• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.4
• /
• pp.25-38
• /
• 2020

For the purpose of recording Folk House Garden, this study was to review the historical value, location, space composition, Placememnt of the Building, garden composition, and management status of Folk House Garden designated as a cultural asset in Jeolla-do and to promote continuous maintenance and preservation in the future and enhance its value. The results of the study are as follows. First, most of them have been influenced by the trend of the times, such as the creation of a modern private garden and the spread of agricultural and commercial development through the garden components influenced by the royal, Japanese, and Western styles. Second, there are differences in the spatial composition of private households and the way they handle sponsorship, depending on the geographical location. When the geographical features were divided into flat and sloping areas, private houses located on flat land were divided into walls, walls were placed around the support area, and flower systems and stone blocks were created. The private houses located on the slope were divided into two to three tiers of space, and the wooden plant, flower bed, and stone bed were naturally connected to the background forest without creating a wall at the rear hill. Third, the size of the house and the elements of the garden have been partially destroyed, damaged, and changed, and if there is a lack of records of the change process, there is a limit to the drawing floor plan. There were many buildings and garden components that were lost or damaged due to changes in the trend and demand of the times, and some of them without records had to rely on the memory of owners and managers. Fourth, the species in Warm Temperate Zone, which reflects the climatic characteristics of Jeolla-do, was produced, and many of the exotic species, not traditional ones, were introduced. Fifth, fine-grained tree management standards are needed to prepare for changes in spatial function and plant species considering modern convenience.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.3
• /
• pp.155-165
• /
• 2021

The measures to extend local education autonomy are as follows: First, it is necessary to correct the confusion of the legal system of the local education autonomy system. For this, Article 12, Paragraph 2 and 4 of the 「Special Act on Local Autonomy and Decentralization, and Restructuring of Local Administrative Systems」 which state that "The State shall endeavor to consolidate systems for autonomy in education and local government" and "The implementation of autonomy in education and the autonomous police system shall be prescribed separately by Acts" should be deleted. Second, it is necessary to clarify unnecessary legal matters and regulatory measures for unification at the national level and to proactively consider the introduction of the legal trust system, in which education affairs are designated as local governments' own work and the state carries out specific affairs. The decentralization of local education finance is a key factor for the development of local education autonomy, and it requires the transfer of authority and resources to the region, and the enhancement of local autonomy and corresponding responsibility. First, the ratio of special grants must be adjusted further (from 3% to 2%) or the ratio of national policy projects must be lowered. Second, the provision that requires a consultation with a mayor/governor when making a budget covered by transfers from general accounts should be deleted. Third, it is necessary to remove the elements that limit the authority of city and provincial councils. Fourth, it is necessary to integrate the national education tax and the local education tax to create the education autonomy tax (tentative name) for only one independent purpose. Fifth, it is necessary to strengthen the distribution of the total amount of grants and abolish the settlement regulations for the measurement items of standard financial demand. Sixth is the expansion of the participation of stakeholders and experts in the grant distribution process. Seventh, it is necessary to establish a long-term employment system by designating the education finance field as a special field. Eight is the expansion of cooperative governance.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.12-28
• /
• 2021

Based on the global smart city promotion trend, in 2018, the "Fourth Industrial Revolution Committee" selected "sustainability" and "people-centered" as keywords in relation to the direction of domestic smart city policy. Accordingly, the Living Lab program, which is an active citizen-centered innovation methodology, is applied to each stage of the domestic smart city construction project. Through the Living Lab program, and in collaboration with the public and experts, the smart city discovers local issues as it focuses on citizens, devises solutions to sustainable urban problems, and formulates a regional development plan that reflects the needs of citizens. However, compared to citizen participation in urban regeneration projects that have been operated for a relatively long time, participation in smart city projects was found to significantly differ in level and sustainability. Therefore, this study conducted a comparative analysis of the characteristics of citizen participation at each stage of an urban regeneration project and, based on Arnstein's "Participation Ladder" model, examined the level of citizen participation activities in the Living Lab program carried out in a smart city commercial area from 2018 to 2019. The results indicated that citizen participation activities in the Living Lab conducted in the smart city project had a great influence on selecting smart city services, which fit the needs of local residents, and on determining the technological level of services appropriate to the region based on a relatively high level of authority, such as selection of smart city services or composition of solutions. However, most of the citizen participation activities were halted after the project's completion due to the one-off recruitment of citizen participation groups for the smart city construction project only. On the other hand, citizens' participation activities in the field of urban regeneration were focused on local communities, and continuous operation and management measures were being drawn from the project planning stage to the operation stage after the project was completed. This study presented a plan to revitalize citizen participation for the realization of a more sustainable smart city through a comparison of the characteristics and an examination of the level of citizen participation in such urban regeneration and smart city projects.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.20 no.2
• /
• pp.1-10
• /
• 2021

The results of research and analysis are as follows: First, there were 108 types of change patterns in the number of elementary school students. Second, based on the similarity of 108 types of change patterns in the number of students, a type system diagram was presented. Third, in the case of a total of 18 types of change patterns in the number of students, the number of students decreased significantly due to the establishment of additional schools on top of the existing schools. The result of a a long-term survey and analysis on the trend of increase and decrease in the number of students across the country shows an urgent need todevelop policy tasks across the entire school accommodation plan, such as the establishment of differentiated schools suitable for regional characteristics, relocation, consolidation, reorganization of school districts, remodeling, and appropriatization projects.

• Clean Technology
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2021

Due to the negative impacts of microplastics (MPs) on the ecosystem, the investigation of its occurrence and its treatment from sewage and wastewater treatment plants (WWTPs) have received a lot of attention in the recent years. Most MPs are precipitated and removed with the sludge during the treatment process. Proper sludge management is immensely necessary to avoid MP exposure in the environment. However, the domestic research on this aspect is limited. This study reviews appropriate sludge management approaches to decrease environmental MP exposure. This can be achieved through investigating sludge generation and treatment, regulation laws and government policy trends with an emphasis on WWTPs. The ratio of sludge in sewage treatment plants has been observed to be highest in recycling followed by incineration and landfills. Recycling is the highest in fuel followed by construction materials and composting. For WWTPs, the highest ratio is in recycling followed by fuel and landfills, and recycling is confirmed in the following order: incineration > after composting > after solidification > earthworm breeding. Treatment approaches that can increase the exposure of MPs to the ecosystem are considered to be used in landfills and agricultural fields. However, this method is not appropriate given the insufficient capacity of domestic landfills and the sufficient supply of existing chemical and animal manure fertilizers. Instead, it would be rational in terms of environmental preservation to expand the use of fuel and energy in connection with the new and renewable energy policy, and to actively seek the use of sub-materials for construction materials. In order to secure the basic data for the effectiveness of future planning and revision of related laws, it is required to perform an in-depth investigation of the sludge supply and demand status along with the environmental and economic effects.

• Journal of Korea Water Resources Association
• /
• v.54 no.8
• /
• pp.577-587
• /
• 2021

Drought is generally considered to be a natural disaster caused by accumulated water shortages over a long period of time, taking months or years and slowly occurring. However, climate change has led to rapid changes in weather and environmental factors that directly affect agriculture, and extreme weather conditions have led to an increase in the frequency of rapidly developing droughts within weeks to months. This phenomenon is defined as 'Flash Drought', which is caused by an increase in surface temperature over a relatively short period of time and abnormally low and rapidly decreasing soil moisture. The detection and analysis of flash drought is essential because it has a significant impact on agriculture and natural ecosystems, and its impacts are associated with agricultural drought impacts. In South Korea, there is no clear definition of flash drought, so the purpose of this study is to identify and analyze its characteristics. In this study, flash drought detection condition was presented based on the satellite-derived drought index Evaporative Stress Index (ESI) from 2014 to 2018. ESI is used as an early warning indicator for rapidly-occurring flash drought a short period of time due to its similar relationship with reduced soil moisture content, lack of precipitation, increased evaporative demand due to low humidity, high temperature, and strong winds. The flash droughts were analyzed using hydrometeorological characteristics by comparing Standardized Precipitation Index (SPI), soil moisture, maximum temperature, relative humidity, wind speed, and precipitation. The correlation was analyzed based on the 8 weeks prior to the occurrence of the flash drought, and in most cases, a high correlation of 0.8(-0.8) or higher(lower) was expressed for ESI and SPI, soil moisture, and maximum temperature.

• Composites Research
• /
• v.34 no.3
• /
• pp.192-198
• /
• 2021

Due to enormous market growing of electric vehicles without combustion engine, reducing unwanted BSR (buzz, squeak, and rattle) noise is highly demanded for vehicle quality and performance. Particularly, innerbelt weatherstrips which not only block wind noise, rain, and dust from outside, but also reduce noise and vibration of door glass and vehicle are required to exhibit high damping properties for improved BSR performance of the vehicle. Thermoplastic elastomers (TPEs), which can be recycled and have lighter weight than thermoset elastomers, are receiving much attention for weatherstrip material, but TPEs exhibit low material damping and compression set causing frictional noise and vibration between the door glass and the weatherstrip. In this study, high damping EPDM (ethylene-propylene-diene monomer)/PP (polypropylene) thermoplastic vulcanizates (TPV) were investigated by varying EPDM/PP ratio and ENB (ethylidene norbornene) fraction in EPDM. Viscoelastic properties of TPV materials were characterized by assuming that the material damping is directly related to the viscoelasticity. The optimum material damping factor (tanδ peak 0.611) was achieved with low PP ratio (14 wt%) and high ENB fraction (8.9 wt%), which was increased by 140% compared to the reference (tanδ 0.254). The improved damping is believed due to high fraction of flexible EPDM chains and higher interfacial slippage area of EPDM particles generated by increasing ENB fraction in EPDM. The stick-slip test was conducted to characterize frictional noise and vibration of the TPV weatherstrip. With improved TPV material damping, the acceleration peak of frictional vibration decreased by about 57.9%. This finding can not only improve BSR performance of electric vehicles by designing material damping of weatherstrips but also contribute to various structural applications such as urban air mobility or aircrafts, which require lightweight and high damping properties.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.177-192
• /
• 2021

The Development Assistance Committee of the Organization for Economic Cooperation and Development discusses the reorganization of the five evaluation criteria of the Public Development Assistance Committee, which are used internationally, and the five evaluation criteria including adequacy, efficiency, effectiveness, impact, and sustainability when assessing public development assistance in 1991. This study is to derive alternatives by applying the evaluation criteria of the Development Assistance Committee of the Organization for Economic Cooperation and Development in the evaluation of the inclusive business program being implemented in Nepal since 2019. As a result of the study, the adequacy of Nepal's inclusive business program was consistent with continuous employment and job creation for vulnerable groups such as disabled and orphan women. Efficiency can be said to be efficient in that processes such as work order and work confirmation are made with an electronic management tool, and delivery of the result is transmitted online, saving time and cost compared to other industries. The effectiveness of this project can be said to be an effective program in that it provides high-quality jobs such as providing specialized computer graphics education for the vulnerable, such as disabled and orphan women in Nepal, and hiring graduates as employees. Sustainability is the point that KOICA's inclusive business program has enabled vulnerable groups in the existing fields of agriculture and manufacturing to engage in the computer graphics industry, and the scalability of movies, characters, education businesses, and role models in other countries.However, considering that the scale of public development assistance will continue to increase in the future, it is necessary to establish a systematic monitoring system and a recirculation system so that the project between the donor and recipient countries can continue.

• Journal of the Korean Society of Radiology
• /
• v.15 no.4
• /
• pp.463-472
• /
• 2021

Demand for examinations using transvaginal transducer with high frequencies is increasing to observe pelvic organs in gynecological ultrasound tests. However, the quality control of the replacement probe in clinical trials is not properly implemented and the evaluation criteria have not been established. Therefore, 58 transvaginal transducers and 20 convex transducers were applied to the ATS-539 ultrasound phantom for 20 ultrasound devices currently in clinical use to obtain their respective images and measure them quantitatively and qualitatively. For quantitative measurements, vertical measurement, horizontal measurement, and focal zone and qualitative measurements, dead zone, axial·lateral resolution, sensitivity, functional resolution, gray scale·dynamic range were performed. Quantitative statistical analysis showed significant differences between the two transducers in the lateral measurement and local area (p<0.05). qualitative comparative analysis showed differences in sensitivity and functional resolution. This occurs due to the difference in frequency between transducers and the transducer's injection geometry. Based on the above experiments, the tolerance for horizontal measurement is raised to 10% (±8 mm), the tolerance for sensitivity is observed up to 6 cm deep, which is 12 cm deep,which is the level of the third quartile (75%). The permissible range of functional resolution is up to 6 (12 cm), 6 (12 cm), 11 (11 cm), 9 (9 cm), 6 (6 cm) target, which is the level of the third quartile (75%). It is considered reasonable to adjust the depth of targets in gray scale·dynamic range to measure at a depth of 2 cm, which is 50% of the depth of 4 cm. As above, the criteria for evaluating the quality of transvaginal transducer for use in the past have been proposed and it is expected that this study will be used as a basic data for the production of phantom exclusively for transvaginal transducer in the future.

• Journal of Nutrition and Health
• /
• v.54 no.4
• /
• pp.398-411
• /
• 2021

Purpose: The objective of this study was to investigate food and nutrition information utilization practices of adults aged between 20 and 30 years to provide the basic data for developing customized content. Methods: Statistical analyses were performed using the SPSS program (ver. 24.0) for the 𝛘²-test, t-test, one-way analysis of variance, and Duncan's multiple range test. Results: Of the 570 subjects surveyed, 45.4% were men, 54.6% were women, 66.3% were in their 20s, 33.7% were in their 30s, 41.4% were single-person households, and 58.6% lived with their families. On average, 14.2% of televisions (TVs), 26.0% of personal computers (PCs), and 63.7% of smartphones were used for more than three hours per day. 30.9% of respondents searched for food and nutrition information more than once a week. 70.0% of the respondents had then applied the information in real life and 54.7% of the respondents said they would share information with others. Information retrieval rate was in the order of 'restaurant (64.8%)', 'diet (57.5%)', and 'food recipes (55.7%)'. Overall satisfaction with food and nutrition information averaged 3.33 on a five-point scale. Satisfaction score was in the order of 'enough description and easy to understand (3.43)', 'matching title and content (3.35)', and 'providing new and novel information (3.22)'. Satisfaction scores were significantly higher in the group that searched for information (p < 0.001), the group that used the retrieved information in real life (p < 0.001), and the group that conveyed this information to others (p < 0.001). Conclusion: To improve information user satisfaction, it is necessary to provide customized information that fits the characteristics of information users. For this purpose, it is necessary to continuously conduct surveys and satisfaction evaluations for each target group.