• Information and Communications Magazine
• /
• v.33 no.8
• /
• pp.52-62
• /
• 2016

해양에서 음파를 사용하여 수중통신을 시도할 경우 해양매질은 음향 도파관(acoustic waveguide)의 역할을 하게 되고, 이 경우 해양환경의 변동성과 그에 따른 음파와 매질의 간섭에 의해 수중통신 채널의 변동성이 발생한다. 수중음향 채널은 대역 제한 채널이면서 잔향음 제한 채널이고 강한 도플러 변이 채널이므로 수신된 통신 신호는 육상통신에 비해 심한 인접 심볼간 간섭(intersymbol interference)과 위상변이를 가지게 된다. 따라서 수중통신을 시도함에 있어 이러한 해양환경 변동성과 그에 따른 수중음향 채널 변동에 대한 충분한 고려가 필요하다. 본 논문은 수중통신 시스템 구성에 도움을 줄 수 있도록 수중통신 채널에 영향을 미치는 해양 매질의 기본적 특성에 대해 소개하고 수중통신 채널과의 상관성 및 환경 변동성에 따른 통신채널의 변동성에 대해 소개하고자 한다.

• Information and Communications Magazine
• /
• v.33 no.8
• /
• pp.63-70
• /
• 2016

본고에서는 최근 활발하게 연구되고 있는 수중 음향통신을 위한 물리계층 기술에 대하여 알아 본다. 수중음향통신은 지상의 전파를 이용한 무선 통신 기술과 달리 음파를 이용한다. 음파는 수중에서 약1500m/s로 매우 저속이고 시간에 따른 다중 경로와 해수면과 해저면에서의 반사가 발생한다. 또한 수온, 염분, 수압, 해류와 해저지형 등에 의해 신호의 왜곡 및 손실이 일어나기 때문에 수중음향통신은 지상에서 전파를 이용한 통신에 비하여 매우 어려운 일이다. 본고에서는 이러한 수중음향채널의 특성을 살펴보고 링크버짓 계산을 한다. 그리고 수중음향통신을 위한 물리계층 변조기법을 살펴본다. 특히 OFDM 변조기법에 대하여 자세히 설명하고 실해역 측정을 통한 수중채널 특성을 기반으로 채널을 모델링하고 OFDM 변조기법을 위한 파라미터 선정 및 성능비교를 하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.110-117
• /
• 2012

As the demand for underwater systems providing pollution monitoring, marine ecosystem observation, surveillance monitoring is increased, acoustic modem for short-range underwater communication is spotlighted as one of significant research topics. Typically, in shallow water, it is so hard to analyze acoustic wave which undergoes spreading, absorption, reflection and scattering through transmission that there are limited advanced results. Furthermore, in order for the modem to be loaded in a fixed node or a moving vehicle in shallow water, its size should be small enough. In this paper, we address underwater acoustic channel model and design and implement an efficient micro acoustic modem which is adequate for short-range underwater communication. The developed modem is verified in a lake by varying working range and data rate up to 500 meters and 2 kbps, respectively.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.145-149
• /
• 2016

For obtaining high speed data rate, underwater acoustic communication has several problems by the different environmental problem. To achieve high speed data rate, a method of multiple antennas have been researched. V-BLAST Algorithm is a detection method applied to terrestrial wireless communications. In this paper, BER performance of VBLAST detection for MIMO system is analyzed in the paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.231-234
• /
• 2008

The paper proposed the new underwater wireless communication system fitted to non-linear acoustic channel. Generally, in non-linear acoustic channel, one used to do acoustic communication using parametric effect that is some effect caused from acoustic wave having frequency different of two primary acoustic wave frequency. In the paper, Offset PSK communication method fitted to non-linear acoustic channel was proposed, and it was demonstrated through simulations.

• Journal of KIISE:Information Networking
• /
• v.35 no.4
• /
• pp.337-344
• /
• 2008

Underwater acoustic sensor networks exhibit characteristics such as high propagation delay and low data rates, which are different from those of terrestrial wireless networks. Therefore, the conventional protocols used in wireless networks can be restrictive and inefficient when applied to underwater acoustic sensor networks. In this paper, we propose a medium access control protocol (MAC) to enhance the energy efficiency and throughput in underwater acoustic sensor networks. The proposed protocol employs a slot-based competition mechanism that reserves a time slot to send a data packet in advance. In the proposed protocol, collision between nodes can occur due to competition to obtain a slot. However, the proposed protocol minimizes the collisions between nodes because the nodes store the reservation information of the neighboring nodes, this reduces unnecessary energy consumption and increases throughput. We perform a simulation to evaluate the performance of the proposed protocol with regard to the energy consumption, the number of collision, channel utilization, throughput and transmission delay. We compare the proposed protocol with the conventional protocol, and the performance results show that the proposed protocol outperforms the conventional protocol.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.21-28
• /
• 2016

This paper presents a cooperative transmission scheme for underwater acoustic sensor networks to improve packet transmission rate and reduce energy consumption. Source node transmits duplicated information relayed by distributed antennas called a virtual antenna array. Destination node combines that information to reduce packet error rate. The suggested cooperative scheme enhances the reliability by providing high diversity gains through intermediate relay nodes to overcome the distinct characteristics of the underwater channel, such as high transmission loss, propagation delay, and ambient noises. It is suggested that the algorithm select destinations and potential relays from a set of neighboring nodes that utilize distance cost, the residual energy of each node and local measurement of the channel conditions into calculation. Simulation results show that the proposed scheme reduces average energy consumption, response time, and increases packet delivery ratio compared with the SPF(Shortest Path First) and non-cooperative scheme using OPNET Moduler.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.878-885
• /
• 2011

Due to reflect at surface of the water and limit bandwidth, it is difficult to design underwater acoustic communication systems with high-reliability and high transmission rate. Therefore the trends of underwater communication is transformed from single sensor to multiple sensor studies. However, underwater MIMO communication techniques have a high correlation value between multiple sensors on transmitters and receivers in underwater environments, it is difficult to expect space diversity gain on muli-path channels. Therefore, this paper proposed the MISO communications system with two transmit sensors and single receiver sensor, and analyzed its performance using the LDPC codes and channel compensation algorithm.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.258-268
• /
• 2011

Underwater acoustic sensor networks can be used disaster prevention and environmental monitoring systems in underwater environments. Because, the underwater environment is different from the ground, the long propagation delay, low transfer rates and limited bandwidth characteristics should be considered. In this, paper will propose the MAC protocol that allocates time slot into each node according to priority policy through the period of contention-free slot reservation in underwater acoustic sensor networks in order to avoid collision and minimize energy consumption waste. We perform mathematical analysis to evaluate the performance of the proposed protocol with regard to the collision probability, the energy consumption by collision, throughput and channel utilization. We compare the proposed protocol with the conventional protocol, and the performance results show that the proposed protocol outperforms the conventional protocol.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.32-37
• /
• 2011

Underwater communication is affected by reverberation and noise characteristics of the underwater channel and time delay takes place by multipath. Hence, Signal is distorted and a lot of error is generated in the transmitting/receiving by multipath effects, so a channel coding for error correction is required. We propose a channel coding algorithm which is possible to correct error of received signal. We compare and analyze BER(bit error rate) performance depending on the depth of each transmitter-receiver using channel coding algorithm. QPSK was used as a modulation method, and 1/2 code rate convolution coding was used as a coding rate. A convolution coding method shows increase of BER performances.