• Journal of the Korean Geotechnical Society
• /
• v.28 no.9
• /
• pp.31-45
• /
• 2012

This study was conducted to estimate the stability of a quay wall in case of wave overtopping under the combined action of an earthquake and tsunami using limit equilibrium method. The tsunami force was calculated by using a numerical program called TWOPM-3D (3-D one-field Model for immiscible TWO-Phase flows). Especially, the wave force acting behind the quay wall after a tsunami wave overtopping was estimated by treating back fill as a permeable material. The stability of the quay wall was assessed for both the sliding and overturning modes under passive and active conditions. The variation in the stability of the quay wall with time was determined by parametric studies, including those for the tsunami wave height, seismic acceleration coefficient, internal friction angle of the soil, wall friction angle, and pore water pressure ratio. When the earthquake and tsunami were considered simultaneously, the tsunami induced wave overtopping increased the stability of the quay wall under the passive condition, but in the active condition, the safety factors decreased.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.4
• /
• pp.13-25
• /
• 2012

This study aims to experimentally investigate the characteristics of secondary flows in a natural channel. For this objective, various conditions of water discharge and depth are tested in a real-scale experimental channel which has 1.2 of meandering. From results of experiments, it is observed that the maximum flow velocity exists in the outer zone of ben. This result is different from the previous studies conducted with laboratory experiments. The bank of 1:2 slope replicating the condition of natural channel is considered to cause this result. The location of the maximum flow velocity moves to the center of channel as the channel changes to be straight. It is also known from this study that two vorteces coexist on the left and right banks of bend.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.123-134
• /
• 2012

This work is to describe the geomorphological landscapes of of Dongcheon-gugok in Korea, and attempts to develop a basic data for traditional natural heritage. Dongcheon-gugok is a union of natural lanscape and human mind-activity. Therefore the study of natural landscape, which consists of geomorphological landscapes, provides a basic data for the use and conservation of traditional natural heritage. Dongcheon-gugok in Korea is almost distributed in the valley of mountainous areas of Taeback and Soback Mountain Ranges. The bedrocks of the areas of Dongcheon-gugok are almost granitic rocks and sedimentary rocks. The landscapes of Dongcheon-gugok is characterized by narrow meandering valley, so Gugok means nine-bended river. The elements of the geomorphological features is a broad flat rock with sheeting joints, joint-block seperated large blocks or tor, steep slope and rocky cliffs, pool, ripple, large or small scale waterfall, pot-hole, etc.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.360-360
• /
• 2020

조립식 빗물침투형 저류블록은 우수유출 저감시설로, 황토 및 친환경 무기질 결합재를 이용하여 제작한 고강도 투수성 블록의 적층 및 요철에 의한 끼움식 조립에 의해 형성된 공간에 빗물을 저류하고, 저장된 빗물은 시간이 지남에 따라 지반으로 침투시키는 우수유출 저감용 빗물관리시설로, 집중강우 시 유출수가 발생하는 해당지역에 분산식으로 설치하여 국지적 호우 발생에 대처할 수 있으며, 지속적인 침투를 통한 지하수위 확보 및 가뭄현상의 저감은 물론, 미기후 조성과 건전한 물순환 구조 형성에 이바지하는 빗물관리기술이다. 본 기술은 집중형 대규모 빗물저류조의 적용상의 문제점과 단순저류의 한계성을 극복하고, 기존 침투시설의 낮은 침투능을 증대시키고자 저류기능과 침투기능을 동시에 확보하여 집중호우시 빠른 침투저류능을 향상시킨 조립식 빗물침투형 저류시설이다. 보다 구체적으로는 집중강우에 대한 방재적 측면과 함께 가뭄으로 발생하는 지하수위 저하 등에 친환경적으로 대응하기 위한 복합적인 빗물관리 기술로서, 빗물 유출저감과 함께 물순환 회복 및 저영향개발을 위한 각 지자체의 지침과도 부합될 수 있다. 또한, 콘크리트 제품의 환경적 문제점과 플라스틱 제품의 낮은 물성을 극복하였고, 시공 시에는 보다 현장상황에 맞게 가변적 형태로 적용이 가능한 단순조립 적층공법으로 공기단축에 탁월한 장점이 있으며, 유지관리 시에는 별도의 동력이 요구되지 않는 형태로 개발하였다. 조립식 빗물침투저류블록의 구조체를 이루는 단위 블록유닛은 투수성 소재로 제작되며, 상하부가 개방되어 있고 사각형의 내부에 힘을 받는 격벽과 전후벽이 상호 대응되는 요철로 형성되어 있으며, 단위블록 유닛 다수개가 수직수평으로 연속적으로 조립되어 규모의 제한, 형태의 제한이 없는 구조물 형성이 가능하다. 본 구조체의 저류공극율은 80%이상 확보 가능하며, 또한 블록자체의 투수율이 0.83mm/sec로서 순모래나 순자갈의 포화투수계수보다 투수율이 높아 침투저류 효율성이 높으며 시공 후 상부 토지는 자유롭게 활용 가능하다. 본 조립식 빗물 침투형 저류블록을 이용하여 저영향개발 계획, 우수유출 저감대책 수립, 빗물관리시설 계획시 기존의 시설들에 비하여 경제적, 효율적인 설계가 가능하다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.233-233
• /
• 2021

ADCP(Acoustic Doppler Current Profiler)는 유수의 흐름을 방해하지 않으면서 수중에 발사된 음파의 도플러 효과를 이용하여 3차원 유속 측정이 가능한 초음파 유량측정장비이다. 2009년부터 다양한 하천에서 ADCP 사용량이 증가하면서 ADCP를 이용한 유량측정 기법과 현장 적용상의 문제, 자료처리 과정에서의 문제점들이 발생하고 있다. 이런 문제점들을 분석한 결과 다음과 같은 사례들이 나타났다. 첫 번째 하상이 매우 불규칙한 단면의 부적절한 측정 사례, 두 번째 하안 수직벽 존재에 따른 단면의 부적절한 측정 사례, 세 번째 수심 오측이 다수 발생한 측정 사례, 네 번째 유속 프로파일 결측이 다수 발생한 측정 사례, 다섯 번째 통신문제로 인한 주기적인 결측이 발생한 측정 사례, 여섯 번째 홍수기 고농도 유사로 인해 결측이 발생한 사례, 일곱 번째 수중식생의 영향으로 수심 및 유속 프로파일 오측이 발생한 측정 사례, 여덟 번째 이동상 조건이 발생한 측정 사례 등 많은 문제들이 발생하였다. 본 연구에서는 수중식생의 영향으로 수심 및 유속 프로파일 오측이 발생하는 사례에 대해 개선할 수 있는 방안을 연구하였다. ADCP에서 수중에 발사한 음파 중 식생에 부딪친 강한 반사파의 노이즈로 side-lobe현상에 의한 오측 및 결측이 발생한다. 현재 오측 및 결측 자료는 ADCP 제조사별 자료 취득 소프트웨어의 기능에 의존 하거나, USGS의 OSW(Office of Surface Water) Hydroacoustics의 QRev를 이용하여 후처리 과정을 거쳐 측정 자료로 정리하고 있다. 이에 본 연구에서는 노이즈로 인한 side-lobe 현상을 물리적인 방법으로 제거하기 위해 음향 녹음 과정에서 노이즈를 물리적인 방법으로 제거하는 윈드실드와 팝 필터를 고려한 ADCP필터를 개발하여 적용하였다. 이번 연구의 대상지점은 원주시(지정대교)수위관측소로 5월 이후 수중에 식생이 성장하는 지점이다. 먼저 ADCP필터를 제거한 상태에서 측정을 실시하고, 이후 ADCP필터를 장착하여 측정을 실시하였다. ADCP필터 적용의 측정성과에서는 노이즈에 의한 오측 및 결측이 다수 발생하는 것을 볼 수 있고, ADCP필터를 적용한 측정성과에서는 노이즈가 제거되어 오측 및 결측이 개선되는 결과를 볼 수 있었다. 본 연구에서는 수중식생 영향으로 강한 반사파에 의한 노이즈로 side-lobe현상에 의한 ADCP측 정성과의 오측 및 결측을 ADCP필터를 적용하여 물리적인 방법으로 노이즈를 제거 할 수 있다는 결과를 얻었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.6
• /
• pp.18-28
• /
• 2015

The purpose of this study is to develop a new seismic resistant method by using precast concrete wall panels for existing low-rise, reinforced concrete beam-column buildings such as school buildings. Three quasi-static hysteresis loading tests were performed on one unreinforced beam-column specimen and two reinforced specimens with U-type precast wall panels. The results were analyzed to find that the specimen with anchored connection experienced shear failure, while the other specimen with steel plate connection principally manifested flexural failure. The ultimate strength of the specimens was determined to be the weaker of the shear strength of top connection and flexural strength at the critical section of precast panel. In this setup of U-type panel specimens, if a push loading is applied to the reinforced concrete column on one side and push the precast concrete panel, a pull loading from upper shear connection is to be applied to the other side of the top shear connection of precast panel. Since the composite flexural behavior of the two members govern the total behavior during the push loading process, the ultimate horizontal resistance of this specimen was not directly influenced by shear strength at the top connection of precast panel. However, the RC column and PC wall panel member mainly exhibited non-composite behavior during the pull loading process. The ultimate horizontal resistance was directly influenced by the shear strength of top connection because the pull loading from the beam applied directly to the upper shear connection. The analytical result for the internal shear resistance at the connection pursuant to the anchor shear design of ACI 318M-11 Appendix-D, agreed with the experimental result based on the elastic analysis of Midas-Zen by using the largest loading from experiment.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.323-329
• /
• 2006

The aim of this study was to evaluate the retrievability of Resilon as a root canal filling material Twenty-seven human single-rooted extracted teeth were instrumented utilizing a crown down technique with Gates-Glidden burs and ProFile system. In group1 (n = 12) canals were obturated with gutta percha and AH-26 plus sealer using a continuous wave technique and backfilled. In group 2 (n = 15) Resilon was used as a filling material. Then teeth were sealed and kept in $37^{\circ}C$ and 100% humidity for 7 days. For retreatment, the samples were re-accessed and filling material was removed using Gates-Glidden burs and ProFiles. Teeth were sectioned longitudinally to compare the general cleanliness and amount of debris $({\times}\;75)$ using SEM. Chi-square test was used $({\alpha}\;=\;0.05)$ to analyze the data. The total time required for removal of filling materials was expressed as mean ${\pm}SD$ (min) and analyzed by the Student t-test $({\alpha}\;=\;0.05)$, Required time for retreatment was $3.25\;{\pm}\;0.32$ minutes for gutta percha/ AH 26 plus sealer and $3.05\;{\pm}\;0.34$ minutes for Resilon. There was no statistically significant difference between the two experimental groups. There was no significant difference between the groups in the cleanliness of the root canal wall. This study showed that Resilon was effectively removed by Gates-Glidden burs and ProFiles.

• Journal of Conservation Science
• /
• v.9 no.1
• /
• pp.21-32
• /
• 2000

Rock composition of the Hwangsang-dong Granite Standing Sculptured Buddha (Treasure No. 1122) in the Kumi City is biotite-hornblende granodiorite which consists of about 30 pieces of individual rock blocks of same compositions. However, the cap rocks is pebble-bearing coarse sandstone. Rock blocks of the Standing Buddha and surrounding out crops occur well developed several joint systems of $N25^{\circ}$ to $45^{\circ}W$ strike and nearly vertical (70 to $85^{\circ}SE$) dipping. Rock blocks of the Standing Buddha showed vertical, horizontal and oblique joints, and those blocks are well supported by individual blocks. However, the junction part of the blocks are under dangerous situation due 10 seriously mechanical and chemical weathering. Host rock of the Standing Buddha belongs to the HW grade, therefore mostly rock-forming minerals of the granodiorite Standing Buddha altered with clay and iron hydroxide minerals by mineralogical and chemical weathering. Near surface of the Standing Buddha show spore and mycelium of green algaes, and a joint plane alive with weeds. We suggest that if structural stability for the Standing Buddha remove essentially a unstable rock blocks from the main body, and the main body necessitate supporting by rock bolting method because of repeated unstability and minimizing stress to the rock blocks. For the opened joint planes, fractured surface and alive weeds will attempt to fill in a petro-epoxy, petro-filler and biochemical treatments for the algaes, and ground water curtain and wall seems to be necessary for water flow and diminishing humidity of the Standing Buddha.

• Research in Plant Disease
• /
• v.8 no.3
• /
• pp.166-170
• /
• 2002

Powdery mildew of mug bean was found in Suwon on September 2000. Many white and powdery mycelial colonies appeared on leaves of the plants. Conidia with fibrosin bodies were ellipsoid to elongate-ellipsoid, 25~38$\times$16~22 ${\mu}{\textrm}{m}$ in size and farmed in chains. Conidiophores were erect on superfical mycelium, 67~100 ${\mu}{\textrm}{m}$ in length. Foot cells were cylindric with 37~65$\times$10~11 ${\mu}{\textrm}{m}$ in size. Appressoria were indisdinct. Germ tubes from conidia were simple, not branched. Dark brown cleistothecia were observed on the leaves of mung bean. Cleisto-thecia were globose or subglobose, 85~1130 ${\mu}{\textrm}{m}$ in size. Wall cells were irregularly polygonal with 15~45$\times$7~26 ${\mu}{\textrm}{m}$. Appendages were mycelioid, 6-11 per ascocarp, coloured, throught when mature or paler upwards, 1~7 septa, 192~223$\times$5~7 ${\mu}{\textrm}{m}$ in size. A single sun had in a cleistothecium and was ovoid or subglobose with 62~95$\times$50~67 ${\mu}{\textrm}{m}$ in size. Ascusspore had 8 spores in an ascus and rarely developed, mostly imatuna ellipsoid-ovoid with 16~24$\times$12~16 ${\mu}{\textrm}{m}$. On the basis of morphological characters of the conidial stage and teleo-morph, the fungus was identified as Sphaerotheca phaseoli.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.326-339
• /
• 1995

In this paper, the validity of the numerical model of fishes' behavior presented in our earlier paper was examined by the whiteness test on the residual of numerical model and by the comparison between experiment and simulation on several indexes represented by fishes' swimming characteristics. The validity of the numerical model was proved statistically by means of the whiteness test of the residual. The similarity was confirmed by comparison between experiment and simulation for the swimming trajectory of fishes, the mean distance of individual from wall, the mean swimming speed and the mean distance between the nearest individuals. These results suggest that the behavior of fishes according to the flow speed in three-dimensional space can be estimated partially by the numerical model presented in our earlier paper. However, a long-term approach to improve the modeling technique on the behavior of fishes may be needed before applying the numerical model presented in our earlier paper to real fishing ground.