• Title/Summary/Keyword: 수직자기기록

Search Result 105, Processing Time 0.029 seconds

Performance Of Iterative Decoding Schemes As Various Channel Bit-Densities On The Perpendicular Magnetic Recording Channel (수직자기기록 채널에서 기록 밀도에 따른 반복복호 기법의 성능)

  • Park, Dong-Hyuk;Lee, Jae-Jin
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.7C
    • /
    • pp.611-617
    • /
    • 2010

  • In this paper, we investigate the performances of the serial concatenated convolutional codes (SCCC) and low-density parity-check (LDPC) codes on perpendicular magnetic recording (PMR) channels. We discuss the performance of two systems when user bit-densities are 1.7, 2.0, 2.4 and 2.8, respectively. The SCCC system is less complex than LDPC system. The SCCC system consists of recursive systematic convolutional (RSC) codes encoder/decoder, precoder and random interleaver. The decoding algorithm of the SCCC system is the soft message-passing algorithm and the decoding algorithm of the LDPC system is the log domain sum-product algorithm (SPA). When we apply the iterative decoding between channel detector and the error control codes (ECC) decoder, the SCCC system is compatible with the LDPC system even at the high user bit density.

  • PDF KSCI

Effect of Oxygen on the Magnetic and Recording Characteristics of Magneto-Optical Disk (광자기 디스크의 기록 및 자기적 특성에 산소가 미치는 영향)

  • Choe, G.
    • Journal of the Korean Magnetics Society
    • /
    • v.3 no.3
    • /
    • pp.229-233
    • /
    • 1993

  • The effects of differential partial pressures of oxygen during sputtering on the magnetic and recording characteristics of magneto-optical disks were investigated. Different flows of oxygen were deliberately introduced into the sputtering chamber to have a variety of partial pressures of oxygen during sputtering. A residual gas analyzer was employed to monitor the oxygen peak before, during, and after sputtering and to estimate the reacted oxygen amount. Most of the oxygen introduced into the chamaber was reacted during sputtering. As the partial pressure of oxygen increased, the oxygen content of the TbFeCoCr film increased also. The oxygen appeared to be bound as Tb-O, effectively decreasing the magnetically active Tb content of the film The coercivity decreased but the squareness of the Kerr hysteresis loops was still excellent. The perpendicular anisotropy was not significantly affected by oxygen amount. The carrier-to-noise ratio, includi!1g the write power sensitivity and bias field sensitivity did not change too much with oxygen content in the film The disks sputtered with oxygen showed better bias field sensitivity with lower write power threshold than the disk sputtered without oxygen, due to high demagnetization during domain formation. No significant degradation of coercivity for the disk sputtered oxygen was observed during an accelerated aging test.

  • PDF

박막자기기록재료

  • 이택동
    • Electrical & Electronic Materials
    • /
    • v.1 no.3
    • /
    • pp.197-208
    • /
    • 1988

  • 현재 특히 컴퓨터용 외부 기록매체분야에서 재래식 자성분말 코팅형 매체에 대해서 여러가지 보다 우수한 특성을 가진 경합재료가 경쟁적으로 개발되고 있다. 먼저 면재기록방식의 경우에 괄목할 발전을 하고 있는 것은 Co-Ni-P 및 Co-Ni계 무전해 혹은 스파터된 hard disk용 박막이다. 아직 오버코팅 문제가 완전히 해결되지 않고 그외 기판문제 등에서 개선의 여지가 많지만 그 수요가 급격히 늘고 있다. 그 다음으로 수직기록 방식 매체인데 현재는 Ba-ferrite분말도포매체가 공업적 공정측면에서 산업화에 가깝다. 이는 기존 테이프 메이커들의 설비활용이 가능하고 tribology, 안정성에서 비교적 문제가 적기 때문이다. 그러자 이 재료도 금속분말도포제와 특성이 비슷하고 분말자체 가격도 비슷해서 기존재료와 치열한 경쟁을 이겨야 산업화에 성공할 것으로 생각된다. 이보다 훨씬 고밀도기록이 가능한 소재중에서 Co-Cr수직기록박막이 가장 많이 연구되고 있어서 공업화 가능성이 높지만 head 재료의 개선, tribology 문제해결 등이 선행되어야 공업화가 성공될 것이다. 그러나 선진국 특히 일본, 미국에서 이러한 연구가 엄청나게 많이 진행되고 있어서 빠른 시일내에 산업화가 이루어질 것으로 기대된다.

  • PDF

Topology Optimization of Perpendicular Magnetic Recording System by Considering Magnetic Nonlinearity (재료의 비선형을 고려한 수직기록장치의 위상최적화)

  • Park, Soon-Ok;Yoo, Jeong-Hoon;Min, Seung-Jae
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.34 no.7
    • /
    • pp.821-827
    • /
    • 2010

  • This paper proposes a density method based topology optimization of a perpendicular magnetic recording system design in which the saturation effect is taken into account. During the topology optimization process in magnetic fields, the magnetic reluctivity is updated in accordance with the changes in element density determined by a sensitivity analysis. The magnetic reluctivity is determined from a B-H curve and is used to represent nonlinear material property, i.e., the saturation effect. The sensitivity for a generalized response functional is formulated using the adjoint variable method in which the nonlinear property is taken into account and the objective function is set such that the magnetic energy in the media is maximized. Effects due to the nonlinear property can be observed from a numerical study in which the linear and the nonlinear topology optimization results are compared.

  • https://doi.org/10.3795/KSME-A.2010.34.7.821 인용 PDF KSCI