• Title/Summary/Keyword: 수의 읽기 쓰기

Search Result 204, Processing Time 0.029 seconds

A Study on Effective Ways for Improving English Listening Ability (효과적인 영어 듣기 실력 향상을 위한 방안 연구)

  • 박창옥
    • Journal of the Korea Society of Computer and Information
    • /
    • v.5 no.2
    • /
    • pp.165-172
    • /
    • 2000
  • This study was focused on finding an effective way for improving English listening ability of students. who are majoring in Office Automation at Dong Seoul College, In order to achieve the best method, the study was to investigate the theories and the teaching techniques of listening comprehension approach. In this regard, Toeic tests were conducted. and the results were analized. This study suggests that various listening experiences should be given to the students to achieve the ultimate goal of listening comprehension for communication.

  • PDF

SSD 테스트 범위의 극대화 방안

  • Hong, Seong-Hui
    • The Magazine of the IEIE
    • /
    • v.37 no.3
    • /
    • pp.43-50
    • /
    • 2010
  • Solid State Drive(SSD)는 NAND Flash Memory와 이틀 제어하는 Controller로 구성되는 차세대 대용량 저장매체로써 기존의 HDD에 비해 상대적으로 읽기 및 쓰기가 빠르고,동작 중 전력소비가 적으며, 또한 발열이 낮고, 강한 내구성을 가지고 있기 때문에 PC에서 HDD보다 더 적합한 저장매체라 할 수 있다. 하지만, 가격이 비싸다는 점과 아직 안정성이 검증되지 않은 이유로 HDD를 대체하는데 시간이 더 필요하다. 안정성을 높이기 위해 많은 개발자들이 노력을 하고 있음에도 불구하고 공통적으로 겪는 문제점중에 하나가 바로 객관적인 성능 및 품질을 판단하는 테스트 기준이 없다는 것이다. 본 논문에서 다루고자 하는 내용은 기존 HDD 및 SSD 테스트의 한계침을 찾아보고 이를 보완한 테스트 기준을 제안함으로써, 많은 개발자들이 SSD 개발에 있어 좀 더 정확한 테스트로 SSD의 성능 및 안정성을 높이는데 가여할 수 있도록 SSD 테스트 관점에서의 Key word를 결론으로 제시하고자 한다.

  • PDF

NAND Flash Memory Management Using Spare Area (스페어 영역을 활용한 NAND 플래시 메모리 관리)

  • Lee Ok-Hee;Kim Jin-Ho;Cha Jae Hyuk
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2004.11a
    • /
    • pp.149-152
    • /
    • 2004
  • 플래시 메모리에서의 가비지 컬렉션은 유효하지 않은 데이타를 블록단위로 지우고 새로운 데이터를 할당할 수 있는 영역으로 만들어 주는 것을 의미하는데. 이것은 읽기/쓰기 작업에 비해 많은 시간을 요구하므로 빈번한 가비지 컬렉션은 시스템의 성능을 저하시킨다. 본 논문에서는 NAND 플래시 메모리에 데이타 베이스의 레코드 저장방식을 이용하여 데이타를 투플 단위로 저장하였고, 스페어 영역을 변경하여 이러한 작업이 편리하게 진행되도록 하였다. 가비지 컬렉션 시 투플의 크기에 따른 페이지 병합 작업 또한 스페어 영역의 정보를 이용하며, 이것은 실제 활용 가능한 페이지 수를 늘림으로써 가비지 컬렉션의 횟수를 줄이고 성능을 향상시킨다.

  • PDF

An Analysis of GNBD/VIA's Performance (GNBD/VIA의 성능 분석)

  • Kim, Kang-Ho;Kim, Jin-Soo;Jung, Sung-In
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2002.11a
    • /
    • pp.509-512
    • /
    • 2002
  • VIA 는 클러스터 또는 시스템 영역 네트워크를 위한 표준화된 사용자수준 통신 아키텍쳐이고, GNBD 는 LINUX 클러스터에서 IP 네트워크 설비를 기반으로 GFS 공유 파일 시스템을 설치할 때 사용하는 네트워크 블록 디바이스이다. GNBD 는 TCP/IP 상의 소켓을 기반으로 구현되어 있기 때문에, VIA 를 사용하는 클러스터이더라도 VIA 하드웨어 상에서 TCP/IP 소켓을 통하여 GNBD 를 작동시킨다. VIA 와 같이 물리적 연결이 신뢰성이 높고 높은 수준의 기능을 제공하는 경우는 같은 클러스터 안에서 TCP/IP 프로토콜 스택을 사용할 필요가 없다. 그래서 우리는 VIA 를 이용하지만 TCP/IP를 사용하지 않는 GNBD/VIA를 구현하였고, 동일한 VIA 하드웨어를 사용하면서 TCP/IP 모듈을 이용하는 GNBD 보다 파일시스템의 읽기(쓰기) 성능이 약 20%(30%) 향상된다는 것을 확인하였다. 본 논문에서는 VIA상에서 동작하는 GNBD/VIA의 성능 측정값과 그 위에 설치된 파일시스템의 을 보여주고, 그 결과를 상세히 분석하여 GNBD/VIA 상에 설치된 파일 시스템이 발휘할 수 있는 성능의 한계를 제시한다. 제시하는 한계치는 GNBD/VIA 뿐만 아니라 TCP/IP 상의 소켓을 사용하는 GNBD에도 적용할 수 있다.

  • PDF

Improving Access Performance of the Linux Cluster File System for Multimedia Service (멀티미디어 서비스를 위한 리눅스 클러스터 파일 시스템의 접근 성능 개선)

  • 홍재연;김형식
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2003.04a
    • /
    • pp.22-24
    • /
    • 2003
  • 클러스터 구조는 고가용성(high availability)과 결함내성(fault tolerance)을 만족하고 확장성이 뛰어나기 때문에 클러스터 파일 시스템은 멀티미디어 서비스에 적합하다. 사용자 수준 클러스터 파일 시스템[1, 2]은 멀티미디어 서비스에 특화된 기능을 제공하고 저장된 위치에 관계없이 파일이나 디렉토리에 접근할 수 있는 단일 시스템 이미지(single system image) 기술을 제공하지만 실제 저장된 위치에 따라 접근 시간의 편차가 발생한다. 본 논문에서는 메타 데이터 캐쉬와 시스템 버퍼를 이용한 사용자 수준 클러스터 파일 시스템의 성능 개선 방법을 제안하고 각각에 대하여 성능 개선 정도를 분석한다. 메타 데이터 캐쉬는 자주 참조되는 원격 노드의 메타 정보를 로컬 저장구조에 저장하고 시스템 버퍼는 데이터 블록의 쓰기 성능을 개선할 뿐만 아니라 선반입을 통하여 읽기 성능을 개선할 수 있다.

  • PDF

A Study on Korean alphabet and pronunciation correction for foreigner (외국인을 위한 발음 및 글씨 교정에 대한 연구)

  • Ha, YeoUi;Lim, Gyuhyoung;Kim, Munju;Kim, Myungho;Kim, Youngjong
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2019.05a
    • /
    • pp.564-565
    • /
    • 2019
  • 이 연구는 '한국어'를 학습하는 외국인들을 위한 어학프로그램을 제공한다. 쓰기, 읽기, 듣기 과정을 통해 편리하게 언어를 습득할 수 있고, 더 나아가 외국과 한국의 융합을 통해 다양한 다문화 사회를 이끌어 낼 수 있는 발판이 되어준다.

A Design of Superscalar Digital Signal Processor (다중 명령어 처리 DSP 설계)

  • Park, Sung-Wook
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.18 no.3
    • /
    • pp.323-328
    • /
    • 2008
  • This paper presents a Digital Signal Processor achieving high through-put for both decision intensive and computation intensive tasks. The proposed processor employees a multiplier, two ALU and load/store. Unit as operational units. Those four units are controlled and works parallel by superscalar control scheme, which is different from prior DSP architecture. The performance evaluation was done by implementing AC-3 decoding algorithm and 37.8% improvement was achieved. This study is valuable especially for the consumer electronics applications, which require very low cost.

Diminishing FTL Log Area Searching Cost Using the Counting Bloom Filter (카운팅 블룸 필터를 활용한 FTL 로그영역 탐색 비용 감소)

  • Kang, Woon-Hak;Lee, Sang-Won
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2009.11a
    • /
    • pp.71-72
    • /
    • 2009
  • 플래시 메모리은 많은 부분에서 기존의 저장장치인 HDD에 비해 좋은 성능을 지녔다. 하지만 HDD와는 달리 데이터의 덮어쓰기가 허용 되지 않는다. 이 문제를 해결하기 위해 플래시 메모리는 FTL(Flash Translation Layer)을 사용하고 있으며, FTL을 통해 기존의 저장장치와 동일하게 사용할 수 있다. FTL들 중 로그영역을 사용하여 성능을 개선한 것들이 많은데, 로그영역의 사용으로 인해 읽기/쓰기 작업시 반드시 로그영역을 탐색을 해야만 했다. 본 논문에서는 카운팅 블룸필터(Counting bloom filter)를 활용하여 불필요한 로그영역 탐색을 줄이는 기법을 제안하였고, 실험을 통해 로그영역에 최신 데이터가 없는 경우 탐색횟수를 크게 줄일 수 있는 것을 확인하였다.

Research on Conditional Execution Out-of-order Instruction Issue Microprocessor Using Register Renaming Method (레지스터 리네이밍 방법을 사용하는 조건부 실행 비순차적 명령어 이슈 마이크로프로세서에 관한 연구)

  • 최규백;김문경;홍인표;이용석
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.28 no.9A
    • /
    • pp.763-773
    • /
    • 2003
  • In this paper, we present a register renaming method for conditional execution out-of-order instruction issue microprocessors. Register renaming method reduces false data dependencies (write after read(WAR) and write after write(WAW)). To implement a conditional execution out-of-order instruction issue microprocessor using register renaming, we use a register file which includes both in-order state physical registers and look-ahead state physical registers to share all logical registers. And we design an in-order state indicator, a renaming state indicator, a physical register assigning indicator, a condition prediction buffer and a reorder buffer. As we utilize the above hardwares, we can do register renaming and trace the in-order state. In this paper, we present an improved register renaming method using smaller hardware resources than conventional register renaming method. And this method eliminates an associative lookup and provides a short recovery time.

Implementation of a System for RFID Education to be based on an EPC global Network Standard (EPC global Network 표준을 따르는 RFID 교육용 시스템의 구현)

  • Kim, Dae-Hee;Chung, Joong-Soo;Kim, Hyu-Chan;Jung, Kwang-Wook;Kim, Seog-Gyu
    • The Journal of the Korea Contents Association
    • /
    • v.9 no.11
    • /
    • pp.90-99
    • /
    • 2009
  • This paper presents the implementation of RFID EPC global network educational system based on using 900MHz air interface between the reader and the active tag. The software of reader and the active tag is developed on embedded environment, and the software of PC controlling the reader is based on window OS operated as the server. The ATmega128 VLSI chip is used for the processor of the reader and the active tag. As the development environment, AVR compiler is used for the reader and the active tag of which the programming language is C. The visual C++language of the visual studio on the PC activated as the server is used for development language. Main functions of this system are to control tag containing EPC global Data by PC through the reader, to obtain information of tag through the internet and to read/write data on tag memory. Finally the data written from the active tag's memory is sent to the PC via the reader as "read" operation and compare the received data with one already sent to the tag. Software implementation of 900MHz EPC global RFID educational system is done on the basis of these functions.