• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.573-578
• /
• 2002

양파박피기 개발을 목적으로 수행된 본 연구에서는 공정상 필요한 뿌리절단장치에 관하여 시험 분석하였다. 뿌리를 절단, 제거하는 데 적합한 칼날의 종류, 회전속도와 이송속도, 및 소요동력 등 제 특성을 구명하여 적절한 회전칼날을 제작 사용함으로써 능률 높은 양파박피기를 개발하고자 수행한 결과를 요약하면 다음과 같다. 1. 양날형, 축날형, 원추형, 및 원통형 등 직경 30 mm의 칼날을 제작하여 실험하였던 바, 양파의 뿌리절단에는 구부린 칼날로 파내기를 하고 수직칼날로 금긋기를 동시에 할 수 있는 양날형이 가장 좋은 것으로 나타났다. 2. 양파의 뿌리부가 100% 절단이 되고 소요동력이 낮으면서 절단시간을 단축할 수 있는 최적의 작동조건은 칼날의 무부하 회전수 630 rpm, 이송속도 0.08 m/s인 것으로 나타났고, 그때의 최대토크는 5.25 kg·cm이었으며 최대소요동력은 33W로 나타났다.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.221-229
• /
• 2022

This study was aimed to investigate spatial and vertical characteristics of greenhouse environments according to the location of the environmental sensors, and to investigate the correlations between temperature, light intensity, and carbon dioxide (CO₂) concentration according to the type of greenhouse. Temperature, relative humidity (RH), CO₂, and light sensors were installed in the four-different vertical positions of the whole canopy as well as ground and roof space at the five spatial locations of the Venlo greenhouse. Also, correlations between temperature, light intensity, and CO₂ concentration in Venlo and semi-closed greenhouses were analyzed using the Curve Expert Professional program. The deviations among the spatial locations were larger in the CO₂ concentration than other environmental factors in the Venlo greenhouse. The average CO₂ concentration ranged from 465 to 761 µmol·mol^-1 with the highest value (646 µmol·mol^-1) at the Middle End (4ME) close to the main pipe (50Ø) of the liquefied CO₂ gas supply and lowest (436 µmol·mol^-1) at the Left Middle (5LM). The deviation among the vertical positions was greater in temperature and relative humidity than other environments. The time zone with the largest deviation in average temperature was 2 p.m. with the highest temperature (26.51℃) at the Upper Air (UA) and the lowest temperature (25.62℃) at the Lower Canopy (LC). The time zone with the largest deviation in average RH was 1 p.m. with the highest RH (76.90%) at the LC and the lowest RH (71.74%) at the UA. The highest average CO₂ concentration at each hour was Roof Air (RF) and Ground (GD). The coefficient of correlations between temperature, light intensity, and CO₂ concentration were 0.07 for semi-closed greenhouse and 0.66 for Venlo greenhouse. All the results indicate that while the CO₂ concentration in the greenhouse needs to be analyzed in the spatial locations, temperature and humidity needs to be analyzed in the vertical positions of canopy. The target CO₂ fertilization concentration for the semi-closed greenhouse with low ventilation rate should be different from that of general greenhouses.

• Journal of the Economic Geographical Society of Korea
• /
• v.19 no.4
• /
• pp.712-728
• /
• 2016

This study examines the foundations of contract farming, the extent of corporate vertical coordination, and farmer's land use in regards to the contract farming between discount store and watermelon farmers in Buyeo-gun, Chungcheongnam-do. In the above case, contract farming is led by the group of producers. As the corporate's role is limited due to the specification of watermelon breed, contract farming takes the form of procurement contract with restrained levels of corporate vertical coordination. Thus, it has become common for contract farmers to freely enter and leave contracts and sign contracts with multiple clients. Furthermore, farmers participate in contract farming by using contract breeds in existing crop rotation systems. Through this process, watermelon farming is undergoing a process of diversification via the spread of contract varieties in this region.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.3
• /
• pp.69-76
• /
• 2024

This dissertation developed a five-story vertical livestock and fisheries farm (palm tower) model for sustainable food production in cities. It proposes to integrate marine farms, livestock raising, and pesticide-free automated crop farms to efficiently use resources and minimize environmental impact. Based on circular economy principles, the model can recycle the output of each part into resources from the other, increasing the efficiency of the system, utilizing idle space in the city, and promoting job creation and community participation. It can also contribute to reducing the carbon footprint of food production and improving food safety. In addition, the study explores how advanced agricultural technologies can be integrated into urban structures to address global food security challenges. This model presents potential solutions to the food crisis caused by climate change and population growth, and suggests a direction for the development of urban agriculture. Future research should address the technical and policy challenges for practical implementation.

• Korean Journal of Agricultural Science
• /
• v.10 no.2
• /
• pp.277-291
• /
• 1983

In order to investigate the shear characteristics of earth structure after construction. Four sample soils with different gradation were selected and compacted under the optimum moisture content and the maximum dry density. And the direct shear test and the triaxial compression test were performed with those sample soils under various pre-compression loads. The results were summarized as follows; 1. With the increase of the percent passing of No. 200 sieve, the cohesion of soil increased regularly and the internal friction angle of soil decreased with slow ratio. 2. The pre-compression increased the shear strength of compacted cohesive soil. The increase of cohesion was very apparent but the internal friction angle didn't show such regular tendency. 3. With the increase of pre-compression load, the slope of stress-strain curve showed steep at the early stage of horizontal strain. The vertical strain was small at the compression stage and big at the expansion stage. 4. When the vertical stress of shear test with increase in the horizontal strain was small, stress ratio(shear stress vs. vertical stress) of sample showed the largest value and the slope of stress ratio curve showed also steep. 5. When the sample was had the same condition, the cohesion of soil showed bigger value in the triaxial compression test and the internal friction angle of soil showed bigger value in the direct shear test.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.11 no.2
• /
• pp.261-265
• /
• 2006

가. 젖소분을 이용하여 관행사육과 상자사육방식을 비교한 결과 단위면적당 3,000g(15${\times}$15${\times}$30,cm)으로 관행방식과 차이가 없었다. 나. 지렁이의 수직분포는 15cm이상에 대부분 분포하고 있었으나 관행방식은 0 ${\sim}$ 10cm에서 고르게 분포되어 있었으나 상자사육에서는 0 ${\sim}$ 5cm에 70%이상이 분포되어 기계화 채취에 적합한 것으로 판단되었다. 다. 분변토 분리 및 배출시험을 위하여 로드셀을 켈리브레이션 하였으며 이때 출력전압(v)과 중량과의 회귀관계는 Y = 0.004X + 1.0995로 나타났다. 라. 분변토 분리 및 배출 시험을 한 결과 축분처리상자를 개량전에는 분리 및 배출장치의 압축력이 평균 1.2kg/cm$^{2}$, 1.4kg/cm$^{2}$로 나타났으며 축분처리상자의 배출구를 1cm 높이고 폭을 10cm 줄여 개량후 배출장치의 압축력이 평균 0.6kg/cm$^{2}$, 0.5kg/cm$^{2}$로 압축력을 50%, 64%절감 시킬 수 있었다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.347-352
• /
• 2003

농산물 포장화물의 경우 농산물의 손상은 겉포장 상자의 파손에 의한 압상이 주요 원인이다. 따라서 농산물 상자의 경우 압축강도를 특히 중요시 여기고 있으며, 한국산업규격을 비롯해 각종 농산물 관련 규정에서는 압축강도에 의한 상자의 품질관리를 규정화 하고 있다. 골판지 상자의 압축강도는 원단인 골판지의 구성 원지들(라이너, 골심지)의 품질과 이들의 구성 형태 및 상자의 외형 치수 비율에 따라 결정되므로, 원지의 링크라쉬(ring crush), 원단의 수직압축강도(edgewise compression strength)를 통해 상자의 압출강도를 관리하는 것이 보통이다. 또한 골판지 상자는 제작 후 유통 과정을 거치면서, 여러 요인에 의해 압축강도가 현격하게 저하되는데, 이중 수분 흡습에 의한 강도저하와 장기 누적하중, 진동 및 충격 등의 피로로 인한 강도 저하가 가장 크다. 여러 산업 분야에서 골판지 상자의 견고성 문제는 물품의 내수 및 수출시 제품에 대한 신뢰성 확보와 기업의 이미지 제고와 직결되는 중요한 사항이다. 특히, 세계 각 국의 농산물 시장이 개방됨에 따라 우리나라 농산물의 수출도 확대될 전망이고 또한 마땅한 대체재가 개발되지 않는 한 골판지 상자의 이용은 날로 증가될 것으로 전망된다. 따라서 골판지 상자의 압축강도와 내구성 향상에 대한 다각적인 연구가 절실하다. (중략)

• Journal of the Economic Geographical Society of Korea
• /
• v.25 no.1
• /
• pp.109-130
• /
• 2022

The Vietnamese government has proposed contract farming through a new type of cooperative as an institutional innovation which aims to restructure the agricultural sector. However, policy changes often impact farmers, who bear the primary effects of the transition process. Understanding households' strategies for land use and livelihood is crucial for policymaking in the agricultural development field. This study was conducted in the rural Binh Dao commune in Central Vietnam. We analyzed household members' labor force changes and their livelihood behaviors after their participation in a contract farming scheme using qualitative analysis methods combined with geographic information system (GIS) support, based on secondary data and in-depth interviews of 190 farmers. Simultaneously, we created a digital map of the cooperative's production area to investigate changes in land use and production activities. The findings show that contract farming shaped the vertical coordination of the value chain from the farmers to the cooperative and agricultural product trading companies. Subsequently, it encouraged land use and labor efficiency due to mechanical support. In addition, it also increased productivity and protected farmers from market risks. However, despite its positive effects on agricultural productivity in this case, the contract farming scheme could not achieve the restructuring of the rural labor force toward non-agricultural sectors. Ironically, farmers in the Binh Dao commune tended to increase cultivable land during the agricultural restructuring program, rather than switching their labor forces to non-agricultural sectors. The lack of stable non-farming job opportunities in rural Vietnam results in challenges to the efficiency of agricultural restructuring programs. Consequently, farmers in the Binh Dao commune are still smallholder farmers, depending on the family labor force.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.1
• /
• pp.41-52
• /
• 2009

새로 개발된 모형에 대한 민감도 분석은 입력변수의 선정 및 보정을 위한 필요한 지침을 제공하기 위해 수행되어야 할 필수적인 과정이다. 동적 농업비점오염 평가모델 (dynamic agricultural nonpoint source assessment tool, DANSAT)은 농업 최적관리기법(BMP)의 지표 및 지하수에 대한 영향을 평가하기 위해 개발된 3차원 모델이다. 본 연구의 목적은 서로 다른 토층 및 유역내 위치에서 입력변수의 변화에 따른 지표 및 지하관련 출력들의 반응을 토대로 DANSAT의 일반적인 민감도 분석을 수행하는 것이다. 선정된 입력변수들의 변화에 따른 세가지의 지표관련 출력 (유출량, 유사량, 유출수중 농약 부하량) 및 두가지의 지하관련 출력 (지하수로의 유입 유량 및 지하수로의 농약 유입량)의 반응이 고려되었다. 민감한 입력변수들은 하나의 격자만을 이용한 예비 민감도 분석을 통하여 선정되었는데, 대체로 토양 관련 인자들이 지표 및 지하에서 양적/질적으로 민감하게 작용하는 것으로 나타났다. 예비민감도 분석을 통해 선정된 토양입력변수들의 서로 다른 토층에서의 변화에 따른 모형 출력들의 반응을 고려한 수직적 민감도 분석결과, 지표관련 출력들의 경우 지표 부근의 상층 토양의 인자가, 지하관련 출력들의 경우 하부 토층의 인자가 각각 민감하게 작용하는 것으로 평가되었다. 유역내에서 입력변수들의 공간적 위치의 변화에 따른 반응을 고려하는 수평적 민감도 분석결과, 유역 경계의 주변보다 하천 주변에서의 입력변수 변화가 모형의 지표 및 지하관련 출력들에 민감한 것으로 나타났다. 본 연구 결과는 BMP의 지표 및 지하의 수문/수질에 미치는 영향을 평가하기 위해 개발된 DANSAT 모형의 입력변수 선정 및 보정에 유용한 자료로 활용될 것으로 기대된다.

• Korean Journal of Agricultural Science
• /
• v.23 no.2
• /
• pp.227-232
• /
• 1996

It is a tedious job to handle seedling trays in a green house with human hands because of their fluctuation when they are moving. A robotic gripper for handling a seedling tray has been developed., which has two fingers consisting of the vertical and horizontal bars. The maximum deflections at the center of the seedling trays were measured with various lengths of the horizontal bars. The length of 250 mm was revealed to be optimal one, resulting less than 15 mm deflection with a $540{\times}270mm$ seedling tray, which was acceptable for a practical use. For this study a LM system was adopted to move the fingers. To validate this system the robotic gripper was installed on a Cartesian robotic manipulator and their performance was tested several times with great success. The robotic manipulator used in this study was a general one, so a special one for this robotic gripper needs to be developed in future.