• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.111-116
• /
• 2008

Since the hydraulic fracturing field testing method was introduced first to Korean geotechnical engineers in 1994, there have been lots of progresses in a hardware system as well as an interpretation tool. The hydrofracturing system of first generation was the pipe-line type, and it has been developed to a wire-line system at their second generation. The current up-to-date system is more compact and is able to be operated by all-in-one system. With a progress in a hardware system, the software for analyzing in-situ stress regime has also been progressed. The shut-in pressure, which is the most ambiguous parameter to be obtained from hydrofracturing pressure curves, can now be acquired automatically from the various methods. While the hardware and software for hydrofracturing tests are being developed during the last decade, the author could accumulate the field test results which can cover the almost whole area of South Korea. Currently these field data are used widely in a feasibility study or a preliminary design step for tunnel construction in Korea. Regarding the difficulties in a site selection and a test performance for the in-situ stress measurement at an off-shore area, the in-situ stress regime obtained from the field experiences in the land area can be used indirectly for the design of a sub-sea tunnel. From the hydrofracturing stress measurements, the trend of magnitude and direction of in-situ stress field was shown identically with the geological information in Korea.

• Clean Technology
• /
• v.25 no.4
• /
• pp.289-295
• /
• 2019

Though the usage of vinyls and plastics produced from fossil fuels has been increasing in the world, the eco-friendly domestic disposal or recycling of waste vinyls has to be executed because the migration or importation of waste vinyls or waste plastics are globally prohibited. Even though the eco-friendly domestic disposal or recycling of waste vinyls and waste plastics should be developed, promising eco-friendly recycling methods are few because there are extraneous substances in waste vinyls and waste plastics. Also, conventional incineration and landfill methods result in secondary contamination and then increase disposal costs. Therefore, the selective elimination of extraneous substances or other materials included in waste vinyls and waste plastics could make valuable recycling or reuse possible. In particular, the novel hybrid process in which crushing and screening are simultaneously conducted in a rotary kiln type reactor can domestically maximize the material recycling or reuse. In this study, the feasibility study for a crushing/screening hybrid process developed in Korea was performed and evaluated in case of thermal recycling (TR) and material recycling (MR). The effect of various subsidies on economic efficiency was especially evaluated by means of domestic recycling plans. The incentive revenues from waste vinyl recycling and the incineration share of waste vinyls affected the net present values and internal rate of returns of the hybrid process.

• Journal of Korean Society of Forest Science
• /
• v.98 no.4
• /
• pp.426-434
• /
• 2009

This study was carried out to derive the most optimal production process for the wood fuels(chip and pellet), by collecting cost data on each procedure through the life cycle assessment approach, and to compare between the profitability and efficiency, from the view points of producers and consumers, irrespectively. The costs accounted in this analysis were based on the opportunity cost. The results show that wood chips are cheaper than wood pellets in production costs. In respect to the process with the lowest production cost, while wood chips should be to crush collected residues into pieces on the spot for merchandizing, wood pellets need to be transported to manufactory for pelletizing. The study findings also include that the profits, which is estimated by subtracting expenses from gained sale revenue, were a bit higher for wood chips than wood pellets. Additionally, the price ratio of wood pellets to wood chips for getting the same caloric value appears to be 1.27. Despite of economic benefits of processing wood chips, there are several problems in practice. For producers, there is a possible increase in not only transportation cost for conveying crushers to the dispersed places, but storage cost due to the lack of the marketplaces in the immediate surroundings. For consumers, on the other hand, there are some challenging issues, such as bulky storage facility requirement, additional labor for fuel supplement, frequent ashes disposal, and decomposition in summer and freezing in winter caused by wood chips' own moisture.

• Resources Recycling
• /
• v.9 no.2
• /
• pp.3-10
• /
• 2000

Used aluminum beverage can(UBC) is an important secondary resource. Domestic recycling rate of UBC should be increased from the standpoint of resource savings and environmental protection. Aluminum can to can recycling is divided into two steps. The first step was composed of the processes such as collection of used beverage cans, shredding, magnetic separation, de-lacquring, melting and casting. The second is remelting and casting, heat treatment, hot and cold rolling, annealing, and can making. With brief discussion about this recycling technology, this article covers aluminum can consumption, the present state of aluminum can recycling in Korea, Japan, USA, and Europe.

• Journal of the Korean Ceramic Society
• /
• v.41 no.3
• /
• pp.221-228
• /
• 2004

Basic properties of artificial lightweight aggregate by using waste dusts and strength properties of LWA concrete were studied. Bulk specific gravity and water absorption of artificial lightweight aggregates varied from 1.4 to 1.7 and 13 to 16%, respectively. Crushing ratio of artificial lightweight aggregate was above 10% higher than that of crushed stone or gravel. As a result of TCLP leaching test, the leaching amount of tested heavy metal element was below the leaching standard of hazardous material. Slump, compressive strength and stress-strain properties of LWA concrete made of artificial lightweight aggregate were tested. Concrete samples derived from LWA substitution ratio of 30 vol% and W/C ratio of 45 wt% showed the best properties overall. Thermal insulation and sound insulation characteristics of light weight concrete panel with the optimum concrete proportion were tested. Average overall heat transmission of 3.293W/㎡$^{\circ}C$ was observed. It was higher by about 15% than those of normal concrete made by crushed stone. Sound transmission loss of 50.9 ㏈ in frequency of 500 ㎐ was observed. It was higher by about 13% than standard transmission loss.

• Food Science and Preservation
• /
• v.6 no.2
• /
• pp.167-172
• /
• 1999

The noodle making characteristics were investigated for both eleven varities of Korean wheat, such as Chokwangmil, Geurumil, Eunpamil, Tnpdongmil, Woorimil, Oigeurmil, Alchanmil, Cobunmil, Geumgangmil, Seodunmil and Suwon 265, and two varieties of imported wheat, DNS(Dark Northern Spring Wheat) and ASW(Australian Standard White). After cooking of dry-noodle, the elasticities were 0.59-0.79 in the native wheat and 0.55-0.57 in the imported wheat. Among the varieties showing the highest value in the various texture properties of cooked dry-noodle, Alchanmil was highest in gumminess, Geungangmil in cohesiveness, Olgeurumil in adhesiveness, Geurumil in fimmess, Chokwang in chewiness, Tapdongmil in tensile strength Gobunmil in breaking strength. After cooking the wet-noodle, Tapdongmil in elasticity, Geurumil in adhesiveness, Geumgangmil in gumminess, cohesiveness, firmness and chewiness, and Suwon 265 in tensile strength showed the highest values in the respective textural properties. From the sensory evaluation of the cooked dry-noodle, the significant differences (p<0.05) among wheat varieties were observed in color, texture and overall quality. As a result, ASW was excellent in our all qualities of cooked dry-noodle followed by Tapdongmil, Alchanmil and Geumgangmil. The cooked wet-noodle also showed the high sensory scores (p<0.01) were showing the best in Tapdongmil, followed by Eunpamil, Geumgangmil and Woorimil.

• Resources Recycling
• /
• v.23 no.2
• /
• pp.26-36
• /
• 2014

The materials flow of copper can be analyzed into up-stream and down-stream stages based on the literature survey. Discharge and recycling stages in the down-stream have been particularly analyzed through the field survey. The waste nickel resources circulation flow may conveniently be grouped into 4 stages discharge import, collection disuse, resource recovery and product production export, the resources mainly consist of copper scrap and stainless steel scrap in 2010. The resource circulation rate of 36.83% is obtained from the above flow. Various plans are therefore, suggested in each stage to increase resource circulation rate. At discharge import stage, it is suggested to consider this kind of waste as an important resources if it is appropriately classified in detail, basides applying quota tariff to this kind of waste. At collection disuse stage, the plan of stabilizing supply and demand is suggested through the improvement of bidding system. Resources professional cycling stage crushing and grinding companies foster coexistence between large and small plans and strategies were suggested. At product production export stage, the integrated approval is suggested approval for licensing to register units as waste-treating facilities instead of exempting registration under the present condition to activate recycling industries.

• Journal of Life Science
• /
• v.32 no.8
• /
• pp.641-646
• /
• 2022

There are concerns about the environmental release of living modified organism (LMO) maize created to increase yields. In fact, there are cases in which LMO crops for feed have been leaked in Korea to form autoite colonies, and concerns about LMO spill are intensifying. In this study, the possibility of environmental outflow and occurrence of native organisms was analyzed using maize feed and seeds distributed in Korea. In the evaluation of the possibility of spontaneous occurrence of maize in the event of an unintentional release of maize feed made by crushing maize, the incidence rate of maize was 0.01%, which was extremely low compared to the germination rate of maize seeds. A survey of the dormant rate of maize showed that all maize seeds collected every month were dead. In the germination rate test by temperature using Daehak wax corn and Kwangpyeongok, high germination rates were found at 20℃ and 30℃, and relatively low germination rates were found at 10℃ and 40℃. In addition, all germination tests showed a higher germination rate Daehak wax corn than Kwangpyeongok. The difference between domestic and overseas cultivation maize was confirmed through a survey on the agricultural properties of three varieties of maize. The data obtained through this experiment could be the basis for the evaluation of the weediness potential of environmental risk assessment and technology to suppress the occurrence of autoite in preparation for future LMO spills.

• Resources Recycling
• /
• v.14 no.3
• /
• pp.6-15
• /
• 2005

The overall area of Taiwan is 36,006 km$^2$ and population was about 22,535,000 persons in 2003. The population density became 625persons/km$^2$. The economic of Taiwan progress since 1970. Gross national production in 2004 increased by 2.3 trillion or 493% relative to 1981. The number of automobiles in 1981 was 821,862, and increase to 6,389,186 in 2004. The number of motorcycles in 1981 were 4,591,547 and increase to 12,793,950 in 2004. The vehicle growth rate of automobile and motorcycle was 677% and 178% respectively. The recycling end-of-life vehicles(ELVs) is specified in the Waste Disposal Act. Its main content is the system of asking the vehicle manufacturer and importing agents, who are responsible for recycling of the ELVs. The recycling task on ELVs was startedinitially in 1993. It is required that the manufacturers and importing agents deposit certain ratios of Waste Vehicle Disposal Fees proportional to the number of vehicle they manufacture and import into Taiwan under sales. This report will introduce the current status of ELVs recycling in Taiwan, and the future direction, as well as measures proceeding for the EPA- Fund Management Committee(RMFC) operating in the fiture.