• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.771-778
• /
• 2011

Preliminary feasibility study on Busan metro line #1 in Yangsan line (Nopo-Bukjeong) depending on active volume of mass transportation between Yangsan city and Busan city was conducted. As the study concluded that it's valid, the necessity to establish the metro railroad network connecting to Busan, Ulsan and Gyeongnam Province is demanded to improve the transportation issues in Ungsang area vulnerable to metro service and to drive the balanced development between metropolitan cities. In addition, the volume of transportation depending on methods in target areas and road traffic assignment are surveyed to put a stress on the necessity to establish the metro railroad network. As the demand of transportation for alternative lines is predicted, the budget and benefits for construction for each alternative line set for the rough economic analysis depending on traffic volume for each method and traffic assignment results. The total project budget necessary for construction of proposal line #1 set as effective one among target three lines in this project is calculated in 794.32 billion won. Construction accounts for the most expensive in expenses for project and contingency allowances, purchases for vehicles and collateral expense are followed in orders. However, compensation for lands is not counted. In particular, according to economic analysis in proposal #1, ratio of benefit/cost (B/C) is 0.584, net present value (NPV) is -217.47 billion won, the internal rate of return (IRR) is analyzed in 0.604 %. At the current stage, it is not economically feasible, but the B/C is 0.737 in long-term upon construction of Yangsan line between Wolpheong and Yongdang which is proposal line #3. Therefore, when Busan metro basic plan is reorganized to aim the benefit of residents in Ungsang area vulnerable to the metro service, we think it must be necessary to establish the metro railroad network connecting to Busan-Yangsan-Ulsan which is proposal line #2 by extending the existing Sinjeong line and including this task line in high-ranked plan related to metro railroad.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_1
• /
• pp.679-692
• /
• 2020

We coupled a CFD model to the WRF-Chem model (WRF-CFD model) and investigated the characteristics of flows and carbon monoxide (CO) distributions in a building-congested district. We validated the simulated results against the measured wind speeds, wind directions, and CO concentrations. The WRF-Chem model simulated the winds from southwesterly to southeasterly, overestimating the measured wind speeds. The statistical validation showed that the WRF-CFD model simulated the measured wind speeds more realistically than the WRF-Chem model. The WRF-Chem model significantly underestimated the measured CO concentrations, and the WRF-CFD model improved the CO concentration prediction. Based on the statistical validation results, the WRF-CFD model improved the performance in predicting the CO concentrations by taking complicatedly distributed buildings and mobiles sources of CO into account. At 04 KST on May 22, there was a downdraft around the AQMS, and airflow with a relatively low CO concentration was advected from the upper layer. Resultantly, the CO concentration was lower at the AQMS than the surrounding area. At 15 KST on May 22, there was an updraft around the AQMS. This resulted in a slightly higher CO concentration than the surroundings. The WRF-CFD model transported CO emitted from the mobile sources to the AQMS measurement altitude, well reproducing the measured CO concentration. At 18 KST on May 22, the WRF-CFD model simulated high CO concentrations because of high CO emission, broad updraft area, and an increase in turbulent diffusion cause by wind-shear increase near the ground.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.3
• /
• pp.683-693
• /
• 2017

Transport biofuels have been recognized as a promising means to resolve the following issues like global warming, oil depletion and environmental pollutions. Among various biofuels, biodiesel has several advantages such as less emission of air pollutants and higher cetane values compared to diesel oil. Demand for biodiesel in Korea is increasing that leads to higher dependence on the imported feedstocks. Therefore, it is important to utilize the waste materials collected domestically for biodiesel production. Food waste oil collected in waste treatment facility has not been used for biodiesel production due to high free fatty contents in the oil. In this work, biodiesel conversion of food waste oil by Amberlyst 15 was studied. Synthetic and actual food waste oils have been used in the study. First, the effects of the major operating parameters including reaction temperature, methanol to oil molar ratio and catalyst loading on the conversion rates and yields were determined with synthetic waste oil. Kinetic modelling work was also done to determine the activation energy of the reaction. From the work, optimization reaction conditions were determined to be 383K, 1: 26.1 for methanol molar ratio to oil, 10 wt.% for catalyst loading and 360 min for reaction time. Activation energy of the reaction is determined to be 29.75 kJ/mol, lower than those reported in the previous works. So the solid catalyst, Amberlyst 15, was more efficient for esterification than the solid catalysts employed in the other works. Agitation rates have the negligible effects on the conversion rates and yields. With the identified optimization conditions, conversion of the actual food waste oil was also carried out. The esterification yield of actual food waste oil in 60 min was 13% lower than that of synthetic waste oil but the final yields in 240 min were similar each other, 98.12% for synthetic oil and 97.62% for actual waste oil.

• Clinical and Experimental Pediatrics
• /
• v.51 no.1
• /
• pp.42-46
• /
• 2008

Purpose : Apolipoprotein E (Apo E) plays a major role in lipoprotein metabolism and lipid transport. Many investigators have described that Apo E polymorphisms is one of the most important genetic determinants for cardiovascular disease. The purpose of this study was to evaluate the association between Apo E polymorphisms and serum lipid profiles in obese adolescent. Methods : We measured the serum concentrations of glucose, apolipoprotein (Apo) A1, Apo B, total cholesterol (TC), triglyceride (TG), HDL and LDL-cholesterol after overnight fasting in obese adolescent. Apo E polymorphisms were determined by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). Results : 86 obese adolescents participated in this study. The body mass index (BMI) of participants were excess of 95 percentile by age and sex. Male to female ratio was 1.7 and mean age of study group was $16.2{\pm}1.8\;years$. Mean BMI was $27.4{\pm}2.5kg/m^2$. The frequency of ${\varepsilon}2$, ${\varepsilon}3$ and ${\varepsilon}4$ allele were 8.1%, 87.2% and 4.7% respectively. Study populations were classified into the following three genotypes 1) Apo E2 group (n=13, 15.1%) carrying either the ${\varepsilon}2/{\varepsilon}2$ or ${\varepsilon}2/{\varepsilon}3$ 2) Apo E3 group (n=65, 75.6%) carrying the most frequent ${\varepsilon}3/{\varepsilon}3$ 3) Apo E4 group (n=8, 9.3%) carrying either the ${\varepsilon}3/{\varepsilon}4$ or ${\varepsilon}4/{\varepsilon}4$. No differences were found among Apo E genotypes concerning age, sex, weight, height and BMI. Apo B and LDL-cholesterol concentrations were significantly higher in the Apo E4 group (P<0.05). No association were found between Apo E genotypes and glucose, Apo A1, TC, TG and HDL. Conclusions : We confirmed that serum concentrations Apo B and LDL-cholesterol were influenced by Apo E genotypes. Apo E polymorphisms seems to influence some alteration of lipid metabolism associated with obesity in adolescent.

• Applied Microscopy
• /
• v.39 no.4
• /
• pp.333-340
• /
• 2009

In the present study, ultrastructural features of the mesophyll tissue have been investigated in Crassulacean acid metabolism (CAM)-performing succulent Orostachys. A large central vacuole and numerous small vacuoles in the peripheral cytoplasm were characterized at the subcellular level in both developing and mature mesophyll cells. The most notable feature was the invagination of vacuolar membranes into the secondary vacuoles or multivesicular bodies. In many cases, tens of single, membrane-bound secondary vacuoles of various sizes were found to be formed within the central vacuole. multivesicular bodies containing numerous small vesicles were also distributed in the cytoplasm but were better developed within the central vacuole. Occasionally, electron-dense prevacuolar compartments, directly attached to structures appearing to be small vacuoles, were also detected in the cytoplasm. One or more huge central vacuoles were frequently observed in cells undergoing differentiation and maturation. Consistent with the known occurrence of morphologically distinct vacuoles within different tissues, two types of vacuoles, one representing lytic vacuoles and the other, most likely protein storage vacuoles, were noted frequently within Orostachys mesophyll. The two types coexisted in mature vegetative cells but did not merge during the study. Nevertheless, the coexistence of two distinct vacuole types in maturing cells implies the presence of more than one mechanism for vacuolar solute sorting in these species. The vacuolar membrane is known to be unique among the intracellular compartments for having different channels and/or pumps to maintain its function. In CAM plants, the vacuole is a very important organelle that regulates malic acid diurnal fluctuation to a large extent. The membrane invagination seen in Orostachys mesophyll likely plays a significant role in survival under the physiological drought conditions in which these Orostachys occur; by increasing to such a large vacuolar volume, the mesophyll cells are able to retain enormous amounts of acid when needed. Furthermore, the mesophyll cells are able to attain their large sizes with less energy expenditure in order to regulate the large degree of diurnal fluctuation of organic acid that occurs within the vacuoles of Orostachys.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.432-438
• /
• 2013

A study was conducted to examine the effect of maturity and precooling ($60%/0^{\circ}C$ and $80%/4^{\circ}C$), and light illumination on the storage life of 'Maehyang' strawberry meant for export. Fruits at 60% and 80% ripened stage were harvested from a commercial greenhouse in Jinju on April 3, 2012. Harvested fruits were transported to the precooling system within 30 minutes. Transported fruits were precooled the $4^{\circ}C$ for 2 hours and $0^{\circ}C$ for 5 hours by a forced draft cooling system, and then stored at $6^{\circ}C$. During the storage, the fruits were examined for their changes in hardness, soluble solid content, quality grade, acidity, Hunter value, weight loss, and the incidence of gray mold (Botrytis cinerea) at an interval of two days from April 5 to April 17. Hardness was decreased until 7th days and it was changed to increase at 9th days. Treatment of 60% maturity, $0^{\circ}C$ precooling and no light illumination of strawberry were shown the highest value in freshness. The soluble solid content harvested in 80% maturity strawberry was higher than 60% maturity strawberry until the third day. Quality grade decreased rapidly in 80% maturity stage with light illumination strawberry in comparison to the 60% maturity stage of strawberry. Hunter value 'L' and 'a' showed a rapid change in 60% maturity stage of strawberry. Weight loss decreased rapidly in 80% maturity, $0^{\circ}C$ precooling, and no light illumination of strawberry treatments. Gray mold incidence was found the most at 60% maturity, $4^{\circ}C$ precooling, and light illumination of strawberry. The results from our study indicate that effectiveness for keeping the freshness of strawberry was best achieved by harvesting in low maturity, precooling at $0^{\circ}C$, and with no light illumination.

• Journal of Radiation Protection and Research
• /
• v.41 no.1
• /
• pp.71-79
• /
• 2016

Background: It is necessary to analyze radioactivity of naturally occurring radioactive materials (NORM) in products to ensure radiological safety required by Natural Radiation Safety Management Act. The pretreatments for the existing analysis methods require high technology and time. Such destructive pretreatments including grinding and dissolution of samples make impossible to reuse products. We developed a rapid and simple procedure of radioactivity analysis for thorium series in the products containing NORM. Materials and Methods: The developed method requires non-destructive or minimized pretreatment. Radioactivity of the product without pretreatment is initially measured using gamma spectroscopy and then the measured radioactivity is adjusted by considering material composition, mass density, and geometrical shape of the product. The radioactivity adjustment can be made using scaling factors, which is derived by radiation transport Monte Carlo simulation. Necklace, bracelet, male health care product, and tile for health mat were selected as representative products for this study. The products are commonly used by the public and directly contacted with human body and thus resulting in high radiation exposure to the user. Results and Discussion: The scaling factors were derived using MCNPX code and the values ranged from 0.31 to 0.47. If radioactivity of the products is measured without pretreatment, the thorium series may be overestimated by up to 2.8 times. If scaling factors are applied, the difference in radioactivity estimates are reduced to 3-24%. Conclusion : The developed procedure in this study can be used for other products with various materials and shapes and thus ensuring radiological safety.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.308-316
• /
• 2013

Fresh ginseng has a limited storage life due to the quality change caused by microbial spoilage as well as physiological deterioration. The present study investigated the effects of 1-methylcyclopropene (1-MCP) treatment, an inhibitor of ethylene action, on the microbial growth and quality maintenance of fresh ginseng during storage. Harvested fresh ginsengs were treated with $1{\mu}L{\cdot}L^{-1}$ 1-MCP for 20 hours at $4^{\circ}C$ and then stored at room temperature (RT) for 18 days or low temperature ($4^{\circ}C$) for 160 days. After 18 days of storage at RT, the percentage weight loss in 1-MCP treated fresh ginseng (8.3%) is lower than that of control (10.1%). During long-term storage at $4^{\circ}C$, weight losses were increased slightly until 120 days without difference between non-treated and 1-MCP ginsengs. In contrast, after 120 days of storage at $4^{\circ}C$, higher increase in weight loss was observed in non-treated ginsengs than in 1-MCP treated ginsengs. Respiration rate and ethylene production of fresh ginseng were reduced by 1-MCP treatments at RT. The 1-MCP treatment also resulted in lower microbial population compared to those of non-treated ginsengs at RT. However, in ginsengs stored at $4^{\circ}C$ for short-term (45 days), no differences were noted in weight loss and microbial population between 1-MCP treated and non-treated ginsengs. Major ginsenosides was not changed by 1-MCP treatment during the 7 days of storage at RT. Results suggest that 1-MCP treatment can be used to maintain the freshness of ginseng at room temperature for short term storage and at low temperature for long term storage. 1-MCP treatment could be applied on fresh ginseng to avoid deleterious effect of exogenous ethylene during storage and shipping.

• Korean Journal of Biological Psychiatry
• /
• v.13 no.3
• /
• pp.178-190
• /
• 2006

Objectives : We investigated the relationship of the alcohol withdrawal symptoms with genetic polymorphism among alcohol dependence patients. Method : The measuring instruments used in this study were the Clinical Institute Withdrawal Assessment for Alcohol(CIWA-Ar). We analyzed DRD2 TaqI A polymorphism, dopamine transporter(DAT 1) polymorphism, and catechol-O-methyltransferase(COMT) polymorphism in 108 male alcoholics and 76 healthy controls. Results : The major findings was as follows. No significant differences for genotype distribution or allele frequency were revealed comparing controls and alcoholic patients. DRD2 Taq I : The subscale score of auditory hallucination among CIWA-Ar scale in homozygote was significantly higher than in heterozygote(OR=1.34). The total score of CIWA-Ar scale in heterozygote was significantly higher than in homozygote. DAT1 : In the subject without DAT-9 gene allele, it was significantly higher of the subscale score of sweating, anxiety among CIWA-Ar scale than in the subject with DAT-9 gene allele. And The total score of CIWA-Ar scale in the subject without DAT-9 gene allele was significantly higher than in the subject with DAT-9 gene allele. COMT : The total score of CIWA-Ar scale in heterozygote was significantly higher than in homozygote. Conclusion : Our results suggest the relationship between specific genetic factors and the withdrawal symptoms of alcohol dependent patients. As the candidate gene of the severity of alcohol withdrawal syndrome, DRD2 Taq1 gene was recommended.

• Radiation Oncology Journal
• /
• v.28 no.1
• /
• pp.50-56
• /
• 2010

Purpose: We report the results of an external audit on the absorbed dose of radiotherapy beams independently performed by third parties. For this effort, we developed a method to measure the absorbed dose to water in an easy and convenient setup of solid water phantom. Materials and Methods: In 2008, 12 radiotherapy centers voluntarily participated in the external auditing program and 47 beams of X-ray and electron were independently calibrated by the third party’s American Association of Physicists in Medicine (AAPM) task group (TG)-51 protocol. Even though the AAPM TG-51 protocol recommended the use of water, water as a phantom has a few disadvantages, especially in a busy clinic. Instead, we used solid water phantom due to its reproducibility and convenience in terms of setup and transport. Dose conversion factors between solid water and water were determined for photon and electron beams of various energies by using a scaling method and experimental measurements. Results: Most of the beams (74%) were within ${\pm}2%$ of the deviation from the third party's protocol. However, two of 20 X-ray beams and three of 27 electron beams were out of the tolerance (${\pm}3%$), including two beams with a >10% deviation. X-ray beams of higher than 6 MV had no conversion factors, while a 6 MV absorbed dose to a solid water phantom was 0.4% less than the dose to water. The electron dose conversion factors between the solid water phantom and water were determined: The higher the electron energy, the less is the conversion factor. The total uncertainty of the TG-51 protocol measurement using a solid water phantom was determined to be ${\pm}1.5%$. Conclusion: The developed method was successfully applied for the external auditing program, which could be evolved into a credential program of multi-institutional clinical trials. This dosimetry saved time for measuring doses as well as decreased the uncertainty of measurement possibly resulting from the reference setup in water.