• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.3
• /
• pp.245-254
• /
• 2005

Radioactive material is used in the various fields. The numbers of transport for radioactive material have been gradually increased in both domestic and International regions. The safety of the cask should be secured to safely transport of radioactive material. The korean atomic law and the IAEA safety standards prescribe regulations lot the safe transport of radioactive material The cask for spent fuel is comprised of the body and the impact limiter. In this study, the empirical equation of the cask impact force is proposed based on the dimensional analysis. Using this empirical equation the characteristics of the impact limiter are analyzed. The results are also validated by comparing with the previous results of the impact area method and the finite element analysis. The present method can be used to predict the impact force of the cask.

• Corrugated packaging logistics
• /
• v.8 no.39
• /
• pp.102-106
• /
• 2001

• Proceedings of the KSEE Conference
• /
• 2007.03a
• /
• pp.107-115
• /
• 2007

• Journal of the Korean Society of Safety
• /
• v.6 no.2
• /
• pp.37-40
• /
• 1991

산업용 안전모는 그 기능상 耐貫通性과 衝擊吸收性이 중요하다. 이중내관통성은 별로 어려움이 없으나 충격흡수성은 무게 및 크기가 제한되고 극히 간단한 안전모의 구조에 충격을 충분히 흡수하는 Bumper작용까지 하여야 하므로 기준에 합격할수 있는 안전모를 제작하기 위하여는 여간 어려운게 아니다. 이에 論者는 일정한 무게의 추가 일정한 높이에서 자유낙하하여 안전모에 충격을 加하고서 반발할때까지의 안전모의 수직운동(변형)이 어느정도 이루어저야 하는지에 대하여 관심을 갖었다. 즉 모체든 착장체든 또는 모체와 착장체의 연결장소에서든 일정한 충격량을 받았을때 모체의정점(낙하물과 최초로 접한부분)이 수직으로 S'의 거리 만큼 움직여 주고 운동이 정지된다고 보았을때 S'과 m(추의중량), S(추가 떨어지는 높이) Fi(충격이 흡수되고 남은 충격력)와의 관계식을 뉴톤의 운동법칙으로 부터 수학적 방법으로 유도 함으로서 시험조건 및 검정 기준에 주어진 수치인 m, S, Fi,을 대입하므로서 S'을 알 수 있는바 이것을 기초로 안전모의설계및 제조된 안전모의 충격흡수 정도를 용이하게 판단 할 수있다.

• Geotechnical Engineering
• /
• v.30 no.12
• /
• pp.8-19
• /
• 2014

• Fire Science and Engineering
• /
• v.32 no.6
• /
• pp.69-73
• /
• 2018

This study examined the reduction effect of a hydrodynamic force acting on the vertical wall of a portable water storage tank with a convex bottom floor. For the numerical simulation, the linearized Peregrine's equation was used to analyze the lapping waves in the tank caused by water falling from a supplying nozzle. The hydrodynamic force could be calculated by measuring the maximum run-up wave height at the vertical wall. The initial conditions of the numerical experiments were set up by controlling the positions and heights of the water supplying nozzle. Finally, the hydrodynamic force acting on the vertical wall can be reduced by the convex bottom design of the portable water storage tank so it can be applied to improve the structural stability.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.197-198
• /
• 2017

인공재해와 자연재해로 인해 발생하는 비정상 하중에 의해 국부손상이 발생된 철골 교량 구조물은 추가적인 2차 붕괴의 위험요소들을 내재하고 있어 신속한 전면 해체가 요구된다. 본 시공 사례는 건설실패와 태풍 및 지진으로 국부손상이 발생된 철골 트러스 구조의 교량의 긴급해체를 위해 발파해체 공법을 적용한 사례이다. 철골 부재의 절단을 위해 성형폭약이 필요하지만 현지에서 수급이 불가능한 상태이기 때문에 장약용기를 직접 제작하고 에멀젼 폭약을 충전하여 만든 성형폭약을 이용하여 발파해체에 적용하였다. 직접 제작한 성형폭약을 이용하여 발파해체한 결과 철골 부재가 정확히 절단되면서 교량의 중앙부가 수직자유낙하하고, 교량의 양 끝단은 지지부를 중심으로 회전낙하 하였다. 또한 존치 구조물 및 주변에 피해가 발생하지 않았으며, 발파 후 파쇄 상태는 매우 양호하였다. 이로 인해 직접 제작한 성형폭약의 절단 성능을 확인할 수 있었으며, 신속하고 안전하게 국부손상이 발생된 구조물을 해체하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.479-488
• /
• 2018

The issue of waste and its recycling is perceived as a worldwide environmental problem, and the plastic waste is perceived as the biggest social problem threatening the lives of mankind. The vertical protective net, manufactured by using the plastic resin is vertically installed on the outside in case of formwork at the construction site, in order to prevent the fallen objects and scattered dusts. The objective of this study is to understand the actual use status of vertical protective net in the construction site, to examine the changes in the environment-related regulations recently strengthened in the construction site, and also to improve the field technicians' perception of it. And based on it, this study aims to suggest the measures for using the rational and environment-friendly materials and also for promoting the recycling of vertical protective net as the vertical protective nets made of plastic resin are thoughtlessly used in the construction site.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.12
• /
• pp.17-21
• /
• 2020

Over 60% of South Korea's land consists of mountainous topography, and recently, due to earthquakes, localized heavy rains and road development, the risks of rockfalls are getting higher. As of now, rockfall prevention facilities are being constructed in 70% of Korean roads cut slope and rockfall protections account for about 20% of them. Rockfall protection's supporting capacity is defined by combining performance of wire mesh, pillars and wire ropes. For the existing constructed rockfall protection, standards of pillars that can absorb 48~61 kJ amount of energy, wire ropes and wire mesh are presented in Guidelines for the installation and management of traffic safety facilities, Rockfall prevention facilities by Ministry of Land, Transport and Maritime Affairs (2008). However, each factor's correlation of absorption energy is not presented so it is uncertain. This study will conduct vertical drop test and identify adequacy of rockfall protection net of displacement quantity calculation factor which is delta and evaluate rockfall protection net's absorbable energy through standards of overseas performance evaluation criteria.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.49-60
• /
• 2009

In order to develop a new rockfall protection fence using high carbon steel wire rod (HSWR) material instead of the conventional wire rope material, the author has conducted the laboratory strength tests of both materials and their connections, and carried out evaluation of absorbing rockfall energy through the vertical field rockfall tests. The vertical filed rockfall tests showed that the new rockfall protection fence with 12 rows of the HSWR could absorb more rockfall energy than 50 kJ which stands for the typical design criteria. In addition, when the quantity of HSWR was increased up to the 16 rows, the capacity of absorbing energy was greatly improved. The new rockfall protection fence was successfully applied to the highway rock-cut slope. As a result of the filed application, its constructability was similar to the conventional fence, but its total image was improved as simple and clean. The total construction cost was saved up to 20% in comparison with the conventional one.