• Korean Journal of Construction Engineering and Management
• /
• v.8 no.1 s.35
• /
• pp.87-95
• /
• 2007

If construction process operate composing work team by judgment manager's experience, possibility that progress of construction process becomes as inefficient is much. But, If produce optimal proposal of resources allocation, construction cost and duration through simulation at work plan step, work schedule because do quantification efficient operate do on. When plan construction process in this research, resources allocation by change of work team operation change, resources cost loss, total cost, optimal proposal of construction duration tentative plan of numerical formula model that can do simulation propose. Apply and revealed to apartment house framework which horizontal work area of process and vertical work area are composed as is each different construction process to verify proposed numerical formula model. Achieved efficiency than work team's operation results which apply numerical formula model that is presented in this research and enforce simulation is applied in actuality example construction.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.479-487
• /
• 2023

Recently, the destructive power of typhoons is continuously increasing owing to global warming. In a situation where the installation of floating wind turbines is increasing worldwide, concerns about the huge loss and collapse of floating offshore wind turbines owing to strong typhoons are deepening. A new type of disconnectable mooring system must be developed for the safe operation of floating offshore wind turbines. A new submersible mooring pulley considered in this study is devised to more easily attach or detach the floating of shore wind turbine with mooring lines compared with other disconnectable mooring apparatuses. To investigate the structural safety of the initial design of submersible mooring pulley that can be applied to an 8MW-class floating type offshore wind turbine, scale-down structural models were developed using a 3-D printer and structural tests were performed on the models. For the structural tests of the scale-down models, tensile specimens of acrylonitrile butadiene styrene material that was used in the 3-D printing were prepared, and the material properties were evaluated by conducting the tensile tests. The finite element analysis (FEA) of submersible mooring pulley was performed by applying the material properties obtained from the tensile tests and the same load and boundary conditions as in the scale-down model structural tests. Through the FEA, the structural weak parts on the submersible mooring pulley were reviewed. The structural model tests were conducted considering the main load conditions of submersible mooring pulley, and the FEA and test results were compared for the locations that exceeded the maximum tensile stress of the material. The results of the FEA and structural model tests indicated that the connection structure of the body and the wheel was weak in operating conditions and that of the body and the chain stopper was weak in mooring conditions. The results of this study enabled to experimentally verify the structural safety of the initial design of submersible mooring pulley. The study results can be usefully used to improve the structural strength of submersible mooring pulley in a detailed design stage.

• Journal of Bio-Environment Control
• /
• v.8 no.3
• /
• pp.152-163
• /
• 1999

It is required to analyze the controlled response of air temperature in greenhouse according to control techniques for precise control. In this study, a mathematical model was established for air heating of greenhouse with hot-water heating system The parameters of the model were decided by regression analysis using reference data measured at the greenhouse being heated In the simulation for the digital control of air temperature in the greenhouse, the mathematical model to evaluate the control performances was used. Tested control methods were ON-OFF contpol, p control, rl control and PID control. The mathematical model represented by inside air temperature ( T$_{i}$), hot-water temperature (T$_{w}$) in heating pipe and outside air temperature (T$_{o}$) was expressed as a following discrete time equation ; T$_{i}$($textsc{k}$＋1)＝ 0.851.T$_{i}$($textsc{k}$)＋0.055.T$_{w}$($textsc{k}$)＋0.094.T$_{o}$($textsc{k}$) Control simulations for various control methods showed the settling time, the overshoot and the steady state nor as follows; infinite time, 3.5$0^{\circ}C$, 3.5$0^{\circ}C$ for ON-OFF control : 30min 2.37$^{\circ}C$, 0.51$^{\circ}C$ for P control; 21min, 0.0$0^{\circ}C$, 0.23$^{\circ}C$ for PI control; 18min 0.0$0^{\circ}C$, 0.23$^{\circ}C$ for PID control, respectively. PI and PID controls appeared to be optimal control methods. There was no effect of differential gain on the heating process but much effect of integral gain on it.on it.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.3
• /
• pp.93-98
• /
• 1984

The paper presents an application of the Theory of Queue to a typical eath-haul operations. Field measurements of arrival and serve times were used to analyze the mathematical model for determination of optimal equipment requirements. Despite the model produces somewhat uder estimates of production, the use of the model in solving operation design problems was. found satisfactory on the practical basis.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.90-101
• /
• 1992

Some practical methods have already been proposed for predicting the characteristics of ship manoeuvring motions at relatively high advance speed. However, these methods can hardly be applied to motions of ships in starting, stoppint, backing and slow steaming conditions, even though such extensive motions are of vital importance from a safety point of view particularly in harbour areas. The method presented here aims at predicting the characteristics of ship manoeuvring at low advance speed, which covers starting, stopping, backing and slow steaming conditions. The force mathematical models at large angles of incidence to the hull as well as under the tilde range of propeller operations are formulated. Simulations of various manoeuvres at low advance speed are carried out for two types of merchant ship, i.e. a LNGC and a VLCC. Comparisons between simulations and corresponding full-scale measurements or free-running model tests provide a first verification of the proposed mathematical models.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.177-188
• /
• 1991

The littoral drift in the nearshore zone occurs mainly due to wave action and nearshore currents. Beach topotraphical evolution model presented in this study shows the possibility which can be applied to the prediction of beach deformation over short time interval, associated with the construction of coastal structures. The 3-dimensional beach evolution model, based on Watanabe's equation and Deguchi's flux model, is developed and consists of three submodels of wave transformation, rip-currents, and beach deformation. This model is applied to the several cases with different conditions and compared with the results of Watanabe's numerical model. In addition, the effects of parameters involved are discussed.

• Journal of Korean Society of Transportation
• /
• v.16 no.3
• /
• pp.123-136
• /
• 1998

본 연구에서는 일반균형이론을 이용하여 버스전용차로의 효과분석모형을 정립하였 고, 이 모형을 이용하여 경부고속도로의 버스 전용차로에 대한 효과분석을 수행하였다. 본 연구에서 제안된 버스전용차로 효과분석모형에 있어 수요모형으로는 로짓 모형을 사용하였 고, 서비스모형, 즉 공급모형으로는 지체함 수식을 사용하였다. 이를 통하여 버스전용차로 설치에 따른 교통수단간 전환수요를 내생화 하였다. 경부고속도로를 대상으로 한 사례분석 의 결과, 버스전용차로의 효과를 극대화하는 혼잡수준이 존재한다는 것과, 버스전용차를 설 치할 경우 교통수단간의 수요전이효과에 따라 버스뿐만 아니라 일반 차로를 이용하는 승용 차의 통행여건도 개선된다는 사실을 발견하였다.

• Korean journal of applied entomology
• /
• v.56 no.1
• /
• pp.1-18
• /
• 2017

Temperature-dependent development model is an essential component for forecasting models of insect pests as well as for insect population models. This study reviewed the nonlinear models which explain the relationship between temperature and development rate of insects. In the present study, the types of models were classified largely into empirical and biophysical model, and the groups were subdivided into subgroups according to the similarity of mathematical equations or the connection with original idea. Empirical models that apply analytical functions describing the suitable shape of development curve were subdivided into multiple subgroups as Stinner-based types, Logan-based types, performance models and Beta distribution types. Biophysical models based on enzyme kinetic reaction were grouped as monophyletic group leading to Eyring-model, SM-model, SS-mode, and SSI-model. Finally, we described the historical development and characteristics of non-linear development models and discussed the availability of models.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.11
• /
• pp.932-939
• /
• 2000

본 논문은 정적 CMOS 회로의 단락 전류로 인한 전력소모와 게이트의 전달 지연시간을 구하기 위한 간단한 방법을 제시한다. 단락전류식은 게이트와 드레인 사이에 존재하는 커플링 커패시턴스의 영사한 후 모형화한 전류 수식을 기반으로 CMOS 회로의 지연 시간을 예측하기 위한 거시모형과 수식들을 제안하였다. 제안된 방법은 시뮬레이션을 통하여 현재의 기술 동향 특성인 신호 천이시간과 부하 커패시턴스가 감소하는 경우에 대해 이전의 연구보다 더욱 정확하고 신속히 예측할 수 있음을 보였다. 또한 제안된 거시 모형은 전류식이 변할지라도 전력소모와 타이밍 수준에서의 지연시간을 계산하는데 쉽게 적용이 가능하다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.6
• /
• pp.459-464
• /
• 2013

In this paper, we introduce a modulation code design problem where best selection of two-dimensional codewords are determined to reduce two-dimensional (2D) intersymbol interference (ISI) and interpage interference (IPI). Codeword selection problem is formulated as a quadratic integer programming model that minimizes intra- and inter-symbol differences subject to uniform symbol usage and minimal Hamming distance violations. Second integer programming model detects the occurrence of isolated pixel pattern in the selected codewords. The proposed models are applied to 4-level and 2-level 6/8 codes.