• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.109-122
• /
• 2003

In order to release the pressure fluctuations and micro-pressure wave induced by the entering of train into the small cross sectional tunnel, it has been reported that the construction of air shaft has more advantages with respect to economy and constructability than the enlargement of cross section of existing tunnel. The field monitorings and analytical studies were conducted simultaneously in this study to analyze the mechanical behavior of existing railway tunnel, new cross tunnel and new shaft by the construction of new shaft nearby. The results showed that the minimum distance from existing tunnel to new shaft which secures the stability of existing tunnel was found to be half diameter of existing tunnel. On the three dimensional mechanical behavior of existing tunnel by the construction of new shaft, the results from the analytical study and field monitoring had a similar trend. The analytical study and field monitoring results, however, produced somewhat different results on the mechanical behavior of new shaft itself. These conclusions induce that the analytical method which has been applied on the analyses of horizontal tunnel could not be applied in the same way on the analysis of vertical shaft.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.9
• /
• pp.17-27
• /
• 2015

We perform a series of experimental tests to evaluate whether the shear strength of clean sands can be reliably predicted from shear wave velocity. Isotropic drained triaxial tests on clean sands reconstituted at different relative densities are performed to measure the shear strength and bender elements are used to measure the shear wave velocity. Laboratory tests reveal that a correlation between shear wave velocity, void ratio, and confining pressure can be made. The correlation can be used to determine the void ratio from measured shear wave velocity, from which the shear strength is predicted. We also show that a unique relationship exists between maximum shear modulus and effective axial stress at failure. The accuracy of the equation can be enhanced by including the normalized confining pressure in the equation. Comparisons between measured and predicted effective friction angle demonstrate that the proposed equation can accurately predict the internal friction angle of granular soils, accounting for the effect of the relative density, from shear wave velocity.

• Explosives and Blasting
• /
• v.21 no.4
• /
• pp.23-35
• /
• 2003

This study is to clarify the comparative relationship and a mechanical anisotropy of rock on the subject of granite distributed in the Namwon area Uniaxial compressive and Brazilian strengths with respect to the horizontal and vertical axes of granite are shown the linear relation. In the case of the result of the p-wave velocity measurement. it is represented that the velocity of vortical direction is faster about 10 to 15% than other two horizontal directions. The difference between velocities is caused by a developmental pattern of microcracks distributed in rock. Moreover, this result is very consistent with the result investigated through thin sections. The proportion of uniaxial compression strength to Index of point load strength ($Is_{(50)}$) is 18~20 times in case of granite. Uniaxial compressive strength is relatively good relationship with point load strength, Schmidt hammer rebound value, and tensile strength point load strength of them is the best comparative relationship. It is indicated that point load test is the most useful tool to estimate uniaxial compressive strength, comparing with other experimental methods.

• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.93-98
• /
• 2001

CFT column has excellent structural properties due to the composite action between concrete and steel tube. The bond behavior between the constituent elements has to be found for analyzing the behavior of CFT column. A new model is necessary because most of existing models for bond stress-slip relationship of the deformed bar cannot be applied to the CFT column. Therefore, the objective of this research is to develop a new model related to the bond behavior of CFT column considering the relation between bond stress and vertical stress, and the distribution of lateral stress under the confinement created by steel casing. From equilibrium condition, the formula for relationship between bond stress and vertical stress is derived, and the relationship for the lateral stresses of the CFT column section is obtained by an Airy stress function. The experiments are performed for five CFT column specimens axially loading on concrete alone. The relation between bond strength and lateral stress is investigated from the regression analysis using the measured strains. Finally a new bond strength model is proposed, which is able to predict the relationship for the stress of each direction of CFT column loading on concrete.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10a
• /
• pp.219-221
• /
• 2000

본 논문은 객체 관계형 실시간 DBMS인 Tachyon이 제공하는 데이터 타입과 객체지향 질의의 설계 및 구현을 기술한다. Tachyon은 고성능 데이터 처리를 지원하는 객체 관계형 메모리상주 데이터베이스 시스템(Main-memory resident ORDBMS)로 Tachyon의 데이터 타입과 SQL은 ANSI SQL 3 draft를 기반으로 설계되었으며, 객체 관계형 질의 처리를 위한 OID 데이터 타입을 추가하였다. Tachyon은 클래스 간의 수직적 관계(상속)와 수평적 관계를 정의하고 조작할 수 있는 객체지향 질의를 통하여 융통성있는 데이터 조작이 가능하며, OID를 기반으로 경로식(path expression)을 이용한 향해 질의(navigational query)를 통하여 죠인(join) 비용을 절감하고, index를 통한 인스턴스 접근 등을 통하여 효율적인 데이터베이스 접근을 시도할 수 있다.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.309-310
• /
• 2001

음파산란층은 전세계 해양에 존재하는 현상으로 동물플랑크톤 또는 소형유영동물의 수직이동과 밀접한 관계가 있다 (Sameoto, 1982: Chou et al.,1999). 이러한 음파산란층의 음파산란강도는 동물플랑크톤의 밀도 및 생물량에 비례하므로 동물플랑크톤을 포함하는 해양생물의 분포 및 생물량 평가를 위한 유용한 기법으로 고려되어 왔다(Smith et al.,1989; lida et al.,1996). 국내에서도 대한해협을 중심으로 음파산란신호를 이용한 동물플랑크톤의 분포를 추정한 바 있다 (Na and Park, 1989). (중략)

• Journal of the KSME
• /
• v.27 no.6
• /
• pp.504-514
• /
• 1987

복잡한 전자부품의 조립시에 필요한 열적 디자인에 관한 정보는 오래전부터 실험을 통하여 얻어지고 있다. 실험적 데이터를 이용하여 무차원 파라미터로 표시된 실험결과는 꼭 같지는 않지만 현상적으로는 비슷한 상황에 응용될 수 있다. 여기서는 학술문헌에 나타나 있는 자연대류에 관한 실험적인 상관관계식들과 프레임에 수직으로 꽂혀있는 균일가열 전자회로기판의 모델에서 얻어진 무차원 자료들을 비교하고자 한다. 대부분의 자료들은 수정채널 Rayleigh수(Ra")가 15~100범위에 속하며, 이러한 범위는 부품이 조밀하게 배치된 기관이 서로 좁은 채널을 이루고 있으며, 동시에 상당한 전력을 소비하고 있는 경우에 해당한다. Wirt와 Stutzman, Bar-Cohen과 Rohsenow의 일반상관관계식은 AT'||'&'||'T Bell 연구소에서 개발된 전자기기를 이용하여 수집한 실험데이터를 잘 표현하고 있으며 10 < Ra" <1,000범위에서 추천될 수 있다. 두개의 유사한 상관관계식과 비교할 때 상당히 좋은 예측을 보였으며 또한 Sparrow와 Gregg의 연구결과와도 잘 일치하므로 Ra" < 10인 경우에 Aung의 완전발달층류의 채널유동방식, Ra" > 1,000인 경우에는 Aung등의 단일 수직평판 근사식이 추천될 수 있다. Coyne의 알고리즘에 의한 계산치는 10

• Journal of KIISE:Databases
• /
• v.34 no.1
• /
• pp.18-34
• /
• 2007

In order to provide various business analysis methods, OLAP(On-Line Analytical Processing) systems represent their data with multidimensional structures. These multidimensional data are often delivered to users in the horizontal format of tables whose columns are corresponding to values of dimension attributes. Since the horizontal tables nay have a large number of columns, they cannot be stored directly in relational database systems. Furthermore, the tables are likely to have many null values (i.e., sparse tables). In order to manage the horizontal tables efficiently, we can store them as the vertical format of tables which has dimension attribute names as their columns thus transforms the columns of horizontal tables into rows. In this way, every queries for horizontal tables have to be transformed into those for vertical tables. This paper proposed a technique for transforming horizontal table queries into vertical table ones by utilizing not only traditional relational algebraic operators but also the PIVOT operator which recent DBMS versions are providing. For achieving this goal, we designed a relational algebraic expression equivalent to the PIVOT operator and we formally proved their equivalence. Then, we developed a transformation technique for horizontal table queries using the PIVOT operator. We also performed experiments to analyze the performance of the proposed method. From the experimental results, we revealed that the proposed method has better performance than existing methods.

• The korean journal of orthodontics
• /
• v.38 no.1
• /
• pp.31-40
• /
• 2008

Objective: This study investigated the skeletal and dentoalveolar changes after intrusion of maxillary posterior teeth using miniscrew implants during the treatment and posttreatment period. Method: The subjects consisted of 11 adults (1 male, 10 females) whose open bites were treated by posterior teeth intrusion with miniscrew. The lateral cephalometric x-rays of pre-treatment, post-treatment, and the retention period were evaluated. Results: The average intrusion of maxillary posterior teeth at the end of the treatment period was 2.22 mm (p < 0.001) and the average extrusion of maxillary posterior teeth at the end of the 17.4 month retention period was 0.23 mm (p = 0.359). The relapse rate was calculated at 10.36%. A decrease in overbite after the 17.4 month retention period was 0.99 mm (p < 0.05). The relapse rate was calculated at 18.10%. The skeletal changes and vertical height change of maxillary posterior teeth during the retention period was statistically insignificant, but there was a significant decrease in overbite (mean 0.99 mm, p < 0.05). The amount of intrusion and the overbite improvement from treatment significantly correlates to the degree of relapse. Conclusions: The results indicate that intrusion of the maxillary posterior teeth using miniscrews is an effective, non-surgical treatment modality which can reasonably be used to address adult open bite.

• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.83-90
• /
• 2013

This study attempts interpretation of vertical montage expressed in assoziation montage focused on animation, Paprika. Montage has been continuously studied by Pudovkin, Eisenstein, Jacques Aumont and others till now. However, existing studies focused on the visual image of montage. Image is made of visual element and aural element. These two interact with each other and maximize the effect. It is believed that the study subject can be approached in more depth, if aural elements would be analyzed based on the assoziation montage which analyzed visual image in previous studies. Accordingly, this study explores and analyzes how vertical montage has been used in logical montage and optical conflict montage and what meanings they generated. The analysis results suggested followings. In logical montage and optical conflict montage, vertical montage complemented visual image by natural concurrence as a whole. Vertical montage also showed linked relationship, which reflects overall emotion by melodious concurrence. In addition, when there was melodious concurrence at certain time, place or unclear space, the elements showed continuity which made them link with relationship. However, when the role that cuts that continuity, in other words, when the tonal element, which let audience partially immerse, would be properly used when the space and time would change or get reversed, the effect was maximized. It also expressed a turning point of an event and enhanced the concentration of audience on the characters.