• Title/Summary/Keyword: 수준 적합성

Search Result 1,529, Processing Time 0.035 seconds

The Usefulness Evaluation of Radiation Shielding Devices in PET Scan Procedures (PET 검사 프러시저별 방사선 차폐기구의 유용성 평가)

  • Kim, Yeong-Seon;Seo, Myeong-Deok;Lee, Wan-Kyu;Jeong, Yo-Cheon;Kim, Sang-Wook;Seo, Il-Teak;Song, Jae-Beom
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.14 no.2
    • /
    • pp.65-76
    • /
    • 2010
  • Purpose: he use of PET scanners and the number of patient in Korea have been increased for recent several years dramatically. For this reason, technologists have more possibilities to be exposed to the radiation. The hospitals using PET scanners should make an effort to reduce the radiation exposure dose. The purpose of this study was to evaluate the radiation exposure does when using radiation shielding devices. The evaluation was performed through questionnaire survey and experiment. Materials and Methods: First, the technologists who had experience working in PET center in 2008-2009 were surveyed with questionnaire and TLD Figures, personal opinion of utilization of radiation shielding devices are analyzed. Second, we measured the shielding rate of shielding devices which have been using in PET study procedures. We divided the procedures into four steps; distribution, moving, injection of $^{18}F$-FDG and patient setup. Results: First, the results of this survey, using of L-block+Syringe shield, L-block, Syringe shield, No shield during the injection, were each 58.5%, 20%, 9%, 12.3%. The TLD values according to utilization of radiation shield, using both L-block+Syringe Shield and L-block showed the lower TLD values, and Syringe shield only or No shield showed the higher TLD values. Second, the results of experiments according to PET study procedures measured the shielding rates as follows. The shielding rates during the distribution using L-block, L-block+Apron shield were measured 97.4%, 97.7%. The shielding rates during the $^{18}F$-FDG delivery to the injection room using mobile Syringe shield, Syringe holder, Syringe shield carrier were each 81.7%, 98.9%, 99.7%. The shielding rates during the injection using Syringe shield, L-block, L-block+Syringe shield were measured each 51.9%, 98.3%, 98.7%. The shielding rates of Apron were measured in each 30, 60, 90, 120, 150 cm distance. The measurement were each 16.9%, 14.2%, 16.6%, 17.1%, 18.1%, 18.6%. Conclusion: The most effective method for radiation shielding is to using L-block during the $^{18}F$-FDG distribution and Syringe shield carrier during in moving $^{18}F$-FDG. For the $^{18}F$-FDG injection, L-block+Syringe shield have to be used. The shielding effect of Apron has shown average 16.4%. According to the survey of questionnaire, the operators recognized well risk of the radiation exposure but, tended ignore in working. The radiation dose according to recognition of radiation exposure risk was not relevant. but radiation dose according to utilization of radiation shield lower the more use it. The main reason of no use of shielding devices is cumbersome, 55% of the respondents answered. I'm sure, by use of radiation shield in all PET procedure, radiation exposure will be reduced considerably.

  • PDF

Quality Characteristics and Antioxidant Activities of Cookies Supplemented with Aronia Powder (아로니아 분말을 첨가한 쿠키의 품질 특성과 항산화 활성)

  • Lee, Jun Ho;Choi, Ji Eun
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.45 no.7
    • /
    • pp.1071-1076
    • /
    • 2016
  • The feasibility of incorporating aronia powder (AP) as a value-added food ingredient into convenient food products was investigated using cookie as a model system. AP was incorporated into cookies at amounts of 0, 1, 2, 3, and 4% (w/w) based on total weight of wheat flour. The pH level of cookie dough decreased significantly with increasing levels of AP (P<0.05), whereas moisture content and density were not directly affected by levels of AP incorporation. The spread ratio increased significantly upon addition of AP; however, it was not significantly affected by level of AP incorporation. The loss rate of cookies decreased significantly with increasing levels of AP (P<0.05). In terms of color, lightness and yellowness decreased while redness increased significantly (P<0.05) with increasing levels of AP. Use of AP significantly decreased hardness of cookies (P<0.05), but no significant differences were found between control and 1% sample, 1% and 2% sample, 2% and 3% sample, and 3% and 4% sample (P>0.05). 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid (ABTS) radical scavenging activities were significantly elevated by AP addition, and they increased significantly as AP concentration increased in the formulation (P<0.05). Correlation analysis indicated that acceptances of color and chewiness were negatively correlated well with the level of AP incorporation, density and moisture content of cookie dough, and cookie redness, whereas they were positively correlated with pH of cookie dough, loss rate, and hardness (P<0.01 or P<0.05). Finally, consumer acceptance test indicated that the highest levels of AP incorporation (4%) had an adverse effect on general consumer preferences. In contrast, cookies with moderate levels of AP (2%) are recommended based on overall scores to take advantage of the antioxidant properties of AP without sacrificing consumer acceptability.

The Selection of the Suitable Site for Forest Tree(Pinus thunbergii) (임목(林木)((해송(海松)) 적지선정(適地選定)에 관한 연구(硏究))

  • Chung, Young Gwan;Park, Nam Chang;Son, Yeong Mo
    • Journal of Korean Society of Forest Science
    • /
    • v.82 no.4
    • /
    • pp.420-430
    • /
    • 1993
  • This study was conducted to investigate the effect of the forest environmental factors(5 items) and physico-chemical properties of soil(13 items) on the growth of Pinus thunbergii stands. The 218 plots were sampled over the coastal district of the whole country. In statistical analysis, the explanatory variables were soil and environmental factors(18 items), and the response variable was the site index of Pinus thunbergii stands. Data computation was processed in order of preparation of original data, computation of inner correlation matrix table by correlation analysis, calculation of partial correlation coefficients and coefficients of determination, estimation of regression equation by stepwise begression analysis, and stepwise regression analysis by factor score of factor analysis. The main results obtained were summarized as follows ; 1. The site index in Pinus thunbergii stands way highly correlated with effective soil depth(r=0.8668), slope percentage, organic matter, and total nitrogen. 2. According to the coefficients by partial correlation analysis, effective soil depth(r=0.6270), slope percentage (r=-0.5423) and base saturation(r=0.3278) among environmental factors had a great effect on tree growth. 3. With stepwise regression analysis, the factors effecting on the Pinus thunbergii stands growth were effective soil depth, slope percentage, organic matter, base saturation, soil pH, content of silt, exchangeable Ca, and etc. 4. Estimation equation for the site index of Pinus thunbergii stands was given by $Y=13.2691+0.0242\;X_2-1.2244\;X_4+0.6142\;X_5-0.3472\;X_{11}+0.0355\;X_{13}+0.1552\;X_{15}-0.1002\;X_{17}$. The coefficient of determination for the estimation model was 0.77, which was significant at the 1 percent level. 5. In result of factor analysis by the environmental factors, principal components were 6 factors, and communality contribution percentage was 71.1 percent. 6. By stepwise regression analysis between factor score and site index of Pinus thunbergii stands, the factor group effecting on site index was 5 principal components. The coefficients of determination was 85 percent, which was significant at the 1 percent level. In conclusion, on the occasion of analizing which factors to effect on the tree height growth in Pinus thunbergii stands the stepwise regression analysis proved to be greatly significant. Also the management of Pinus thunbergii stands should be working by the above selected growth factors.

  • PDF

Adoption and Efficacy of ISO 15189 in Medical Laboratories for Diagnostic and Research (메디컬시험기관에서 ISO 15189 도입의 필요성과 시행의 효용성)

  • Yang, Man-Gil;Lee, Won Ho;Jun, Jin Hyun
    • Korean Journal of Clinical Laboratory Science
    • /
    • v.48 no.2
    • /
    • pp.158-167
    • /
    • 2016
  • The requirements for medical laboratories ISO 15189 is examined in organization and a quality management system, stressing the importance of evidence, document control, and control of records and clinical material. Medical services are provided from the areas of resource management, and pre-examination, examination and post-examination processes. The main goal of ISO 15189 accreditation is to improve the quality of laboratory services provided for patients and clinical users not only through compliance with consensually developed and harmonized requirements but also by adopting the philosophy of continual improvement using the Plan-Do-Check-Act cycle. Laboratory quality should be evaluated and improved in all steps of the testing process as the state-of-the art indicates that the pre- and post-analytical phases are more vulnerable to errors than the intra-analytical phase. The Korea Laboratory Accreditation Scheme (KOLAS), a national accreditation body, provides medical laboratory accreditations for appropriate approaches to evaluating the competence of a medical laboratory in providing effective services to its customers and clinical users. Adoption of ISO 15189 in 2010s as a government policy has been delayed, and only 5 laboratories have been accredited to date in Korea. The medical laboratories should seek the adoption of ISO 15189 with a positive attitude for quality improvement and strengthening of international competitiveness.

Study on Reduction Effect of the Non-Point Pollutants through Riparian Buffer Zones (비점오염부하 저감을 위한 수변완충지대의 효율적 조성 연구)

  • Choi, I-Song;Kim, Sung-Won;Jung, Sang-Jun;Woo, Hyo-Seop;Oh, Jong-Min
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2007.05a
    • /
    • pp.1793-1797
    • /
    • 2007
  • 한강 "수변구역"에서 비점오염물질의 공공수역 유입을 억제하기 위한 다양한 방법들 중에서 보편적이고 자연친화적인 방법은 다양한 생물의 서식공간이며, 동시에 본류로 유입되는 과정에서 수질을 정화시키는 수질개선 공간인 수변완충구역, 또는 지대를 설정하여 관리하는 것이다. 그러나 이러한 수변완충지대 효과 분석 및 설정에 관한 연구는 국내에서 아직 수행되지 않았다. 본 연구의 목적은 수변구역의 자정능력을 높이는 것은 물론 그 밖의 하천 연안에서 비점오염물질의 차단과 처리능력을 증진시키고 수변 생태계의 서식처 보전 및 복원을 위해서 수변완충지대의 수질정화 기술개발과 생물다양성을 창출하는 수변완충지대 조성 기법을 개발하는데 있다. 본 연구에서는 기존 수변완충지의 추가적인 조성과 보완, 시험완충지 생태구조 및 기능 기초조사, 시험완충지 오염부하 저감효과의 실험 및 분석, 수변완충지대 설치 구상 등의 연구를 수행하였다. 수행 지역은 한강수계 지역으로 남한강 수변인 경기도 양평군 병산리에서 실시하였으며, 잔디와 갈대, 갯버들, 혼합지역, 자연그대로의 상태(대조지역)의 5 구역으로 구분하였고, 깊이별로 샘플을 채취하여 유입수와 표면유출, 하부유출을 비교해 보았다. 연구 결과, 5 가지 구역 중 잔디 구역의 SS, T-N, T-P, TOC의 제거 효율이 각각 76.7%, 85.2%, 97.6%, 83.3%로 가장 좋은 오염물질 제거 효율을 보였으며, 깊이 별 분석에서는 표면유출에서 하부유출로 갈수록 월등한 효율을 보였다. 따라서 본 연구를 통하여 비점오염원에 대한 한강수계의 수자원 보호 효과를 기대할 수 있고, 수변완충지대의 조성, 유지관리기술의 개발을 통한 수변완충지대의 계획과 설계에 직접적인 기여를 할 수 있으며, 수변구역에 설치 가능한 Riparian Buffer Zone의 중요성과 효율성을 알려 현재 하상 저니 준설 및 폭기 위주의 사업에서 생태 공학적 복원을 적극 고려한 정화사업으로 확대 추진하고자 한다.해결책을 얻어내는 상호보완적인 결과를 추구한다. 그가 디자인하는 작품은 전형적인 이미지를 내포하지 않는다. 즉 그의 작품은 기존의 가치와 이념적인 것은 배제하고, 창의적인 개념을 도출하였다.형모서리는 건물 특화 성격이 강하므로 불가피할 경우 소형 액센트 광고 위치를 미리 벽면으로 할애하는 것이 경관 및 입면계획에 유리한 것으로 분석되었다. 불확실도 해석모형 등의 새로운 기능을 추가하여 제시하였다. 모든 입출력자료는 프로젝트 단위별로 운영되어 data의 관리가 손쉽도록 하였으며 결과를 DB에 저장하여 다른 모형에서도 적용할 수 있도록 하였다. 그리고 HyGIS-HMS 및 HyGIS-RAS 모형에서 강우-유출-하도 수리해석-범람해석 등이 일괄되게 하나의 시스템 내에서 구현될 수 있도록 하였다. 따라서 HyGIS와 통합된 수리, 수문모형은 국내 하천 및 유역에 적합한 시스템으로서 향후 HydroInformatics 구현을 염두에 둔 특화된 국내 수자원 분야 소프트웨어의 개발에 기본 토대를 제공할 것으로 판단된다.았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이를 보이지 않음을 알 수 있었다. 자극에 차이가 있지 않나 추측되며 이에 관한 추후 연구가 요망된다. 총대장통과시간의 단축은 결장 분절 모두에서 줄어들어 나타났으나 좌측결장 통과시간의 감소 및 이로 인한 이 부위의 통과시간 비율의 저하가 가장 주요하였다. 이러한 결과는 차가운 생수 섭취가 주로 결장 근위부를 자극하는 효과를 발휘하는 것이 아닌가 해석된다. 이와 같은 연구결과를 통해 생다시마를 주원료로 개발된 생다시마차와 생다시마 음료가 만성 기능성 변비 증세를 개선하는 효능이 잠재적으로 있음을 확인하였다. 그러나 생약제재의 변비약 수준으로 변비 개선 효능을 증대하기 위해서는 재료 배합비의 개선이나 대장 운동기능을 향상시키는 유효성분의 보강 등이 필요하다는 점도 알 수 있었다.더불어 산화물질 해독에 관여하는

  • PDF

A Late-Maturing and Whole Crop Silage Rice Cultivar 'Mogwoo' (만생종 총체사료용 벼 신품종 '목우')

  • Lee, Sang-Bok;Yang, Chang-Ihn;Lee, Jeom-Ho;Kim, Myeong-Ki;Shin, Young-Seop;Lee, Kyu-Seong;Choi, Yong-Hwan;Jeong, O-Young;Jeon, Yong-Hee;Hong, Ha-Cheol;Kim, Yeon-Gyu;Jung, Kuk Hyun;Jeung, Ji-Ung;Kim, Junhwan;Shon, Ji-Young
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.33 no.2
    • /
    • pp.81-86
    • /
    • 2013
  • 'Mogwoo', a new high yield and whole crop silage rice (Oryza sativa L.) cultivar, was developed by the rice breeding team of the National Institute of Crop Science, RDA, Suwon, Korea, from 1999 to 2009, and was released in 2010. It was derived in 1999 from a cross between Dasanbyeo, having a high yield, and Suweon431/IR71190-45-2-1. A promising line, SR25848-C99-1-2-1, selected by the pedigree breeding method, was designated the name of 'Suweon 519' in 2007. This cultivar has about 155 days of growth period from seeding to heading, and is tolerance to lodging, with erect pubescent leaves as well as a long and thick culm. This cultivar has the same number of tillers per hill and higher spikelet numbers per panicle compared to Nokyang. 'Mogwoo' has longer leaves compared with other Tongil-type varieties. This new variety is resistant to grain shattering, leaf blast, bacterial leaf blight, and small brown planthopper. The biomass yield of 'Mogwoo' was 1,956 kg/10a in a regional test over three years. The result shows that 'Mogwoo' is adaptable to central and south-east plain areas of Korea.

THE PALATAL MORPHOLOGY OF THE CHILDREN WITH CLASS II DIV.1 MALOCCLUSION IN MIXED DENTITION : A STUDY USING THREE-DIMENSIONAL LASER SCANNER (혼합치열기 II급 1류 부정교합 어린이의 구개형태 : 3차원 레이저 스캐너를 이용한 연구)

  • Yang, Jung-Hyun;Lee, Sang-Hoon;Hahn, Se-Hyun;Kim, Chong-Chul
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.32 no.2
    • /
    • pp.270-277
    • /
    • 2005
  • The purpose of this study was to clarify the palatal volume and anterior palatal slope of the children with class II div.1 malocclusion and normal occlusion in mixed dentition(Hellman dental age III A) using three-dimensional laser scanner. Samples were consisted of 31 children with skeletal class II div.1 malocclusion in mixed dentition and 29 children with normal occlusion and profile among the contestants in 2000-2004 Healthy Dentition Contest in Seoul. Totally 60 maxillary study model were taken. Each cast was scanned by three-dimensional laser scanner (Breuckmann opto-TOP HE, INUS, Korea) and shaped into the three-dimension image by Rapidform 2004 program(INUS, Korea). And the palatal volume and anterior palatal slope of each cast were calculated by Rapidform 2004 program(INUS, Korea). The values were statistically compared and evaluated by independent samples t-test with 95% of significance level. The results were as follows: 1. Palatal volume was significantly lesser in children with class II div.1 malocclusion than that of normal occlusion in mixed dentition(p<0.05). 2. No significant difference in the anterior palatal slope and palatal height was found between the children with class II div.1 malocclusion and normal occlusion in mixed dentition(p>0.05). 3. Palatal length was significantly greater in children with class II div.1 malocclusion than that of normal occlusion in mixed dentition(p<0.01). 4. Intercanine and intermolar width were significantly lesser in children with class II div.1 malocclusion than those of normal occlusion in mixed dentition(respectively p<0.05 and p<0.01).

  • PDF

Comparative accuracy of new implant impression technique using abutments as impression copings with an angulated implant model (경사지게 식립된 임플랜트 모형에서 지대주를 인상용 코핑으로 이용한 새로운 인상법의 정확성 비교 연구)

  • Lee, Hyeok-Jae;Kim, Chang-Whe;Lim, Young-Jun;Kim, Myung-Joo
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.46 no.2
    • /
    • pp.201-208
    • /
    • 2008
  • Statement of problem: A new implant impression technique which use abutments as impression coping, and use resin cement as a splinting material was described. Accuracy of this technique was compared with conventional closed tray and resin splinted open tray technique for a $15^{\circ}$ angled 3-implant model Material and methods: A dental stone master model with 3 linearly positioned implant analogue and a reference framework which was passively fitted to it were fabricated. The center analogue was perpendicular to the plane of model and the outer analogues had a $15^{\circ}$angulation forward or backward. 10 closed tray impressions, 10 resin splinted open tray impressions, 10 abutment-resin framework cementation impressions and 10 abutment-metal framework cementation impressions were made with additional silicone material and poured with dental stone. A light microscope with image processing was used to record the vertical gap dimension between reference framework and analogue of duplicated cast made with each 4 impression techniques. Statistical analysis used one-way ANOVA with post-hoc tests Tukey test of .05 level of significance Results: Significant difference in the vertical gap dimension was found between closed tray technique; 74.3 (${\pm}33.4$)${\mu}m$ and resin splinted open tray technique, and two other new technique. (P<.05) Abutment-metal framework cementation technique;42.5 (${\pm}11.9$)${\mu}m$ was significantly different from resin splinted open tray technique. (P<.05) Abutmentresin framework cementation technique;51.0 (${\pm}14.1$)${\mu}m$ did not differ significantly from resin splinted open tray technique;50.3 (${\pm}16.9$)${\mu}m$. (P>.05) Conclusion: Within limitations of this study, the accuracy of implant level impressions of resin splinted open tray technique was superior to that of closed tray technique. A new technique using abutment and metal framework cementation was more accurate than resin splinted open tray technique.

Effects of Combined Micronutrient(Fe, Mn, Cu, Zn, Mo and B) Application on Forage Traits in Pure and Mixed Swards of Orchardgrass and White Clover III. Changes in the contents and yields of N-compounds(crude/pure protein and soluble N-compounds) in forage plants (Orchardgrass 및 White Clover의 단파 및 혼파 재배에서 미량요소(Fe, Mn, Cu, Zn, Mo, B)의 조합시비가 목초의 특성에 미치는 영향 III. 목초 중 질소화합물(조/순단백질 및 수용성 질소화합물)의 함량 및 수량 변화)

  • 정연규
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.24 no.1
    • /
    • pp.1-10
    • /
    • 2004
  • This pot experiment was conducted to investigate the effects of combined micronutrient application($T_1$;control, $T_2$; Fe, $T_3$; Fe+Mn, $T_4$; Fe+Mn+Cu, $T_5$ ; Fe+Mn+Cu+Zn, $T_6$ ; Fe+Mn+Cu+Zn+Mo, $T_7$ ; Fe+Mn+Cu+Zn+Mo+B) on forage performance of pure and mixed cultures of orchardgrass and white clover. The third part was concerned with the changes in the contents and yields of N-compounds (crude/pure protein and soluble N-compounds) in forages. The results obtained are summarized as follows: 1. The contents of N-compounds(crude/pure protein and soluble N-compounds) were generally different according to the forage species, whether it was a pure or mixed culture, and additional fertilization, especially N. In orchardgrass, these contents were relatively low at the $T_3$ and $T_6$ in both pure and mixed cultures. In white clover, these contents were relatively decreased by the $T_1$, $T_3$, and $T_6$ in mixed culture. 2. The treatments influenced relatively more on the yields of crude/pure protein than on the dry matter yields of forages, and this tendency was more significant in white clover than in orchardgrass. 3. In white clover, the great differences in the yields of crude protein by the treatments occurred especially in mixed culture and at 5th cut without no additional fertilization. In white clover, the positive effects of optimum treatments on the yields of crude protein seemed to be decreased by the additional fertilization, especially N. In mixed culture, the favorable growth of white clover by the optimum treatments tended to be positively related to the favorable contents and yields of N-compounds. The changes in the yields of pure protein were similar to the tendency of crude protein

Comparative Analysis of Nutritional Components of Zophobas atratus Larvae Raised with Artificial Diet and Wheat Branan (인공사료와 밀기울로 사육한 아메리카왕거저리 유충의 영양성분 비교분석)

  • Kim, Sun Young;Kwak, Kyu-Won;Lee, Kyeong Yong;Ko, Hyeon-Jin;Kim, Yong-Soon;Kim, Eunsun;Park, Kwanho;Yoon, Hyung Joo
    • Journal of Life Science
    • /
    • v.30 no.12
    • /
    • pp.1109-1117
    • /
    • 2020
  • In order to verify whether Zophobas atratus is an edible insect, the nutrients and harmful substances of Z. atratus larvae reared with an artificial diet (AD) and wheat bran (WB) were compared and analyzed. Based on dry weight, the crude protein content of Z. atratus larvae reared with an AD was 62.4%, 1.4 times higher than that of those reared with WB (45.2%). The crude fat content was 20.5% in the AD group, 2.3 times less than in the WB group (46.3%). The leucine content was 1.4 times higher in the AD group (4.2%) than in the WB group (3.0%). The glutamic acid content of nonessential amino acids was 1.3 times higher in the AD group (7.0%) than in the WB group (5.3%). The oleic acid content was 1.4 times higher in the WB group (37.0%) than in the AD group (26.7%). The potassium content was 1.1 times higher in the AD group (975.9 mg/100 g) than in the WB group (872.9 mg/100 g). According to the results of the toxic substances analysis, the lead and cadmium levels of the WB and AD groups were standard for edible insects. Pathogenic microorganisms, such as E. coli and salmonella, were not detected in either group. According to the results of the present analysis of nutrition and harmful substances, Z. atratus larvae raised on an AD are safe and contain various nutrients. Therefore, such larvae could be useful sources of food and feed.