• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.363-368
• /
• 2001

Because of rapid damping of light and electromagnetic wave, acoustic wave has been widely used for underwater communication. However, the propagation of the acoustic wave is highly dependent on the environment such as water properties(temperature, pressure, salinity), bottom and surface conditions, etc.. This paper deals with the surface reflection effect on the wave propagation in the underwater anechoic basin in KRISO. Both theortical and experimental approaches are performed and the results are compared.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.118-119
• /
• 2013

마리나 시설 내 계류된 선박 및 레저장비를 악천 후 해상상태와 선박 운항에 의해 발생된 파로부터 장비 및 인명의 안전을 위한 파 제거 장치가 필요하다. 본 연구에서는 국내 각 지자체의 수요에 부응하고 시설 및 인명의 안전을 위한 소파 시스템개발을 목적으로 시제품 제작(설계, 해석, 수조시험 등 수행완료)하였다. 실해상 성능시험에서 항주파의 발생을 위해 시험선박 선정하였으며, 소파장치 전후의 파고계측 등을 위해 부가물을 계측하여 파고를 촬영 및 계측하였다. 개발된 소파장치의 실해상 시험임을 감안해 해상 주위의 조류, 풍속, 인근 해역에서 오는 파랑변형 등에 따른 파랑요소를 고려하여 시험하였다. 부소파제는 약 40~80% 의 에너지 감소율을 보였으며, 유의파고 조건에서 42%의 에너지 감소율을 보였다.

• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.215-215
• /
• 2003

• Journal of The Korean Ophthalmological Society
• /
• v.59 no.11
• /
• pp.1087-1090
• /
• 2018

Purpose: To report a case of trochlear nerve palsy caused by quadrigeminal cistern lipoma located in the dorsal midbrain. Case summary: A 65-year-old male visited our clinic for intermittent vertical diplopia over 2-year period. Symptoms of diplopia had worsened over the past two weeks. He had no previous medical history except having had diabetes for 1 month. The best-corrected visual acuity was 20/25 in the right eye and 20/20 in the left eye. Pupillary examination was not remarkable. Extraocular examination showed 4 prism diopters (PD) left hypertropia at distant gaze and 4 PD exotropia at near gaze, with adduction elevation of the left eye. The Bielschowsky head tilt test revealed 6 PD left hypertropia on the left gaze and orthotropia on the right tilt. Fundus examination showed excyclotorsion of the right eye and incyclotorsion of the left eye. Brain magnetic resonance imaging revealed quadrigeminal cistern lipoma. Prism glasses were prescribed to alleviate diplopia, and we followed up the lesions without further treatment. Conclusions: Trochlear nerve palsy can be caused by quadrigeminal cistern lipoma; however, it is uncommon for this condition to be caused by a compressive lesion. Prompt neuroimaging can be helpful to rule out the causes of this condition in patients with atypical symptoms.

• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.813-818
• /
• 2007

There are the C.W.C and Towing Tank to the model-test equipments of the boat. A model testing of the high speed boat have a difficult in the performance verification because of very a small the scale-ratio of the ship-model and restricted by flow-velocity of the C.W.C and X-carriage velocity of the T.T. In general, the stepped hull boat is a high of fuel-efficiency because of the resistance reduction by a small wetted surface-area in correspond without stepped-hull boat. But It have a tendency to be bad the rolling performance by reduced stern wetted-area In this paper, the high speed stepped planning-boats with & without attached a stern body were performed to compare the effect of resistance and rolling performance by using sea model-test method.

• Journal of Navigation and Port Research
• /
• v.34 no.8
• /
• pp.623-628
• /
• 2010

High speed marine vehicle, such as semi-planing, planing craft have been developed recently. These ships paid attention to the resistance characteristics, especially in high speed region. Model test method is divided to two equipment greatly, first 'Towing tank', second 'C.W.C.'. It is difficult to estimate a resistance characteristics for high speed boat. because these are made for low speed ship. This paper suggests a new model test method and system. This is real sea model test and it's comprised of eight part. Firstly, This method is tested at C.W.C that is possible to using in real sea model tes using low speed boat modelt. And then, Real sea model test and CFD calculation are performed and compared with tow way used high speed boat model. It can be a good way to estimate a performance for high speed boat.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.3
• /
• pp.173-180
• /
• 2007

Oscillating wave amplitude in a bottom-mounted OWC chamber designed for wave energy converter is investigated by applying characteristic wave conditions in Korean coastal water. The effects of shape parameters of OWC chamber in a view of wave energy absorbing capability are analyzed. Both experimental and numerical approaches are adopted and their results are compared to optimize the shape parameters which can result in a maximum power production under given wave distribution. The experiment was carried out in a wave flume under 2-D assumption of OWC chamber. The numerical scheme employed a hybrid Green integral equation which adopts the Rankine Green function inside chamber to take account of fluctuating air pressure, while it uses the Kelvin Green function in outer domain. Air duct diameter, chamber width, and submerged depths of front skirt and back wall of chamber changes the magnitude and peak frequency of wave absorption significantly.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.103-109
• /
• 2012

Samsung Thales has developed a small-sized autonomous underwater vehicle "BOTO" verified by a mathematical model simulation. The hydrodynamic coefficients and drag force were experimented at circulating water channel for validating cruising performance of the AUV. Based on the mathematical model, we simulated turning radius and way-point tracking on horizontal plane using way-point tracking algorithm. In this paper we introduce the vehicle system and the sea trial test results will be shown.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.3
• /
• pp.182-188
• /
• 2014

In an oscillating water column (OWC)-type wave energy conversion system, the performance of the OWC chamber depends on the chamber shape, as well as the incident wave direction and pressure drop produced by the turbine. Although the previous studies on OWC chambers have focused on wave absorbing performance in ideal operating conditions, incident waves do not always arrive normally to the OWC chamber in real sea conditions, especially in fixed devices. The present study deals with experiments and numerical calculations to investigate the effects of wave direction on the performance of the OWC chamber. The experiments were carried out in a three-dimensional wave basin for five different wave directions, including the effect of turbine using the corresponding orifice. The wave elevation inside the chamber was measured at the center point under various incident wave conditions. The numerical study was conducted by using a numerical wave tank-based volume-of-fluid model to compare the results with experimental data and to reveal the detailed flows around the chamber.

• Journal of the Korean Society of Food Culture
• /
• v.5 no.1
• /
• pp.59-75
• /
• 1990

The tzeam is the one of steaming cook that boiled the main material of poultry. meat and the sub-material of vegetables. It is always setted on the main-table in above seven chup ban sang and also kyoja sang. In this thesis, according to the kinds of tzeam in the main material of poultry, meat was to analysis reference frequency to them the materials, the measuring unit of materials, the terms of cooking and kitchen utensil by 47 books published in Korea from 1420 to 1987. 1. It was 37 kinds of tzeam in the main material of poultry, meat. 2. Materials were classified into the main-material, sub-materials, seasioning and decorations. 3. There were 43 kinds of measuring units, of them 18 kinds were for volume, 12 kinds were for quantity, 4 kinds were for length and the rest measuring units were 9 kinds. 4. There were 26 kinds of kitchen utensil for cooking. They were mainly used a hab 1 rice ball with lids, and castles (cast iron castle). 5. There were 27 kinds of cooking terms. The terms of them, 11 kinds were for heating methods, 16 terms of them were for the cutting process.