• Aerospace Industry
• /
• v.33
• /
• pp.48-51
• /
• 1995

지난 4월의 파리 에어쇼에서 헬리콥터와 비행기의 혼혈아 같은 틸트로터기가 매일 회장상공을 시위비행하여 많은 관중들의 주목을 끌었다. 이 낯선 틸트로터기는 단거리 이착륙 또는 수직이착륙기로 개발된 것이며 이미 40년의 역사를 지니고 있다. 그후 이 항공기의 여러가지 장점이 인정되며 V-22라는 제식명으로 미공군과 해군에서 채택해 대량생산을 목전에 두고 이번에는 민간용의 개발 판매를 위하여 XV-15라는 형식명으로 비행 실기를 선보이게 된 것이다. 틸트로터기의 과거, 현재, 미래를 살펴본다.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.358-367
• /
• 2020

With the increases of average commuting time of office workers in the Seoul metropolitan area and the cost of traffic congestion on roads, the need for new transportation is increasing and urban air mobility (UAM) is emerging as an alternative. Therefore, in this paper, the vertiport locations were selected and routes were established using population, traffic and commuting data of Seoul and Gyeonggi Province. Vector thrust type and multicopter type of eVTOL compatible for UAM were selected by analyzing the types of eVTOLand time required for selected routes was calculated. In addition, the time required when we utilize other transportations was compared with UAM. Finally, it was verified that the commuting time can be sharply reduced when we use UAM.

• Current Industrial and Technological Trends in Aerospace
• /
• v.5 no.1
• /
• pp.75-92
• /
• 2007

2002년 프론티어사업의 일환으로서, 10년간 1200억의 예산으로 미래형 신개념비행체 기술개발사업을 시작한 스마트무인기사업은, $2002{\sim}2003$년 수행한 개념연구를 통해 미래형 신개념 고속 수직이착륙 항공기 개념으로서 틸트로터 개념을 선정하고 이의 개발에 매진하고 있다. 사업단에서는 우선, 항공 선진국에서 지난 반세기 동안 시행한 다양한 비행체 개념연구결과에 대해 자체적인 비교 분석 및 국제공동 연구를 근간으로하여, 당시 틸트로터에 필적하는 가능성을 보였던 스탑트로터(보잉사), 복합자이로콥터(카터콥터사) 개념이 아닌, 틸트로터 비행체의 기술개발을 결정하게 되었다. 각각의 비행체 개념이 갖는 위험성과 도전성, 그리고 소요기술, 설계특성, 개발 위험도 등에 대한 면밀한 분석을 기초로 한 사업단의 체계적 의사결정은 주효했다. 스탑트로터개념은 비행시험의 잇단 실패와 지연/잠정 중단사태가 이어졌고, 복합자이로콥터 또한 잇단 비행사고로 2002년 기록한 148kts를 능가하는 고속성능 시현에 지금까지 실패함으로써, 실용화 가능한 고속수직이착륙기로서의 검증을 위해서는 해결해야할 기술적 과제가 많이 남아있음을 보여주고 있다. 반면, 틸트로터 개념의 경우 V-22의 설계 수정형에 대한 성공적인 비행시험완료 및 인증획득으로 전면양산승인이 2005년 결정되어 458대가 (미해병대(360), 해군(48), 공군(50)) 납품될 예정이고, 2010년 인증획득을 목표로 민수용으로 개발중인 BA609의 순조로운 비행시험진행, 무인기로 개발된 Eagle Eye 기술시현기의 비행 시험성공과 2003년 미 해양경찰청으로부터 Deep Water 프로그램의 장거리 순찰임무 주력기종 선정과 같이 군용, 상용, 무인용 고속 수직이착륙 시장의 전 방위적 진입이 현실화되고 있다. 이에 따라 항공업계의 반응은 2가지 방향으로 나뉘고 있다. 하나는 유럽의 ERICA 프로그램과 같이 틸트로터 기술 개발을 서두르자고 주장하는 방향이고, 다른 하나는 시콜스키의 X2 프로그램과 같이 틸트로터와는 차별화된 독자적인 고속 수 직이착륙 비행체 개념 개발을 시도하는 것이다. 이러한 배경으로 국내 독자적인 기술력으로 지난해까지 일구어낸 성공적인 스마트무인기 상세설계 종료 및 축소형 비행체 전환비행성공은 그 의의가 매우 크다고 할 수 있다. 본 논문은 틸트로터 개발사를 통해, 신개념 비행체 개발의 어려움과 교훈을 알아보고, 세계에서 2번째로 틸트로터 기술을 개발하고 있는 스마트무인기 사업의 현황과 기술적 특징 및 의의의 정리, 그리고 틸트로터의 대안으로 진행중인 새로운 고속 VTOL 비행체 연구현황에 대한 소개 와 간단한 기술적 평가를 포함시켰다.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.448-455
• /
• 2022

In this study, when establishing a UTM(UAS Traffic Management) system, a corridor must be set to separate the flight distance between unmanned aerial vehicles, and the size of the corridor was calculated in consideration of TSE(Total System Error). The flight data of the straight section and the turning section were collected using a hybrid vertical take-off and landing unmanned aerial vehicle. The flight data were derived from the TSE using the SQSM(Scalar Quantity Summation Method) method, and the impact on the straight and turning sections was analyzed by calculating in detail by NSE(Navigation System Error) and FTE(Flight Technical Error). The corridor size was calculated by referring to the TSE analysis results and PBN (Performance-based Navigation) manual.

• Journal of Aerospace System Engineering
• /
• v.14 no.1
• /
• pp.68-73
• /
• 2020

This purpose of this paper was to review the development trend of the VTOL MAVs with a ducted propellant that can fly like the VTOL at intermediate and high speeds, hovering, landing, and lifting off vertically over urban areas, warships, bridges, and mountainous terrains. The MAV differs in flight characteristics from helicopters and fixed wings in many respects. In addition to enhancing thrust, the duct protects personnel from accidental contact with the spinning rotor. The purpose of the U.S. Army FCS and DARPA's OAV program is spurring development of a the VTOL ducted MAV. Today's MAVs are equipped with video/infrared cameras to hover-and-stare at enemies hidden behind forests and hills for approximately one hour surveillance and reconnaissance. Class-I is a VTOL ducted MAV developed in size and weight that individual soldiers can store in their backpacks. Class-II is the development of an organic VTOL ducted fan MAV with twice the operating time and a wider range of flight than Class-I. MAVs will need to develop to perch-and-stare technology for lengthy operation on the current hover-and-stare. The near future OAV's concept is to expand its mission capability and efficiency with a joint operation that automatically lifts-off, lands, refuels, and recharges on the vehicle's landing pad while the manned-unmanned ground vehicle is in operation. A ducted MAV needs the development of highly accurate relative position technology using low cost and small GPS for automatic lift-off and landing on the landing pad. There is also a need to develop a common command and control architecture that enables the cooperative operation of organisms between a VTOL ducted MAV and a manned-unmanned ground vehicle.

• Journal of the Korea Convergence Society
• /
• v.8 no.6
• /
• pp.219-226
• /
• 2017

As the UAV industry is getting matured, various types of UAVs have appeared in many application fields, including filming, reconnaissance, rescue, and etc. and it requires the quick hardware designs, particularly a battery pack, of the UAV. We developed the automatic battery pack design tool for the convenient battery pack configuration design of the hoverable type delivery UAV. With inputs, including current profile, voltage profile, various kinds of cell specifications, desired battery pack voltage, and etc. the automatic battery pack design tool calculates a pack having the minimum weight and the maximum capacity by combining either homogeneous cells or heterogeneous cells. Also, the tool could predict the capacity fading trend of the designed battery pack configuration.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.3
• /
• pp.226-233
• /
• 2015

Pose estimation is an important operation for many vision tasks. This paper presents a method of estimating the camera pose, using a known landmark for the purpose of autonomous vertical takeoff and landing(VTOL) unmanned aerial vehicle(UAV) landing. The proposed method uses a distinctive methodology to solve the pose estimation problem. We propose to combine extrinsic parameters from known and unknown 3-D(three-dimensional) feature points, and inertial estimation of camera 6-DOF(Degree Of Freedom) into one linear inhomogeneous equation. This allows us to use singular value decomposition(SVD) to neatly solve the given optimization problem. We present experimental results that demonstrate the ability of the proposed method to estimate camera 6DOF with the ease of implementation.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.spc3
• /
• pp.262-268
• /
• 2012

In the recent research technical solutions have been studied to integrate renewable energy into unmanned aerial vehicles to use it as the main power source. As the weight of the aerial vehicle body is essential for its performance, we consider to use light-weight solar cell technology. Furthermore fuel cells are also integrated create a highly energy-efficient aerial robot. In this paper, construction concept and software design of the tilt-rotor aerial vehicle GAORI is introduced which uses solar cells and fuel cells as power source. The future work direction and prognosis are discussed.

• Journal of Institute of Convergence Technology
• /
• v.5 no.2
• /
• pp.1-6
• /
• 2015

Flying Saucer(flying disk type UFO) is a rotating disk that flies through the air. Thus, the aerodynamical features of the Flying Saucer can be estimated by taking a close look on the aerodynamics of the rotating disk. In the present paper, the aerodynamics of the rotating disk are reviewed focusing on the their application to the possibility of the UFO type VTOL aircraft. Finally, a combination of Avro Aircraft and Frisbee concepts is suggested as a possible new UFO type VTOL aircraft.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.12
• /
• pp.819-828
• /
• 2022

Sensitivity of aircraft sizing depending on battery performance was studied for a generic quad tilt rotor type electric vertical takeoff and landing vehicle. The mission requirements proposed by Uber Elevate and NASA were used for initial sizing, and the calculated gross weight is ranged between 5,000lb and 11,000lb for battery specific energy range of 200-400Wh/kg in pack level and continuous discharge rate range of 4-5C. For the assumed gross weight of 7,000lb, the required battery performance was calculated with two different criteria: available power and energy, and the effects of battery specific energy and discharge rate are analyzed. The maximum discharge rate is also recommended considering failure cases such as one battery pack inoperative and one prop rotor inoperative.