DOI QR코드

DOI QR Code

Numerical Simulation of Standing Column Well Ground Heat Pump System Part 1: Validation of the Numerical Model

단일심정 지열히트펌프의 수치적 모델링 Part I: 수치해석 모델 검증

  • Received : 2009.12.08
  • Accepted : 2010.02.18
  • Published : 2010.02.28

Abstract

Geothermal energy is gaining wide attention as a highly efficient renewable energy and being increasingly used for heating/cooling systems of buildings. The standing column well (SCW) is especially efficient, cost-effective, and suitable for Korean geological and hydrological conditions. However, a numerical model that simulates the SCW has not yet been developed and applied in Korea. This paper describes the development of the SCW numerical model using a finite-volume analysis program. The model, through hydro-thermal coupled analyses, simulates heat transfer through advection, convection, and conduction. The accuracy of the model was verified through comparisons with field data measured at SCWs in the U.S. and Korea. Comparisons indicated that the SCW numerical model can closely predict the performance of a SCW. The numerical model was used to perform a comprehensive parametric study in the companion paper.

지열은 고효율 신재생에너지로 각광을 받고 있으며 건축물의 냉난방 설비 시스템으로 활용이 점차 확산되고 있다. 지열 히트펌프 중에서 지하수를 열원으로 사용하는 단일심정(Standing column well)은 특히 효율이 높고 초기설치비용이 저렴하며 국내 지반 수리조건에 적합하다. 반면, 국내에는 아직 SCW의 성능을 평가할 수 있는 수치해석 모델이 없으며 국내 자료를 적용한 수치해석이 수행된 바 없다. 본 연구에서는 SCW 수치해석 모델을 유한체적해석 프로그램을 이용하여 구축하였다. 수치적 모델은 수리 열 연계해석을 수행하여 열이류, 대류, 전도를 모두 모사한다. SCW 모델은 미국과 국내에서 계측된 현장 데이터를 통하여 검증하였다. 비교 결과 본 연구에서 구축된 수치해석 모델은 정확하게 SCW의 거동을 예측할 수 있는 것으로 나타났다. 검증된 수치해석 모델은 동반논문에서 매개변수연구에 활용되었다.

Keywords

References

  1. 박두희, 김광균, 장재훈, 곽동엽, 나상민 (2009), "단일심정 지열 히트펌프의 수치해석 모델링 Part II: 단일심정 지열히트펌프의 성능평가를 위한 매개변수 연구", 한국지반공학회, 제26권, 제2호, pp.45-54.
  2. 송윤호, 김형찬, 심병완, 김형수 (2008), 지하 열 자원 부존.활용 정보 시스템 구축, 2005-R-GH01-P-01, 지식경제부, 과천, pp.44-56.
  3. 한정상, 한혁상, 한찬, 김형수, 전재수 (2006), "수주지열정(SCW)을 이용한 천부지열 냉난방시스템 설계지침", 자원환경지질, 제39권, 제5호, pp.607-613.
  4. Bose, J., Adams, D., Price, E., and Weaver, B. (1988), "Closed-Loop/Ground-Source Heat Pump Systems Installation Guide", Oklahoma State University. International Ground Source Heat Pump Association, Still water. Oklahoma.
  5. Braud, H., Klimkowski, H., and Oliver, J. (1983), "Earth-source heat exchanger for heat pumps", Transactions of ASAE, Vol.26, pp.1818-1822. https://doi.org/10.13031/2013.33848
  6. Chen, C., and Jiao, J.J. (1999), "Numerical simulation of pumping tests in multiplayer wells with non-darcian flow in the well bore", Groundwater, Vol.37, No.3, pp.465-474. https://doi.org/10.1111/j.1745-6584.1999.tb01126.x
  7. Chen, N. (1979), "An explicit equation for friction factor in pipe", Industrial & Engineering Chemistry Fundamentals, Vol.18, No.3, pp.296-297. https://doi.org/10.1021/i160071a019
  8. Collins, P., Orio, C., and Smiriglio, S. (2002), Geothermal Heat Pump Manual, New York City Department of Dseign and Construction, New York, NY, US.
  9. Deng, Z. (2004), Modeling of standing column wells in ground source heat pump systems, Ph.D. Thesis, Oklahoma State University, p.303.
  10. Fluent Inc. (2006), FLUENT 6.3 User's Guide, Lebanon, NH.
  11. Hellstrom, G. (1991), Ground Heat Storage. Thermal Analyses of Duct Storage Systems-Theory, Department of Mathematical Physics, University of Lund, Sweden.
  12. Kavanaugh, S., and Rafferty, K. (1997), Ground-source heat pumps: Design of geothermal systems for commercial and institutional buildings, American Society of Heating, Refrigerating and Air-Conditioning Engineers.
  13. Mikler, V. (1993), A theoretical and experimental study of the "energy well" performance, Masters thesis, The Pennsylvania State University.
  14. Oliver, J., and Braud, H. (1981), "Thermal exchange to earth with concentric well pipes", Transactions of ASAE, Vol.24, pp.906-910. https://doi.org/10.13031/2013.34362
  15. Orio, C. (1995), "Design, use and examples of standing column wells", IGSPHA Technical Meeting.
  16. Rawling, P. (2004), Geo Outlook, IGSHPA, pp.26.
  17. Rees, S. (2001), "Advances in modeling of standing column wells", International Ground Source Heat Pump Association Technical Conference & Expo, Stillwater, Oklahoma.
  18. Rees, S., Spitler, J., Deng, Z., Orio, C., and Johnson, C. (2004), "A study of geothermal heat pump and standing column well performance", Transactions of ASAE, Vol.109(1), pp.3-13.
  19. Yuill, G., and Mikler, V. (1995), "Analysis of the effect of induced groundwater flow on heat transfer from a vertical open-hole concentric-tube thermal well", TRANSACTIONS-AMERICAN SOCIETY OF HEATING REFRIGERATING AND AIR CONDITIONING ENGINEERS, Vol.101, pp.173-173.