• The Journal of the Acoustical Society of Korea
• /
• v.12 no.3
• /
• pp.34-42
• /
• 1993

수중운동 추적체계의 추적 성능은 표적에 부착된 핑거로부터의송신음향이 수중센서에 도달하기 까지의 시지연과, 해저에 부설된 각 센서가 시지연을 이용하여 기하학적으로 계산하는 LOP를 얼마나 정확하게 추출하느냐에 달려있다. 본 논문에ㅓ는 수중운동 추출하느냐에 달려있다. 본 논문에서는 수중운동 추적체계의 추적성능을 예측하기 위하여 먼저 CRLB를 이용한 시지연 예측오차의 기준경계식을 유도하고, 임의 표적운도에 이를 적용시켜 추적거리오차를 추출하였다. 시뮬레이션 결과, 표적이 원형 기동하는 경우보다 직선 기동하는 경우에 표적위치에 따라 오차의변화가 더 심하고, 수중운동 추적체계의 이론적 설계성능은 주파수 대역에 의해 영향을 가장 많이 받음을 확인하였다. 한편 4km*4km 범위의 수중센서 패턴을 사용하고 주파수 대역폭을 200Hz로 취한 경우 시간지연에 의한 수중운동 추적체계의 이론적 추적오차는 0.24m 이내로 시뮬레이션 되었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.131-136
• /
• 2017

High speed under water vehicle by using solid rocket motor, which is a natural cavitation type, was tested. The vehicle's speed and running distance was measured, and pressure sensors installed on the surface of the vehicle show pressure-time history of pressures according to the development of the supercavitation. Underwater cameras installed on the wall of the test pool recorded whole processes from the onset of the supercavitation to fully developed one. CNU-SuperCT based on 2-dimensional inviscid theoretical analysis was used to simulate the test result. In consideration of CNU-SuperCT does not include the control fins of the vehicle, simulation results agree with test results very well. Also, pictures from underwater cameras support the test results.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.12-17
• /
• 2018

A natural cavitation-type high-speed underwater vehicle with solid rocket motor is tested, and its speed and running distance are measured. The outputs from pressure sensors on the surface of the vehicle reveal a pressure-time history reflecting the development of supercavitation. Underwater cameras installed on the wall of the test pool record the entire process from the onset of supercavitation to its full development. CNU-SuperCT, based on two-dimensional inviscid theoretical analysis, is used to simulate test results. Considering CNU-SuperCT does not include the control fins of the vehicle, simulation results agree with test results very well. Additionally, pictures from underwater cameras support the test results.

• Journal of the Korea Society for Simulation
• /
• v.31 no.4
• /
• pp.11-22
• /
• 2022

Unlike a short-range, a long-range underwater acoustic communication(UWAC) uses low frequency signal and deep sound channel to minimize propagation loss. In this case, even though communication signals are modulated using a covert transmission technique such as spread spectrum, it is hard to conceal the existence of the signals. The unconcealed communication signal can be utilized as active sonar signal by enemy and presence of underwater vehicles may be exposed to the interceptor. Since it is very important to maintain stealthiness for underwater vehicles, the detection probability of friendly underwater vehicles should be considered when interceptor utilizes our long-range UWAC signal. In this paper, we modeled a long-range UWAC environment for analyzing the detection performance of underwater vehicles and proposed the region of interest(ROI) setup method and the measurement of detection performance. By computer simulations, we yielded parameters, analyzed the detection probability and the detection performance in ROI. The analysis results showed that the proposed detection performance analysis method for underwater vehicles could play an important role in the operation of long-range UWAC equipment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.83-85
• /
• 2015

The Purpose of this paper was to carry out basic study on development of real-time submarine-hnadling simulator. The author adopt the Unmanned Undersea vehicle(UUV), which has taken the shape of manta[1]. They call here it Unmanned Undersea Vehicle(UUV). UUV is based on the same design concept as UUV called Manta Test Vehicle, which was originally built by the Naval Undersea Warfare Center, USA[1]. The present study deals with prediction of manoeuvring motion of UUV at general drift angles and large drift angles. The dynamic mathematical model with six degrees of freedom is revised and supplemented in order to describe accurately motion of UUV. The hydrodynamic derivatives related to motion are obtained from previous work[2].

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.709-715
• /
• 2015

Underwater gliders do not typically have separate propellers for forward motion. They generate propulsive forces based on the difference between their buoyancy and gravity. They can control the volume from the buoyancy engine to adjust the propulsive force. In addition, the attitude of the underwater glider is controlled by a rubberless motion controller. The motion controller can change the mass center and moment of inertia of the inner moving mass. Owing to the change in these parameters, the attitude of the underwater glider is changed. In this study, we derive nonlinear, six degree of freedom (DOF) mathematical models for the motion controller and buoyancy engine. Using these equations, we perform dynamic simulations of the proposed underwater glider, and verify the suitability of the design and dynamic performances of the proposed underwater glider. We then perform the motion control simulation for the pitch and roll angle, and analyze the dynamic performance according to the pitch and roll angles.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.6
• /
• pp.614-619
• /
• 2015

In this study, a dynamics model was developed to predict the motion performance of an Autonomous Underwater Vehicle (AUV). The dynamics model includes basic dynamic state variables of the hull and force terms to determine the motion of the AUV. The affecting terms for the forces are hydrostatic force, added mass, hydrodynamic damping, lift and drag forces. The force terms can be calculated using analytical and Computational Fluid Dynamics methods. For the underwater motion simulation, a simple PD controller was used. Also, the AUV was tested in a water tank and near sea for the partial verification of the fluid drag force coefficients and way-point tracking motions.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.323-330
• /
• 2009

We have been developing an underwater robot for harbour construction using a parallel mechanism The robot is attached to the rope of a crane, which curries a large stone into the undersea The robot's yaw and pitch are controlled by hydraulic cylinders but its roll is uncontrollable. We mount propellers in both side of the robot to generate the roll motion This paper studies on the control for the roll motion of a underwater robot. A gyro-sensor is used to measure the angle in a roll motion We develop the dynamic model to describe the robot's roll motion by a second order non-linear system and identify the model parameters by recursive least square and adaptive identifier. PD control, recursive model based control and adaptive model based control are applied with the dynamic model which computes the control input to compensate disturbances. This paper introduces the underwater robot system and presents the simulated and experimental results of the proposed controller.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2227-2232
• /
• 2013

To obtain the system requirement specification in the beginning of the precision guidance system development, the effectiveness and reliability analysis for the system are necessary. The main purpose of this research is to obtain the system requirement specification for the high speed unmanned underwater vehicles by carrying out the effectiveness analysis using the modeling and simulation scheme. The effectiveness is position error for target position. Reaching accuracy is expected to be affected by the navigation sensor parameter. Assume that the navigation sensors that is consist of inertial navigation system(INS) and doppler velocity log(DVL) is the parameter. To analyze the effectiveness of each parameter, Monte-Carlo numerical simulation is performed in this research. The effectiveness analysis is carried out using circular error probability(CEP) and variance analyze scheme. Considering the cost function, the specification of the navigation sensor is provided. The cost function is consist of the INS and DVL specification and the price of those sensors.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.95-103
• /
• 1999

수중운동체가 수중에서 진행할 때 외부 파도에 의한 불확실한 부하 저항을 받으므로 이에 대응하는 핀(조타) 구동부의 제어 문제를 고려한다. 본 논문에서 제시하는 제어기는 본체로부터의 지정 각도를 부여 받으면 이에 부응하여 핀의 각도와 각속도를 이용하여 제어기의 알고리즘을 구축하여 지정된 경로를 추적하게 한다. 또한 핀의 각속도 정보의 이용이 부득이 어려운 상황에 대처하기 위하여 핀의 각도만을 이용한 출력제어기나 추정기를 설계하여 주위 환경의 불확실성을 극복할 수 있는 제어기를 제안한다. DC서보 모터로 구성괸 핀 구동부에 대해 실제 데이터를 사용하여 제안된 제어기의 성능을 시뮬레이션을 통하여 검증한다.