• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.5
• /
• pp.919-926
• /
• 2000

The experiment in this study was conducted as a part of an effort to evaluate filter performance with pilot-filters consisting of one mono-media and two dual-media columns. Particle distribution analysis using a particle counter is more sensitive and better than turbidity analysis in observing particle detachments and a breakthrough. In sand media filters having 1.5 m of available head, caution is needed in the head loss of the late stages of filtration, and for dual-media filters, appropriate media configuration and effluent Quality monitoring should be used for preventing the final breakthrough. Also the time of particle breakthrough in the dual media filter can be deferred by increasing bed depth, and it is necessary to use a filtration aid prior to filtration to prevent breakthrough of these intermediate sized particles in high filtration rate.

• Polymer(Korea)
• /
• v.28 no.1
• /
• pp.10-17
• /
• 2004

Poly(vinyl acetate) (PVAc) nanoparticles were synthesized in oil/water miniemulsion polymerization in the presence of low amount of hexadecane as a cosurfactant. The nanoparticles were tested to apply as a drug carrier. The shape of nanoparticles was observed by scanning electron microscopy, and the average particle size and size distribution were examined by particle size analyzer. Inclusion of antibiotic drugs into the nanoparticles was confirmed by CHO, C=O, and OH peak of FT-IR. Size of the nanoparticles were adjusted between 80∼300 nm by changing the homogenization rate and amount of cosurfactant and surfactant. The monomer droplets prepared by miniemulsion method using a cosurfactant were homogeneous and stable compared with those prepared by conventional emulsion polymerization. This might be occurred due to the prevention of Ostwald ripening and coalescence between droplets by using hexadecane as a cosurfactant.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.2
• /
• pp.113-123
• /
• 1996

This experiment was carried out to compare with the physico-chemical properties of granular fused magnesium phosphates which were two domestic products(Pungnong Biryo Industrial Co., LTD and Kyunggi Chemical Industrial Co., LTD) and a imported Chinese product. The changes of pH, distribution of particle size, disintegration in water and in soil, hardness in soil, chemical composition, and dissolution rates in water, in soil and in 2% citric acid solution were investigated. The changes in pH were bigger in Jungmun series(black volcanic soil), in the imported chinese product, and in Jungmun series with the larger quantities applied. The domestic products were lower in pH, calcium, alkalinity and 1/2N-HCl soluble silicate than the Chinese product but total(Aqua regia) soluble phosphate, 2% citric acid soluble phosphate, 1/2N-HCl soluble and 2% citric acid soluble magnesium, and 2% citric acid soluble manganese concentration were similar among the domestic products and the imported product. In particle sizes, Chinese product was the biggest, Kyunggi product was the next, and Pungnong product was the smallest. The changes of disintegration rate in water and in soil were smaller in Pungnong and Kyunggi products at the early days of dissolution, and there were decreased with the order of Kyunggi product> Chinese product> Pungnong product at the latter days. The hardness of the products in soil was the strongest in Kyunggi product, the next was Pungnong product and Chinese product was the weakest so as to hardly measurable. The changing dissolution rates of 2% citric acid soluble phosphate concentration of granular fused magnesium phosphate products were the highest in Kyunggi product and the lowest in Pungnong product at the early days, the three products were dissolved over 90% within 50 days, and there were no clear difference among the products after 70 days of dissolution. The dissolution rates of 2% citric acid soluble phosphate concentration of granular fused magnesium phosphate products in soil were the highest in Pungnong product and Chinese product was the lowest, but they were less than 60% in 100 days of dissolution.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.455-462
• /
• 2000

The objective of this study was to examine the physicochemical characteristics of coagulation reaction between loess and red tide organisms (RTO) and its feasibility, in developing a technology for the removal of RTO bloom in coastal sea. The physicochemical characteristics of loess were examined for a particle size distribution, surface characteristics by scanning electron microscope, zeta potential, and alkalinity and pH variations in sea water. Two kinds of RTO that were used in this study, Cylindrothen closterium and Skeietonema costatum, were sampled in Masan bay and were cultured in laboratory. Coagulation experiments were conducted using various concentrations of loess, RTO, and a jar tester. The supernatant and RTO culture solution were analyzed for pH, alkalinity, RTO cell number. A negative zeta potential of loess increased with increasing pH at $10^(-3)M$ NaCl solution and had -71.3 mV at pH 9.36. Loess had a positive zeta potential of +1,8 mV at pH 1.98, which resulted in a characteristic of material having an amphoteric surface charge. In NaCl and $CaCl_2$, solutions, loess had a decreasing negative zeta potential with increasing $Na^+\;and\;Ca^(+2)$ ion concentration and then didn't result in a charge reversal due to not occurring specific adsorption for $Na^+$ ion while resulted in a charge reversal due to occurring specific adsorption for $Ca^(+2)$ ion. In sea water, loess and RTO showed the similar zeta potential values of -112,1 and -9.2 mV, respectively and sea sand powder showed the highest zeta potential value of -25.7 mV in the clays. EDLs (electrical double-layers) of loess and RTO were extremely compressed due to high concentration of salts included in sea water, As a result, there didn't almost exist EDL repulsive force between loess and RTO approaching each other and then LVDW (London-yan der Waals) attractive force was always larger than EDL repulsive force to easily form a floe. Removal rates of RTO exponentially increased with increasing a loess concentration. The removal rates steeply increased until $800 mg/l$ of loess, and reached $100{\%}$ at 6,400 mg/l of loess. Removal rates of RTO exponentially increased with increasing a G-value. This indicated that mixing (i.e., collision among particles) was very important for a coagulation reaction. Loess showed the highest RTO removal rates in the clays.

• Journal of the Korean Geographical Society
• /
• v.39 no.2
• /
• pp.269-282
• /
• 2004

Luminescence dating of a coastal dune from the Shindu dunefield on the T'aean Peninsula shows that deposition of the dune structure began about 500-600 years ago. The lower section of the dune has remained stable since then but the upper part yields an age of about 30 years, suggesting reactivation or additional deposition since the 1970's. The two samples that were collected from the lower part of the dune at depths of 3.5 m and 2.0 m below the surface differ by an age interval of about 50-70 years. This indicates a net depositional rate of around 2.5 cm a year which is relatively slow for a coastal dune. Whilst only one dune structure has been dated for the time being and even though the dunefield was probably established much earlier in the Holocene, the OSL ages obtained demonstrate that some dunes in the area could be younger than 1000 years. Such chronologies point to a dynamic environment where the dune structures are not permanently fixed. Sedimentological properties of the dune sands are consistent with those of particles initially deposited under subaqueous conditions and then later transported by wind.