• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.111-121
• /
• 2018

RIn this research, digital elevation models, true-ortho image and 3-dimensional digital complied data was generated and evaluated using unmanned aircraft vehicle stereoscopic images by applying photogrammetric principles. In order to implement stereoscopic vision, digital Photogrammetric Workstation should be used necessarily. For conducting this, in this study GEOMAPPER 1.0 is used. That was developed by the Ministry of Trade, Industry and Energy. To realize stereoscopic vision using two overlapping images of the unmanned aerial vehicle, the interior and exterior orientation parameters should be calculated. Especially lens distortion of non-metric camera must be accurately compensated for stereoscope. In this work. photogrammetric orientation process was conducted using commercial Software, PhotoScan 1.4. Fixed wing KRobotics KD-2 was used for the acquisition of UAV images. True-ortho photo was generated and digital topographic map was partially produced. Finally, we presented error analysis on the generated digital complied map. As the results, it is confirmed that the production of digital terrain map with a scale 1:2,500~1:3,000 is available using stereoscope method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.2
• /
• pp.201-208
• /
• 2006

Currently, 1/5,000 Digital Topographic Map covers the whole country with administrative boundary of Gu, while some region has already been constructed with 1/1,000 digital topographic map has legal boundary of Dong. Here, Dong in 1/1,000 scale represents the legal boundary which is used in the address most of time. Therefore, there is no administrative-Dong yet although it is very useful in various fields. In this study, we suggested a method to construct the administrative boundary extending to the level of Dong empirically. In addition, the practical application of the administrative boundary in GIS is discussed. Two methods are applied to construct the administrative boundary to the level of administration-Dong; using the edited cadastral map and the digital topographic map. When the edited cadastral map is used, some problems such as boundary discordance to superordinate administrative area is appeared. On the other hand, using digital topographic map showed simple construction processes and easy connection with other framework data. Therefore, it is recommended that the digital topographic map should be used in the construction of the administrative boundary. It would be useful as framework data in various industries and public operations.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.4
• /
• pp.223-234
• /
• 1991

In this paper, the harbor tranquility problem is analysed by an improved boundary integral equation method. The effect of the diffracted wave transformation induced by the breakwater and structures located at a harbor mouth is considered. Partial reflection concept is also used to consider energy dissipation effects. The present model is verified by comparing the results of the model for rectangular and semi-circular harbors with the analytic solutions. they show a reasonable agreement. Also the wave height distribution of the HUPO harbor computed using the present model agree well to those from the previous hydraulic model tests. It also shows a good agreement with the results from the time-dependent mild slope equation model.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1223-1233
• /
• 1992

Chemical and mechanical properties of workpieces and tools are important factors for selecting machining parameters in machining process planning. As there is no universal rule representing the machinability defined by metal removal rate, the selection of machining parameters still requires experience-oriented methods. In this paper, a new approach is presented to develop mathematical models for generating optimum machinability in turning processes based on chemical and mechanical properties of workpieces. Neural-Network methodology is introduced to identify mathematical models for machinability. It is confirmed by simulations that the proposed methodology can be used for developing numerical controllers with adaptive control performance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.8
• /
• pp.69-76
• /
• 2003

For stable combustion and safety of a structure of the propulsion system, a cooling system to the liquid rocket engine should be incorporated. In this study, Eulerian-Lagrangian scheme for two phase combustion, nongray radiation and soot formation effect, and film-wall interaction have been introduced to study the effect of film cooling. After briefly introducing the governing equation, combustion characteristics with change of wall temperature has been investigated by varying such parameters as fuel mass fraction for film cooling, diameter of the fuel droplet, overall mixture fraction of oxygen to fuel. Also, radiative heat flux is compared with the conductive one at the combustor wall.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.669-672
• /
• 2011

본 논문은 사하중 절감이 중요한 장지간 교량에 있어서 유리한 구조를 가지는 강바닥판의 성능 강화를 위한 수치해석 연구를 실시하였다. 이미 국내외에서는 다수의 강바닥판을 이용한 교량의 시공 사례가 많으며, 앞으로도 시공 또는 계획될 해상 장지간 교량에서도 강바닥판 교량의 사례가 많을 것으로 판단된다. 강바닥판 교량은 공기를 단축할 수 있으며, 들보의 높이가 작아서 날씬한 형상으로 할 수 있기 때문에 미관을 향상 시킬 수 있을 뿐만 아니라 가설 공사비를 절감시킬 수 있는 등 많은 장점을 갖고 있다. 하지만 강바닥판은 이상과 같이 장점을 갖는 구조이지만 비교적 얇은 강판을 복잡한 형상으로 용접하여 조립함에 용접 결함, 잔류응력, 면내 및 면외 변형의 발생 등의 문제점이 지적되고 있다. 따라서 외국에서는 강바닥판의 피로 손상에 대한 실험 및 연구로 많은 자료를 확보하고 있으며, 국내에서도 국내 현실에 맞는 강바닥판의 피로거동 및 피로강도 향상방안에 관한 연구가 더욱더 필요하다. 본 연구에서는 국내교량에 적용되고 있는 구조상세 및 구조해석을 실시하여 강바닥판의 피로거동과 응력 특성을 파악하고, 피로강도를 향상하는 방법으로 Bulkhead Plate와 수직리브 형상 및 부착에 따른 거동을 분석하고, 최적상세를 도출하여 강바닥판의 적극적인 활용화에 그 목적이 있다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.569-574
• /
• 2020

Though the discontinuous Galerkin (DG) method has been developed and applied to shallow water equations mainly in explicit schemes, they have been criticized for the limitation in treatment of bottom friction terms and severe CFL conditions. In this study, an implicit scheme is devised and applied to some representative benchmark problems. The linear triangular elements were employed and the Roe numerical fluxes were adopted for convective fluxes. To preserve TVD property, the slope limiter was employed. As the case studies, the model is applied to the flow around the cylinders and the dam-break flow. Then, the results are compared with the experimental and numerical data of previous studies and good agreements were observed.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.103-112
• /
• 2019

Extraction of region of interest for satellite image classification is one of the important techniques for efficient management of the national land space. However, recent studies on satellite image classification often depend on the information of the selected image in selecting the region of interest. This study propose an effective method of selecting the area of interest using the continuous digital topographic map constructed from high resolution images. The spatial information used in this research is based on the digital topographic map from 2013 to 2017 provided by the National Geographical Information Institute and the 2015 Sejong City land cover map provided by the Ministry of Environment. To verify the accuracy of the extracted area of interest, KOMPSAT-3A satellite images were used which taken on October 28, 2018 and July 7, 2018. The baseline samples for 2015 were extracted using the unchanged area of the continuous digital topographic map for 2013-2015 and the land cover map for 2015, and also extracted the baseline samples in 2018 using the unchanged area of the continuous digital topographic map for 2015-2017 and the land cover map for 2015. The redundant areas that occurred when merging continuous digital topographic maps and land cover maps were removed to prevent confusion of data. Finally, the checkpoints are generated within the region of interest, and the accuracy of the region of interest extracted from the K3A satellite images and the error matrix in 2015 and 2018 is shown, and the accuracy is approximately 93% and 72%, respectively. The accuracy of the region of interest can be used as a region of interest, and the misclassified region can be used as a reference for change detection.

• Journal of Oral Medicine and Pain
• /
• v.26 no.3
• /
• pp.225-241
• /
• 2001

구취에 대한 환자의 주관적 감각은 다양한 심리학적 요소들에 의하여 영향을 받을 가능성이 있다. 본 연구에서는 구취 환자의 심리학적 특징을 살펴보기 위하여, 구취를 주소로 내원한 환자 446명과 일반적인 치과 치료를 위하여 내원한 환자 63명을 대상으로 간이정신진단검사 (SCL-90-R), 구취 설문검사, 구취 측정 검사를 시행하여 분석한 결과 아래와 같은 결론을 얻었다. 1. 남성 구취 환자와 여성 구취 환자의 연령분포는 통계학적으로 유의한 차이를 보였다 (p<0.001). 남성에서는 20대, 30대, 40대에 고르게 분포한 반면, 여성에서는 20대와 30대에 집중되어 분포하였다. 2. 구취의 인식 유형은 남녀간에 통계학적으로 유의한 차이를 보였다 (p<0.01). 구취 인식 유형 중 타인에 의한 지적이나 타인의 행동으로 인한 추측 없이 스스로 구취를 인지하는 유형은 여성 구취 환자에서만 관찰되었다. 3. 구취 환자는 대조군에 비하여 강박증, 불안, 적대감, 전체심도지수에서 높은 수치를 보였다 (p<0.05). 4. 여성 구취 환자는 남성 구취 환자에 비하여 강박증(p<0.05), 불안 (p<0.05), 편집증 (p<0.001)에서 높은 수치를 보였다. 5. 남성 구취 환자에서는 표출증상합계를 (p<0.05) 제외한 모든 간이정신진단검사 항목에서 고농도 VSC군과 저농도 VSC군간에 유의한 차이를 보이지 않았다. 여성 구취 환자에서는 저농도 VSC군이 신체화를 제외한 모든 간이정신진단검사 항목에서 고농도 VSC군에 비하여 높은 수치를 보였다 (p<0.05). 6. 여성 구취 환자에서 주관적 구취심도는 강박증, 대인예민성, 불안, 적대감, 공포불안, 전체심도지수, 표출증상심도지수 들과 유의한 상관관계를 보였고 (p<0.05), 주관적 구취불편감은 모든 간이정신진단검사 항목들과 유의한 상관관계를 보였다 (p<0.05).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.121-134
• /
• 2013

The transverse cylindrical projection has been used in Korea since 1910s when the nationwide geodetic network was firstly established. However, the projection has a number of different types of functions according to a way of its mathematical derivation as well as a section of its coefficients and terms, for instance Gauss- Schreiber(GS) and Gauss-Kruger(GK) types. Although the transverse cylindrical projection itself is assigned to a system, projected coordinates would be diverse with respect to the function used in the actual calculation. In order to investigate impact of functions used in the computation, five different equations (i.e., 2 GS and 3 GK) were implemented in this study by using MATLAB. A series of numerical simulation tests has been carried out to compare and characterize them in terms of projection accuracy, difference of projected coordinates and distortion. Furthermore, a comparison between GS and GK function was made under the Korean gridding system, consisting of four zones. Results from the numerical computations were qualitatively analyzed and summarized in this paper.