• 제목/요약/키워드: 수축부

Search Result 321, Processing Time 0.023 seconds

동굴 탐사 기술 3 - 영양과 탐사

  • 김건철
    • Journal of the Speleological Society of Korea
    • /
    • no.44
    • /
    • pp.64-78
    • /
    • 1995
  • 영양은 신진대사 기능을 조절하고 신체 및 정신 활동으로 소모된 부분을 보충하여 생명체가 존속하고 활동하는데 반드시 필요한 양분이다. 또한 영양소는 대사작용에 이용되는 기본 물질이며 탄수화물, 지방, 무기질, 비타민, 수분 등의 6가지가 있다. 신체의 정상적인 기능과 효율적인 작용에 영향을 미치는 영양소는 그 작용에 따라 주영양소인 근 수축에 필요한 에너지를 공급하는 열량소, 부영양소인 생리적 작용을 조절하여 질병을 예방하는 조절소, 그리고 신체 기관과 조직을 구성하는 구성소로 구성된다.(중략)

  • PDF

A Study on the Effect of Water Soluble Extractive upon Physical Properties of Wood (수용성(水溶性) 추출물(抽出物)이 목재(木材)의 물리적(物理的) 성질(性質)에 미치는 영향(影響))

  • Shim, Chong-Supp
    • Journal of the Korean Wood Science and Technology
    • /
    • v.10 no.3
    • /
    • pp.13-44
    • /
    • 1982
  • 1. Since long time ago, it has been talked about that soaking wood into water for a long time would be profitable for the decreasing of defects such as checking, cupping and bow due to the undue-shrinking and swelling. There are, however, no any actual data providing this fact definitly, although there are some guesses that water soluble extractives might effect on this problem. On the other hand, this is a few work which has been done about the effect of water soluble extractives upon the some physical properties of wood and that it might be related to the above mentioned problem. If man does account for that whether soaking wood into water for a long time would be profitable for the decreasing of defects due to the undue-shrinking and swelling in comparison with unsoaking wood or not, it may bring a great contribution on the reasonable uses of wood. To account for the effect of water soluble extractives upon physical properties of wood, this study has been made at the wood technology laboratory, School of Forestry, Yale university, under competent guidance of Dr. F. F. Wangaard, with the following three different species which had been provided at the same laboratory. 1. Pinus strobus 2. Quercus borealis 3. Hymenaea courbaril 2. The physical properties investigated in this study are as follows. a. Equilibrium moisture content at different relative humidity conditions. b. Shrinkage value from gre condition to different relative humidity conditions and oven dry condition. c. Swelling value from oven dry condition to different relative humidity conditions. d. Specific gravity 3. In order to investigate the effect of water soluble extractives upon physical properties of wood, the experiment has been carried out with two differently treated specimens, that is, one has been treated into water and the other into sugar solution, and with controlled specimens. 4. The quantity of water soluble extractives of each species and the group of chemical compounds in the extracted liquid from each species have shown in Table 36. Between species, there is some difference in quantity of extractives and group of chemical compounds. 5. In the case of equilibrium moisture contents at different relative humidity condition, (a) Except the desorption case at 80% R. H. C. (Relative Humidity Condition), there is a definite line between untreated specimens and treated specimens that is, untreated specimens hold water more than treated specimens at the same R.H.C. (b) The specimens treated into sugar solution have shown almost the same tendency in results compared with the untreated specimens. (c) Between species, there is no any definite relation in equilibrium moisture content each other, however E. M. C. in heartwood of pine is lesser than in sapwood. This might cause from the difference of wood anatomical structure. 6. In the case of shrinkage, (a) The shrinkage value of the treated specimen into water is more than that of the untreated specimens, except anyone case of heartwood of pine at 80% R. H. C. (b) The shrinkage value of treated specimens in the sugar solution is less than that of the others and has almost the same tendency to the untreated specimens. It would mean that the penetration of some sugar into the wood can decrease the shrinkage value of wood. (c) Between species, the shrinkage value of heartwood of pine is less than sapwood of the same, shrinkage value of oak is the largest, Hymenaea is lesser than oak and more than pine. (d) Directional difference of shrinkage value through all species can also see as other all kind of species previously tested. (e) There is a definite relation in between the difference of shrinkage value of treated and untreated specimens and amount of extractives, that is, increasing extractives gives increasing the difference of shrinkage value between treated and untreated specimens. 7. In the case of swelling, (a) The swelling value of treated specimens is greater than that of the untreated specimens through all cases. (b) In comparison with the tangential direction and radial direction, the swelling value of tangential direction is larger than that of radial direction in the same species. (c) Between species, the largest one in swelling values is oak and the smallest pine heartwood, there are also a tendency that species which shrink more swell also more and, on the contrary, species which shrink lesser swell also lesser than the others. 8. In the case of specific gravity, (a) The specific gravity of the treated specimens is larger than that of untreated specimens. This reversed value between treated and untreated specimens has been resulted from the volume of specimen of oven dry condition. (b) Between species, there are differences, that is, the specific gravity of Hymenaea is the largest one and the sapwood of pine is the smallest. 9. Through this investigation, it has been concluded that soaking wood into plain water before use without any special consideration may bring more hastful results than unsoaking for use of wood. However soaking wood into the some specially provided solutions such as salt water or inorganic matter may be dissolved in it, can be profitable for the decreasing shrinkage and swelling, checking, shaking and bow etc. if soaking wood into plain water might bring the decreasing defects, it might come from even shrinking and swelling through all dimension.

  • PDF

Relation of the Fertility and Grain Weight of Wheat and Barley to their Spike Differentiation and Development (대소맥에 있어서 소수 및 소화의 분화, 발육정도가 임성 및 립중에 미치는 영향)

  • 남윤일;하용웅
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.27 no.2
    • /
    • pp.116-122
    • /
    • 1982
  • In three diverse wheat and one barley cultivars were used to examine the relation of the spikelet and floret differentiation to fertility and an winter wheat Norin 61 was used to examine the spikelet size gradients in the mature ear in relation to their grain development. The greatest number of grains and florets per spikelet, and the heaviest grains occurred in the low-mid part of the ear. Within the spikelets, the 2nd grain from the base was heavier than the I st or the 3rd one. In this region, the fertility of the 1 st floret was 97%, the 2nd 93%, the 3rd 88%, and 4th floret was 15%. The fertility of the wheat and barley was closely related to spikelet and floret differentiation. Barley spikelets was fertile as their differentiation stage was X that is 25 days before heading. Wheat florets were fertile as their differentiation stage was X that is 15-20 days before heading. But, they were sterile or reduced in fertility if they were not reached to the stage X.

  • PDF

Metallurgical Structures and Mechanical Properties in Weldments of Dissimilar Cr-Mo Steels (Cr-Mo계 이종재질간 용접부의 미세조직 및 기계적성질)

  • 지병하;김정태;박화순
    • Proceedings of the KWS Conference
    • /
    • 1996.10a
    • /
    • pp.42-44
    • /
    • 1996
  • 이종재료인 2$\frac{1}{4}$Cr-1Mo강과 12Cr-1Mo-V계 강의 용접부의 용접성에 대하여 모재계열의 용접재료와 Inconel계의 용접재료를 사용하여 야금학적인 관점으로부터 미세조직적 특성 및 기계적성질을 중심으로 검토하였다. 그 결과를 요약하면 다음과 같다. (1) 본 연구의 실험범위에 의하면, 내부결함, 균열 등의 용접결함을 발생하지 않는 양호한 용접부를 얻을 수 가 있었다. (2) 광학현미경을 이용한 미세조직의 관찰에 의하면, Inconel계의 용접재료를 제외한 모재계열의 용접재료를 사용하였을 경우, 용융경계부 근방에서 연속 또는 불연속적인 백색의 밴드상이 형성되었다. (3)백색밴드상의 형성부는 인장변형에 의하여 국부적인 수축변형을 일으키나, 파단은 2$\frac{1}{4}$Cr-1Mo강의 모재에서 발생하였으며, 거시적인 인장성질에는 영향을 미치지 않았다.

  • PDF

Development of Calibration Jet System for Calibrating a Flow Sensor (유동센서 보정용 캘리브레이션 제트 시스템 개발)

  • Chang, J.W.;Byun, Y.H.
    • Journal of the Korean Society for Aviation and Aeronautics
    • /
    • v.11 no.1
    • /
    • pp.41-55
    • /
    • 2003
  • A calibration jet system using separate blower is developed to calibrate a flow sensor effectively. Designed open circuit type mini calibration jet system, which has the dimension of $0.5m(W){\times}1.17m(H)$ is small compared with conventional calibration jet systems. The exit of nozzle has exchangeable contractions with a cross section area of $38.5cm^2$ , and a cross section area of $113.1cm^2$, respectively. The ranges of wind speed at exit of exchangeable nozzles are $7.5{\sim}42\;m/s$ and $1.8{\sim}16.5\;m/s$, respectively. The input power for the high pressure blower is 1.18kW. The turning vanes for corner was rolled flat plate parallel to the flow direction. The flow conditioning screen was located immediately downstream of the wide-angle diffuser. The honeycomb and two flow conditioning screens were located in the stagnation chamber. From the economical point of view and the simplicity of the calibration jet system set up and handling, it can be said that the developed calibration jet system is an effective calibration jet system. This system can also be used to calibrate the flow sensor with high resolution.

  • PDF

Study on centerline turbulent structures of circular contraction and expansion ducts (수축부와 확대부의 중심 유동에서 나타나는 대칭적 난류구조에 관한 연구)

  • Han,Yong-Un;Lee, Jang-Hwan
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.22 no.2
    • /
    • pp.221-228
    • /
    • 1998
  • In order to look into the comparative flow characteristics between a circular contraction duct and a circular expansion duct the both centerline turbulent structures have been investigated by the hot wire anemometry. Both of the contraction and the expansion have Morel type contours. Means, turbulences, and triple moments have been measured for the turbulent kinetic energy budgets along their centerlines. It is resulted that mean velocities of both have much deviated from theoretical values calculated by one-dimensional continuity considerations, and that for the same upstream condition, the expansion maintains the isotropy in general while the contraction maintains a severe anisotropy through the whole duct. The mean transport of the TKE along the expansion is willing to balance mostly with the dissipation in the TKE budgets while that along the contraction is balanced with the production in the turbulent kinetic energy equation.

Design of the Blood Pressure Measurement System Using the Inflatable Oscillometric Method (가압식 오실로메트릭 방법을 사용한 혈압측정 시스템의 설계)

  • 노동곤;이윤선;지정호;박성빈;이계형;김해관
    • Journal of Biomedical Engineering Research
    • /
    • v.24 no.4
    • /
    • pp.281-286
    • /
    • 2003
  • Blood Pressure is one of the most fundamental Parameters which reflects physical conditions medically and the blood pressure measurement system using oscillometric method is a Non-Invasive Blood Pressure measurement device by measuring arterial Pressure through a cuff. In this paper. we designed a inflatable wrist blood pressure system which measures blood Pressure during the stepping inflation in the wrist cuff. The hardware system consists of a main power unit, a bladder in cuff unit, signal detection units, signal Processing units. a wireless data transmission unit, and a data display unit. We evaluated the reliability of this system by comparing and analyzing systolic. diastolic blood Pressure, and heart rate with other commercial blood Pressure measurement devices. Characteristic ratio values used to determine systolic and diastolic blood Pressure using MAA(Maximum Amplitude Algorithm) were 0.436 and 0.671 respectively.

A Graphical Method for Evaluation of Stages in Shrinkage Cracking Using S-shape Curve Model (S형 곡선 모델을 적용한 수축 균열 단계 평가)

  • Min, Tuk-Ki;Vo, Dai Nhat
    • Journal of the Korean Geotechnical Society
    • /
    • v.24 no.9
    • /
    • pp.41-48
    • /
    • 2008
  • The aim of this study is to present a graphical method in order to evaluate stages in shrinkage cracking. Firstly, the distribution of crack openings is established by sorting the openings of individual cracks in the soil cracking system. Secondly, it is normalized in a range of 0 to 1 to obtain the normalized crack opening distribution. Thirdly, three S-shape curve models introduced by Brooks and Corey(1964), Fredlund and Xing(1994) and van Genuchten(1980) are chosen to fit the normalized crack opening distribution using a curve fitting method. The accuracy of fitting which is described through fitting parameters by the van Genuchten equation is much higher than that by the Brooks and Corey equation and slightly higher than that by the Fredlund and Xing equation; thus the van Genuchten model is used. Finally, the stages of shrinkage cracking are graphically evaluated by drawing three separate straight lines corresponding to three linear parts of the fitted normalized crack opening distribution. The proposed method is tested with different sample thicknesses. The measured data are fitted by the selected model with the fairly high regression coefficient and small root mean square error. The results show graphically that shrinkage cracking comprises three stages; namely, primary, secondary and residual stages. Subsequently, the ranges of evaluated crack opening for each of these stages are presented.

Conservation Treatment for Wooden Frame of Armor Excavated From Im-dang, Gyeong-san (경산 임당출토 목제 갑옷틀 보존)

  • Yi Yong-Hee;Kim Soo-Chul
    • 한국문화재보존과학회:학술대회논문집
    • /
    • 2005.11a
    • /
    • pp.246-251
    • /
    • 2005
  • 경산 임당유적에서 출토된 목제 갑옷틀은 수침된 상태로 출토된 목제유물로 재질이 매우 취약하여, 대기 중에 노출되면 급속도로 건조가 진행되어 곧바로 수축 변형이 일어나 유물로써 가치를 잃어버리게 된다. 특히 목제 갑옷틀은 오랜 매장기간동안 목질부의 분해가 많이 진행되어 재질이 취약할 뿐 아니라 원통목을 가공한 것이어서 건조 과정에서 수축변형이 발생우려가 높다. 따라서 목제 갑옷틀은 건조변형이 적고 치수안정화가 우수한 처리법을 적용하여야 한다. 따라서 목제 갑옷틀은 t-butanol 용액을 용제로 PEG#4000 40%로 함침 전처리 후 진공 동결건조법으로 보존처리 하였다.

  • PDF

Development of A Three-Dimensional Euler Solver for Analysis of Contraction Flow (수축부 유동 해석을 위한 삼차원 Euler 방정식 풀개 개발)

  • Kim J.;Kim H. T.
    • 한국전산유체공학회:학술대회논문집
    • /
    • 1995.10a
    • /
    • pp.175-181
    • /
    • 1995
  • Three-Dimensional Euler equations are solved numerically for the analysis of contraction flows in wind or water tunnels. A second-order finite difference method is used for the spatial discretization on the nonstaggered grid system and the 4-stage Runge-Kutta scheme for the numerical integration in time. In order to speed up the convergence, the local time stepping and the implicit residual-averaging schemes are introduced. The pressure field is obtained by solving the pressure-Poisson equation with the Neumann boundary condition. For the evaluation of the present Euler solver, numerical computations are carried out for the various contraction geometries, one of which was adopted in the Large Cavitation Channel for the U.S. Navy. The comparison of the computational results with the available experimental data shows good agreements.

  • PDF