• Clean Technology
• /
• 제14권4호
• /
• pp.281-286
• /
• 2008

Absorption rate of carbon dioxide was measured in the aqueous polyacrylamide (PAA) solution containing triethanolamine (TEA) of $0{\sim}2.0\;kg\;mol/m^3$ in a flat-stirred vessel with an impeller of 0.05 m and agitation speed of 50 rpm at $25^{\circ}C$ and 101.3 kPa. The chemical absorption rate of $CO_2$ was estimated by mass transfer mechanism based on the film theory using the physicochemical properties containing the liquid-side mass transfer coefficient of $CO_2$ and the kinetics of reaction between $CO_2$ and TEA to compare with the measured rate. The aqueous PAA solution acted as a reducing agent by viscoelastic property of non-Newtonian liquid based on the same viscosity of the solution.

• Journal of the Korean Chemical Society
• /
• 제24권3호
• /
• pp.209-217
• /
• 1980

The relative viscosities and osmotic coefficients of solutions of urea, 1,3-dimethyl-urea(DMU), acetamide(AA), and propionamide (PA) in dimethylsulfoxide(DMSO), water, methanol, and in ethanol have been measured at 25 and $45^{\circ}$C by viscometry and osmometry. Viscosity increment in nonaqueous solutions decreased with increasing of the partial molal volumes of the solutes, but in aqueous solution the result was inversed. Viscosity increment of aqueous solution was smaller than that of aqueous DMU solution, but that of nonaqueous urea solution was larger than that of DMU. Amides, however, showed similar viscosity increment in any solvent.Osmotic coefficients of aqueous solution of urea were larger than those of DMU. In the nonaqueous solutions urea exhibited larger deviation from Raoult's law than DMU. The results indicated that urea molecules break water-structure in water, self-associate in DMSO, and showed larger solute-solvent interaction in alcohols than DMU. It can be also confirmed that amides break alcohol structure to a greater extent than any other solutes.

• Journal of the Korean Chemical Society
• /
• 제40권4호
• /
• pp.283-286
• /
• 1996

• Journal of the Korean institute of surface engineering
• /
• 제50권1호
• /
• pp.46-54
• /
• 2017

Marcel Pourbaix에 의해 만들어진 Eh-pH 도표는 화학적으로 안정한 상을 pH와 전위 (Potential or Eh)의 관점으로 도시한 것으로서 수용액 내에서 일어나는 화학반응을 부식-방식의 관점에서 이해하데 유용하게 사용되어 왔다. pH (potential of hydrogen)는 수소이온의 농도의 함수이며, Eh는 표준수소전극 (SHE, standard hydrogen electrode) 에 대한 전위를 나타낸다. 수용액에서의 도금 반응은 부식반응의 역반응이라 할 수 있으므로 도금반응도 이 도표를 이용하면 반응에 대한 열역학적 예측이 가능하다. 국내외 전기화학 및 표면공학 관련 교재들을 보면 Eh-pH 도표로 대표되는 열역학이나 분극곡선으로 대표되는 속도론에 대한 설명은 주로 부식의 관점에서 설명이 되어있어 도금을 공부하는 학생들에게는 직접적인 이해가 쉽지 않은 것이 사실이다. 저자는 출연연구소에 근무하면서 새로 들어오는 학연생(대학원생)들의 Eh-pH 도표에 대한 이해도를 알아보면 이 도표를 이해하고 이용할 줄 아는 학생이 거의 없다는 점을 안타깝게 여겨왔다. 최근에는 단순한 금속 도금이 아니라 나노 분말 합성, 반도체 물질 합성 등 여러 가지 공정기술과 응용기술이 수용액에서의 산화-환원 반응을 이용하고 있기 때문에 Eh-pH 도표의 중요성은 더해가고 있음을 느끼고 있었다. 그러던 중, 일본의 표면 처리 학술지인 표면기술(表面技術) (2013년, 64권 2호)에 'Eh-pH 도표의 표면기술에의 응용'이라는 제하의 소특집이 발간되었다. 이 소특집은 6편의 논문으로 되어 있었다. 저자는 이 소특집을 읽는 순간 이 논문들을 번역하여 표면공학회지에 소개를 하면 도금이나 전기화학을 공부하는 학생들에게 큰 도움이 될 것이라는 생각을 하였다. 본 기술해설 논문은 저자가 이 소특집에 게재된 논문을 번역하고 일부 내용은 저자의 의견으로 가감하여 표면공학회 학생 회원 및 기업의 연구원들에게 소개하기 위하여 저역을 한 것이다. 이 논문은 매 호 한편씩 소개할 예정이며, 원문을 읽고 싶다면 표면기술(表面技術)을 참조하길 바란다.

• Analytical Science and Technology
• /
• 제22권6호
• /
• pp.519-523
• /
• 2009

$^{129}I$ is especially one of the most harmful radioactive elements because of its long half-life ($t_{1/2}$=$1.7{\times}10^7$ yr). The efficient removal of iodide ($I^-$) and iodate (${IO_3}^-$) in a aqueous solution by adsorption using activated alumina and activated carbon was studied. The removal efficiency was over 99% for iodide ion with silver treated basic alumina and iodate ion with acidic alumina or silver treated acidic alumina without any chemical addition or physical treatments.

• Applied Chemistry for Engineering
• /
• 제32권1호
• /
• pp.20-27
• /
• 2021

Effects of the etching treatment of SAPO-34 catalyst were investigated to improve the catalytic lifetime in DTO reaction. The aqueous NH3 solution was a more appropriate treatment agent which could control the degree of etching progress, compared to that of using a strong acid (HCl) or alkali (NaOH) solution. Therefore, the effect on characteristics and lifetime of SAPO-34 catalyst was observed using the treatment concentration and time of aqueous NH3 solution as variables. As the treatment concentration or time of aqueous NH3 solution increased, the growth of erosion was proceeded from the center of SAPO-34 crystal plane, and the acid site concentration and strength gradually decreased. Meanwhile, it was found that external surface area and mesopore volume of SAPO-34 catalyst increased at appropriate treatment conditions. When the treatment concentration and time were 0.05 M and 3 h, respectively, the lifetime of the treated SAPO-34 catalyst was the longest, and was significantly enhanced by ca. 36% (based on DME conversion of > 90%) compared to that of using the untreated catalyst. The model for the etching progress of SAPO-34 catalyst in a mild treatment process using aqueous NH3 solution was also proposed.

• Journal of the Korean Chemical Society
• /
• 제54권4호
• /
• pp.479-486
• /
• 2010

The purposes of this study are to investigate the description of scientifically debatable carbonic acid in the Korean high school textbooks, characterize the physical properties of 'carbonic acid solutions' by using an MBL set-up and compare the properties with textual ones. Four different aqueous solutions of carbon dioxide have been prepared and analyzed: naturally aerated aqueous solution, dry ice-dissolving solution, $CO_2$-bubbling solution and commercial carbonic acid water. Experimental findings showed that pH and conductivity of these 4 solutions ranged from 3.85 to 5.66 and from 0.21 ${\mu}S$/cm to 272.1 ${\mu}S$/cm, respectively. Out of these solutions, the dissociation constant($K_{a1}$) of the bubbling solution at room temperature could be calculated to $5.7{\times}10^{-7}$ which value is comparable to the textual $4.3{\times}10^{-7}$ within experimental errors, which means that textual compound is not pure carbonic acid but the equilibrated mixture of carbonic acid and the aqueous solution of carbon dioxide. On the other hand, textual analysis showed that most of high school textbooks used carbonic acid as an example of weak acid and buffer solution of the blood but none of them distinguished the carbonic acid from the aqueous solution of carbon dioxide. Only one textbook, however, tiered two species in the chemical equation.

• Journal of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.185-191
• /
• 1989

Es wurden die Protonenspektren $wa{\beta}rigerH_2{^{17}}O$-haltige Erdalkalimetall-und Tetraalkylammoniumchlorid-Losungen bei $25^{\circ}$ und verschiededenen pH-Werten mit Hilfe der kernmagnetischen Resonanz-spektroskopie aufgenommen. Aus der Halbwertsbreite der Signale wurde die Austauschrate des Protons im Wassermolekul berechnet. Die Austauschrate, die in diesen Losungen beobachtet werden konnte, ist pH-abhangig. Bemerkernwerterweise ist die minimalle Austauschrate pH-abhangig. Dieses letztere Phanomen wird durch den Strukturbildungseffekt der Erdalkalimetallchloride und die hydrophobe Hydratation an Tetraalkylammoniumionen erklart.

• Applied Biological Chemistry
• /
• 제19권1호
• /
• pp.51-56
• /
• 1976

Chemical changes of dissolved $SO_2$ were followed in vitro system. Varying concentrations of sulfite solution reached similar Eh values 20 hours after preparation. No further increase of Eh values occurred in acidic solutions. Eh values were more greatly increased in neutral solutions than in alkaline solutions, and slightly higher in light than in dark. The decrease of measurable $SO_2$ content tended to be greater with increasing concentrations of sulfite, on exposure to light, and at higher pH values. A larger amount of hydrogen atoms was produced with higher concentrations of $SO_2$ and in neutral to alkaline solutions than in acidic solutions.

• Applied Chemistry for Engineering
• /
• 제9권5호
• /
• pp.786-790
• /
• 1998

K-GIC of the new carbon electrode to improve performance of carbon negative electrode in lithium ion secondary battery was prepated and its electrical characteristics were studied. Form this study, intercalated K quantity was increased in order of $2>3>1mole/{\ell}$ of KCl solution. And, for KCl solution of 1mole, the mole ratio of carbon and potassium was 156~388 carbon/potassium. The proper condition of K-GIC preparation was KCl solution of $1mole/{\ell}$, reaction temperature of $700^{\circ}C$, reaction time of 1 hour. From this condition, the intercalation and deintercalation behavior of lithium was very excellent. Also the reversibility was excellent.