방파제의 반사와 투과계수를 모텔에 도입하였다. 수치실험은 한국해양연구원의 전해역 심해설계파 추정 보고서 II (2005)중의 심해설계파 제원을 사용하였으며, 대상해역의 1970년~2006년 (37년간) 관측된 연최대 풍속자료를 이용하여 모델에 반영하였다. 설리항에서 S, SSE, SE계열의 파랑의 내습에 대한 분석을 수행하였으며, 그 결과 구조물이 항내에서 정온도가 유지되며 해수순환에도 이점이 있음을 현장관측 자료분석과 수치실험결과를 통하여 확인할 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.419-423
• /
• 2005

2차원 하천흐름. 유사이동, 오염확산 해석을 위해서는 유한요소법(FEM) 등을 활용한 수치해석 모델이 사용되며, 이 때 모델링을 위해서 모의영역은 2차원의 요소망으로 구성하게 된다. 기존 국내 연구에서는 이러한 2차원 요소망 생성 및 수치해석을 위해 SMS 및 CCHE2D와 같은 외국의 상용 프로그램을 이용하였으나, "수자원의 지속적 확보기술개발 사업"의 일환으로 수행중인 "RAMS(River Analysis and Modeling System) 개발" 과제를 통해 순수 국산 2차원 수리해석 소프트웨어가 개발 중에 있다. 본 연구에서는 RAMS를 비롯한 기타 수리해석 모델에서 사용 가능한 2차원 범용 요소망 생성 프로그램을 개발하고자 다양한 요소망 생성 기법 및 국외 상용 2차원 수리해석 모델 프로그램에서의 메쉬 생성방법 등을 분석하여 프로토타입 메쉬 생성기를 개발하였다. 현재 개발 중인 요소망 생성 프로그램은 요소망 생성을 위한 기본 기능 외에도 생성된 요소망 데이터를 RAMS에 포함되어 있는 다양한 2차원 유한요소 모형의 입력자료 형태로 변환함으로써 수리해석에 적용가능하다. 이러한 범용 2차원 요소망 생성 프로그램의 개발은 안정적인 수치해석의 기반을 제공하고 다양한 하천흐름, 유사, 수질 해석 모델과 연계함으로써 하천의 수리학적인 거동을 보다 정확히 모의할 수 있을 것으로 기대된다.

• Nuclear Engineering and Technology
• /
• v.21 no.4
• /
• pp.267-276
• /
• 1989

A numerical model for nuclide migration through fractured rock media has been developed. Nuclide transport with groundwater in rock fissures and the diffusion of nuclides into rock matrix are considered one-dimensionally . In the safety assessment of the repository for radioactive waste, this one-dimensional model by the finite-difference scheme, which enables us not only to use more realistic boundary conditions but also to model the nonhomogeneous rock medium as the multilayered media, can be used effectively with the analytical mode. The solution by the numerical model will be verified analytically, and then extended to the double-layered rock medium transport model.

• Journal of Korea Water Resources Association
• /
• v.33 no.1
• /
• pp.39-50
• /
• 2000

Generally speaking, a hydrodynamic model needs a friction coefficient (Manning coefficient or Chezy coefficient) and eddy viscosity. For numerical solution the coefficients are usually determined by recursive calculations. The eddy viscosity in numerical model plays physical diffusion in flow and also acts as numerical viscosity. Hence its value has influence on the stability of numerical solution and for these reasons a consistent evaluation procedure is needed. By using records of stage and discharge in the downstream reach of the Han river, I-D models (HEC-2 and NETWORK) and 2-D model (SMS), estimated values of Manning coefficient and an empirical equation for eddy viscosity are presented. The computed results are verified through the recorded flow elevation data.n data.

• Journal of Aerospace System Engineering
• /
• v.12 no.2
• /
• pp.15-22
• /
• 2018

A compressible multiphase flow was investigated using a DIM consisting of seven equations, including the fifth-order MLP and a modified HLLC Riemann solver to achieve a precise interface structure of liquid and gas. The numerical methods were verified by comparing the flow structures of the high-pressure water and low-pressure air in the shock tube. A 2D air-helium shock-bubble interaction at the incident shock wave condition (Mach number 1.22) was numerically solved and verified using the experimental results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.286-286
• /
• 2017

자연재난은 전 세계적으로 인명 및 재산피해를 야기하고, 근래에는 기후변화로 인한 국지성 집중호우와 태풍의 발생빈도가 증가하고 있으며, 국토면적의 64%가 산지로 이루어져 있는 우리나라에서는 산지재해의 위험 가능성이 매우 높다. 이 중 토석류 재해는 붕괴된 토사가 물과 함께 섞여 높은 농도로 하류를 향해 이동하기 때문에 그 발생시점과 발생위치를 예측하기 어렵고, 토석류의 이동경로와 퇴적부 지점에 위치하고 있는 시설물 및 인명에 매우 큰 피해를 입히는 자연재해 중 하나이다. 본 연구대상지역은 충북제천시 봉양읍 공전리 일대에 위치하고 있으며, 2009년 7월 시간최대강우량 64mm, 누적강우량 455m의 집중호우로 인해 토석류가 발생하였고, 하류부에 위치한 민가와 비닐하우스, 농경지등에 피해가 발생하였다. 이에 본 연구에서는 지상LiDAR를 활용하여 고정밀도 DEM(Digital Elevation Model)을 구축하였다. 그리고 토석류 수치모형 중 미연방재난관리청(FEMA)에서 토석류 해석에 권장하고 있는 프로그램 FLO-2D모형과 일본에서 개발된 Kanako-2D모형을 적용하여 실측된 토석류 확산범위와 유출토사량을 수치모형의 결과와 비교분석하여 모형의 적용성을 검토하였다.

• Journal of the Korean earth science society
• /
• v.33 no.3
• /
• pp.280-293
• /
• 2012

In order to clarify the characteristics of dispersion of volcanic tephra emitted from the Mt. Baegdu with various eruption environment, numerical analysis were performed using numerical models, Weather Research and Forecast (WRF) and FLEXPART. Synoptic conditions at 12 October 2010 was adopted because the volcanic ash of Mt. Baegdu can reach the Korean peninsula and its dispersion pattern was compared with different Volcanic Explosivity Index (VEI) and particle size. Predominant size of falling out ash flowing in the peninsular is smaller than 0.5 mm and the ash large than the size is difficult to get in the peninsular due to the its weak ability of truculent diffusion. the difference of ash distribution with various VEI scenarios is not so much but number density of ash in the air is dramatically changed. Volcanic ash tends to be deposited easily in eastern coastal area such as Gangneung and Busan, because of the inflow of ash from East Sea and barrier effect of the Taeback mountains along the east coast of the Korean Peninsula. Accumulated amount of ash deposition can be increased in short period in several urban areas.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.161-170
• /
• 2012

There are many factors to consider when attempting to improve the efficiency of fuel cell operation, such as the operation temperature, humidity, stoichiometry, operation pressure, geometric features, etc. In this paper, the effects of the operation pressure were investigated to find the current density and water saturation behavior on a cross section designated by the design geometry. A two-dimensional geometric model was established with a gas channel that can provide $H_2$ to the anode and $O_2$ and water vapor to the cathode gas diffusion layer (GDL). The results from this numerical modeling revealed that higher operation pressures would produce a higher current density than lower ones, and the water saturation behavior was different at operation pressures of 2 atm and 3 atm in the cathode GDL. In particular, the water saturation ratios are higher directly below the collector than in other areas. In addition, this paper presents the dependence of the velocity behavior in the cathode on pressure changes, and the velocity fluctuations through the GDL are higher in the output area than in inlet area. This conclusion will be utilized to design more efficient fuel cell modeling of real fuel cell operation.