• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.4 s.74
• /
• pp.375-387
• /
• 2006

Different from the previous studies which investigated seismic P-$\Delta$ effect in slender columns though comparison of response spectra according to stability coefficients obtained from the analyses based on the assumed moment-curvature relationship, the axial force and P-$\Delta$ effect in RC columns are investigated on the basis of the layered section method which can effectively consider the changes of stiffness and yield strength due to the application of axial force in RC members. Practical ranges of slenderness and stability coefficient are assumed, and sixty sets of horizontal/vertical earthquake inputs are used in the analysis. From the parametric study, it is noted that the maximum deformation of the slender RC column is hardly affected by P-$\Delta$ effect or vortical earthquake but dominantly affected by the applied axial force. Therefore, it can be concluded that no additional consideration for the P-$\Delta$ effect and vortical earthquake is required in the seismic design of a slender RC column if the axial force effect is taken into account in the analysis and design procedures.

• Review of Culture and Economy
• /
• v.21 no.1
• /
• pp.3-20
• /
• 2018

This study investigates a comprehensive context between the vertical integration and concentration of Korean film market. The concentration of distribution and screening markets are result of industrial strategy to defend demand uncertainty and to pursue economies of scale. Major distributors are increasingly inclined to defend industrial risk by concentrating resources on blockbusters and bargaining power of the multiplex is getting strengthened by distribution competition to secure as many screens as possible. Vertically integrated multiplexes operate discriminatory preferential treatment to their affiliates, however, there is a difference in degree of discrimination between vertically integrated groups. Furthermore, it is difficult to exclude each other from the distribution competition in which the largest screen number has to be secured. It is difficult for multiplex only to pursue the interests of affiliates and make negative choices in screening performance. As the number of screening screens increases, the seat occupancy also increases. As a result, the polarization of the distribution and screening markets, including the screen monopoly, is a phenomenon that occurs commercial films centered markets and the unfair behavior of the vertically affiliated multiplex has a limited effect on the movie market.

• 대한치과보철학회:학술대회논문집
• /
• 1998.05a
• /
• pp.52-52
• /
• 1998

• The Journal of the Korean dental association
• /
• v.33 no.11 s.318
• /
• pp.776-784
• /
• 1995

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.2
• /
• pp.229-235
• /
• 2015

Purpose: This study was undertaken to study on visual function before and after prescription of vertical prism. Methods: 80 subjects (10-30ages) who had been precribed vertical prism and 1 year after they were represcribed vertical prism. Results: Phoria (p=0.000), supra vergence (p=0.000), NPC (p=0.003), NPA (right eye) (p=0.005), NPA(left eye) (p=0.000) showed a significant change. Conclusion: Vertical prism prescription was reduced during revisit. Supra vergence, NPC, NPA(right eye), NPA(left eye) showed a significant change. Binocular Accommodative lag was not associated with vertical prism prescription and binocular vision findings.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.175-183
• /
• 2000

The purpose of this study was to identify the compensatory adaptation of dentoalveolar structure according to the various skeletal relation through the statistical correlation between the anteroposterior, vertical skeletal and dentoalveolar relation. For this study, the sample were consisted of 101 adult subjects (51male and 50 female, mean age; male 23.6 years, female 21.5 years) who had good occlusion with the range of normal overjet and overbite and acceptable Angle's class I molar relationship which had not been related orthodontically The results were as follows : 1. Even though acceptable normal occlusion, the range of measurements which represent anteroposterior, vertical skeletal relation and dentoalveolar relation were very wide. 2. Upper and lower incisor axis were significantly correlated with anteroposterior skeletal relation, which means the mote lingual inclination of upper anterior teeth and the more labial inclination of lower anterior teeth according to the more anterior position of mandible to the maxilla (P<0.01). 3. Upper and 1ower anterior alveolar bone height was statistically correlated with the lower anterior vertical skeletal height. 4. Upper and 1ower alveolar bone height were not correlated with anteroposterior skeletal relation (P>0.05). 5. The correlation between the incisor axis and vertical skeletal was more closely related in upper anterior teeth than the lower anterior teeth. To summarize the above results, even though acceptable normal occlusion, skeletal and dentoalveolar relation was very widely ranged, and there were close relationship between the anteroposterior skeletal relation and the inclination of upper and lower anterior teeth and between the vertical skeletal relation and upper and lower anterior alveolar bone height. These finding can be concluded as compensatory adaptation to the different skeletal relationship.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.763-774
• /
• 1998

The purpose of this study was to evaluate the morphology of mandibular symphysis and location of lower incisor under the influence of the craniofacial skeleton in skeletal Class III malocclusion. The sample consisted of 132 adults who have severe Class III malocclusion(prognathism group, 33 males and 33 females), and who have normal occlusion(normal group, 33 males and 33 females). They had not received any orthodontic treatment or orthognathic surgery. The lateral cephalograms were evaluated. The results were as follows : 1. Prognathism group were larger than normal group in comparison of facial skeleton (p<0.05) with the exception of ${\angle}FH-Pal$, ${\angle}SNA$. 2. In the morphology of symphysis, measurements of anteroposterior width(LaABBW, LiABBW, SW) of prognathism group were significantly less than that of normal group(p<0.001). 3. In the correlative analysis between the craniofacial skeleton and symphysis measurements of prognathism group, vertical measurements in relation with cranial base and mandibular plane showed reverse correlationship with anteroposterior width of symphysis(LiACBW, LaACBW, LiABBW, SW)(p<0.05). But, there was not distinct difference between horizontal skeletal measurements and symphysis measurements(p>0.05). 4. The probability by regression test between vertical measurements(${\angle}SN-Mn,\;{\angle}FMA,\;{\angle}Pal-Mn,\;{\angle}LFH$) and symphysis measurements(LiACBW, LiABBW, SW, ${\angle}LISA$) were very high(p<0.001).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.185-194
• /
• 2001

This study was designed to evaluate the effects of angulation changes of head posture on the enlargement ratios of a lateral headfilm depending on the vortical or horizontal rotation of the objects. A device was constructed to measure regional changes of enlargement ratios. The device was held within the cephalostat and cephalograms recorded at each measured degrees of the device tilting, vertically and horizontally. The enlargement ratios of the horizontal, vertical, and angular measurements on the films taken at each tilted angulations were obtained and compared with those on the films taken without rotation. In summary, the enlargement ratios of the horizontal linear measurements were decreased during horizontal rotations. The enlargement ratios of vortical measurements of the right side on the film were increased and those of the left side were decreased by the horizontal rotations. Enlargement ratios of horizontal measurements were affected further than those of vertical measurements by the same angular changes of the horizontal rotations. Therefore, a disruption of parallelism between the object's midsagittal plane and the film could result in distortion of the image while vertical rotation around the object's porionic axis would not significantly affect the enlargement ratios on the headfilm.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.12-16
• /
• 2004

We show that the extinction ratio is improved using slight asymmetry in two core refractive indices of polarization independent very short vertical directional couplers with the double-sided deep-ridge (DSDR) waveguide structure. The optimum asymmetry with the maximum extinction ratio and the tolerance of the refractive index of core with the extinction ratio larger 1ha]1 30 ㏈ increase as the thickness of inner cladding layer and the two cores decrease due to the increase of the coupling strength between the two cores. Also, the device length and the tolerance of the device length with the extinction ratio larger than 30 ㏈ decrease as the thickness of the inner cladding layer and the two cores decrease due to the increase of the coupling strength between the two cores. We show that polarization independent vertical directional couplers with the DSDR waveguide structure with the device length less than 100 ${\mu}{\textrm}{m}$ and the extinction ratio larger than 30 ㏈ could be implemented.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.109-110
• /
• 2016

본 논문에서는 현재 운행되고 있는 선형 유도전동기의 슬립주파수 고정 방식이 아닌 선형 유도전동기를 이용한 자기부상열차의 슬립주파수와 수직력 및 추진력과의 관계를 이용, 열차의 가감속시 운행패턴에 따라 운행 중 슬립주파수가 가변할 수 있는 슬립주파수 가변패턴을 형성, 선형유도전동기 자기부상시스템에서의 에너지 효율향상 가능성을 검증하였다. 슬립주파수와 수직력, 추진력과의 관계를 이용 슬립주파수 일정 실효치전류제어 알고리즘과 슬립주파수 일정 벡터제어 알고리즘을 사용하여 운전조건과 슬립주파수를 변경하며 운전조건에 따른 가장 효율적인 슬립주파수의 패턴을 형성하였다. 이 후 모의시험과 실차를 이용한 실험을 통해 알고리즘에 대한 정당성과 실제 효율의 증가를 통해 타당성을 검증하였다. 앞선 두 가지 알고리즘을 통해 열차부상에 영향을 미치지 않는 범위의 수직력을 가지는 범위내에서 슬립주파수를 가변 운전 조건에 따른 최적의 슬립주파수에 대한 정보를 기반으로 운행 중 가변하는 슬립주파수를 자동열차운전(ATO)시스템에 적용 모의실험을 통해 그 적용가능성과 효율을 검증하였다.