• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.5
• /
• pp.1033-1042
• /
• 1994

Dynamic behavior of flexible rectangular liquid containers is analyzed by a two-dimensional coupled boundary element-finite element method. The irrotational motion of inviscid and incompressible ideal fluid is modeled by boundary elements and the motion of structure by finite elements. A singularity free integral formulation is employed for the implementation of boundary element method. Coupling is performed by using compatibility and equilibrium conditions along the interface between the fluid and structure. The fluid-structure interaction effects are reflected into the coupled equation of motion as added fluid mass matrix and sloshing stiffness matrix. By solving the eigen-problem for the coupled equation of motion, natural frequencies and mode shapes of coupled system are obtained. The free surface sloshing motion and hydrodynamic pressure developed in a flexible rectangular container due to horizontal and vertical ground motions are computed in time domain.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.6
• /
• pp.383-389
• /
• 2016

Based on a surface design with rectangular cavities and channels, we investigated the effects of gravity and capillary pressure on pool-boiling Critical Heat Flux (CHF). The microcavity structures could prevent liquid flow by the capillary pressure effect. In addition, the microchannel structures contributed to induce one-dimensional liquid flow on the boiling surface. The relationship between the CHF and capillary flow was clearly established. The driving potentials for the liquid supply into a boiling surface can be generated by the gravitational head and capillary pressure. Through an analysis of pool boiling and visualization data, we reveal that the liquid supplement to maintain the nucleate boiling condition on a boiling surface is closely related to the gravitational pressure head and capillary pressure effect.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.5
• /
• pp.257-264
• /
• 2016

In this study, experiments for measurements of entrainment rate of fluid mud were carried out using annular flume domestically for the first time. Six entrainment tests using kaolinite sediments were conducted with different initial concentrations of fluid mud. It is shown that sediment settling counteracts the otherwise buoyancy dependent entrainment of fluid mud, and that the settling effect leads to a measurably decreased entrainment rate at higher Richardson numbers in comparison with entrainment of salt water, due to additional dissipation of turbulent kinetic energy in the interfacial layer. Through the comparison with previous other studies, the overall performance of the annular flume, the experimental procedure and the test results in simulating the entrainment of fluid mud are shown to be good enough to verify.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.2
• /
• pp.63-72
• /
• 2011

Since the detection probability is critically dependent on the target strength (TS) in active sonar and on the radiated noise level (RNL) in passive sonar, the acoustic materials for echo reduction (ER) and transmission loss (TL) are widely used for the stealth of underwater targets. In this paper, a measurement system based on the small water tank, for the frequency range of greater than 30 kHz, is developed and verified using reference targets. In order to design the water tank and the geometry of test samples, a program is developed to calculate the arrival time of interfering signals due to the reflection from water tank walls and also due to the diffraction from the edge of the test samples. Considering all the interfering signals, an optimal experimental configuration for water tank and test samples is designed and used throughout the experiment. Next, the signal processing algorithms to estimate ER and TL are developed based on the measured propagation loss reflecting the geometric spreading characteristics of the transducer. Finally, a set of reference targets such as aluminium plate and perfectly reflecting plate are used in a small water tank to verify the developed measurement system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.552-552
• /
• 2017

본래 식용으로 들여온 외래어종은 우리나라 하천에서 토착 어류의 생태계를 교란시키며, 빠르게 서식처를 확산하고 있다. 일반적으로 알려져 있는 외래어종인 배스와 블루길 이외에도 무지개 송어 및 향어도 외래어종으로 분류된다. 본 연구는 외래어종 중 배스와 블루길을 대상으로 여러 환경적 요인에 따른 서식처 형성을 관찰하고 외래어종의 생태활동 변화를 분석하는 것을 목적으로 수행하였다. 여러 연구에 따르면 수온과 용존산소가 담수 어류의 서식환경 구축을 결정하는 매우 중요한 인자임을 알 수 있다. 이에 따라, 외래어종의 서식처 형성에 영향을 미치는 여러 환경적 요인 중 수온을 주요 인자로 선정하여 실험실 실험을 수행하였다. 연구를 수행하기 위해 하천 및 농업용 저수지로부터 배스와 블루길을 채집하였다. 채집된 외래어종을 길이 12 m, 깊이 0.6 m, 폭 1 m의 하천과 유사한 자연적 환경이 갖추어진 수조에 이식하였다. 수조 내 환경은 독립변인인 수온을 제외하고 모두 동일하게 구성하였다. 수조를 3개의 구역으로 구분하여 양 끝단에 냉수대와 온수대를 조성하였으며, 중간부의 평균 수온대를 기준으로 냉수대와 온수대의 수온 차는 약 $1^{\circ}C$이상 유지되도록 설정하였다. 현재까지의 실험 결과에 따르면, 외래어종은 온수대에 서식처를 형성하였다. $1^{\circ}C$의 수온 차에도 매우 민감하게 반응하며, 냉수대에는 서식처를 형성하지 않는 것 또한 확인되었다. 이를 통해 수온이 외래어종의 서식처 형성에 매우 중요한 영향을 미치는 요인인 것으로 판단된다. 연구 과정에서 추가적으로, 먹이 금붕어가 부재할 경우 동종 어식을 하는 것이 관찰되었다. 수조 내 수온에 따른 구역의 구분을 위해 공통으로 설치된 가림판 부근에 외래어종의 군락이 형성된 것을 통해, 향후에는 외래어종의 서식처 형성과 장애물과 같은 지형적인 요인이 미치는 영향에 관한 연구가 필요할 것으로 판단된다. 춘계는 수온의 증가로 외래어종이 더욱 왕성한 활동을 하는 시기이다. 수온이 외래어종의 서식처 형성에 지배적인 영향을 미치는 것이 실험을 통해 확인하였으나, 수온에 대한 민감도에 관한 연구 또한 필요하다. 더불어 외래어종의 계절에 따른 먹이활동 및 생장량 또한 지속적으로 관찰할 것이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.294-294
• /
• 2023

보나 댐에 설치된 배수관이나 지하에 매설된 상하수도관과 같이 물을 운반하기 위한 관로 뿐만 아니라 유류를 운송하는 관, LPG와 같은 기체를 운송하는 관처럼 유체를 운송할 때 다양한 관로를 사용한다. 그 중 사용범위나 제작에 대한 용이성 등에 의해서 원형관이 주로 사용된다. 따라서 위와 같은 원형관 내의 관수로 흐름분포에 대한 연구는 아주 중요하며 필요하다. 원형관 내 흐름분포는 관에 연결된 펌프 혹은 수조나 저수지의 수위에 의한 관내 압력에 의해 지배되어지며, 관 내부 표면의 거칠기나 관의 꺾인 정도 등 다양한 요인에 영향을 받는다. 본 연구에서는 일반적인 실험결과를 도출하기 위하여 직선의 원형관을 대상으로 실험과 수치모의를 동시에 수행한다. 실험은 높이 3m, 길이 4.5m, 폭 1.5m 수조의 바닥에서부터 0.45m 위에 위치한 1.8m 길이의 아크릴 재질의 원형관이 설치된 수조에서 진행되었으며, 수치모의 또한 동일한 규모에서 수행되었다. 수조의 수위를 변화시켜 여러가지 레이놀즈 수에 따른 관 내 흐름의 변화에 대하여 분석하는 것이 목적이며, 실험결과와 수치모의 계산결과 간의 비교검증을 통해 분석한다. 이 연구에서는 난류의 영향을 RANS(Reynolds-averaged Navier-Stokes)와 LES(large eddy simulation)을 혼합한 형태인 Hybrid RANS/LES 모형 중 하나인 DES(detacged-eddy simulation)기법을 이용하여 해석함으로써, 빠른 유속으로 인한 관 내의 강한 와(eddy)에 대한 효과를 예측하는데 한계가 있는 RANS 모형과 벽면근처에서의 흐름 해석을 위해 굉장히 높은 격자해상도가 요구되어 계산적 비용 측면에서 효율이 떨어지는 LES 모형의 한계를 극복하고자 한다. DES 모형은 벽에서 떨어진 와에 대하여 LES로 직접해석하고, 벽 근처에서의 흐름에 대해선 난류모형을 통해 모델링함으로써 벽 근처 계산격자와 계산량을 줄이면서 LES와 비슷한 결과를 얻을 수 있다. 실험결과와 수치모의 계산결과 사이의 비교검증을 통하여 관 내 흐름에 대한 수치모의의 적용성을 평가하고 실험에서 측정하기 어려운 난류강도와 압력변동의 상세한 특성을 수치모의를 통해 분석함으로서 관 내 흐름특성에 대하여 자세히 분석하였다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.11 no.4
• /
• pp.233-238
• /
• 1978

Rainbow trout were reared in a stainless steel aquarium from Nov. 11, 1977 to June 12, 1978, and the following results were obtained : 1. The volume of water was about $400\iota$ in a aquarium measuring $1m\;(Length)\times1m\;(Width)\times67cm(Height)$ and water depth 40 cm. Water was supplied for about 16 hours daily at a rate $3\iota/min$ and was drained through the conical settling part in the middle of the aquarium bottom. Filter tank was about $23cm(W)\times23cm(L)\times40cm(D)$ and contained pebbles 30 cm in depth. Water recirculation rate was at)out $1,030\iota/hr$, or 2.6 turn-over per hour. 2. During the first period (77 days), the trout grew from 88.3g to 229g in average, the total weight attaining 30.7kg. The food coefficient was 1.249, average daily increment 243.3g, average daily growth rate 1.245%, and the mortality was 2 smallest fish weighing 53 g, owing to unknown reason. During the second period (135 days), the trout grew from 239g to 555g in average, the total weight attaining 57.2 kg. The food coefficient was 1.447, average daily increment 279.8g, average daily growth rate $0.65\%$ and the mortality was 31 fish weighing 11,255 g, owing partly to miss-handling and partly to disease. 3. The feed consisting of fully domestic materials was prepared in this laboratory, and the feed conversion was not inferior to high protein commercial feed available in foreign countries. 4. The result of whole period for 212 days was 56.5 kg in gross increment, and based on this result, when $1\iota/min$ full day inflowing water available, the net production will become 28.25 kg. So, if a 5000kg production is planned, $180\iota/min$ or about $10.8m^3/hr$ be reauired, and the production in value frill become 15million won at local price at the expense of about 5.3 million won. From the result of this experiment, rainbow trout is feasible for commercial production in Korea with relatively small amount of well water and simplified water recirculation system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.745-753
• /
• 2010

Many studies using RFID which can identify the movement of targeted objects has been conducted actively. In this paper, we propose improved tagging method to check exactly the amount of fish feed by the aquaculture tank in a land-based aquaculture farm and design the RFID feeding system to perform auto feeding history. Also, we implement the prototype system which it includes development program for auto-identification and auto-recording and self-made RFID feeding cart equipped the weight device, RFID reader, control module and display device.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.6
• /
• pp.623-630
• /
• 2013

This study was to evaluate hydrodynamic performance evaluation between an abroad product, a developed inflatable kayak and new developed kayaks. In order to test, inclining and turning trial test were carried out in the Ocean engineering Basin. Also, resistance test was carried out using a reduced scale model in the circulating water channel. In conclusion, stability of KONA was evaluated was the most greatest, the coefficient of resistance and center of gravity from RD-FK-12 were considerable, and turning performance of RD-FK-11 was greater than this of KONA and RD-FK-12.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.11 no.1
• /
• pp.5-8
• /
• 1978

Numerical changes of coliform bacteria in a recirculating aquarium were measured as fouling indicator. The contamination of the filter bed was mainly due to the food given to fishes, the fecal materials and the additional supply of water polluted already. Abundance of the bacteria in the aquarium was controlled by the physiochemical factors of water quality. Of these factors, pH was the main factor. Under the water temperature $20^{\circ}C$, if pH was controlled at lower than $5\~6$, the bacteria did not flourish seriously. Under the water temperature over $30^{\circ}C$, the bacterial growth was markedly decreased regardless of the pH value, and the bacterial flora seemed to be active in growth under temperature condition lower than $30^{\circ}C$.