• Journal of Korea Port Economic Association
• /
• v.29 no.3
• /
• pp.113-133
• /
• 2013

Since 1995, Korean enterprises have been rapidly expanding their business, especially to Eastern European countries such as Poland, Slovakia, Czech Republic, Hungary and so on. After the establishment of Korea-EU FTA in 2011, close relationship between the two through economic cooperation has been maintained. To efficiently connect the seaport regions to inland factories located in Eastern European countries, researches on mode choice in the intermodal sector are needed to perform. However, there is a scant of research for mode choice factors on intermodal transportation service in Europe. Therefore, the aim of this research is to understand the current situation of intermodal transportation sector in Europe, identify key factors of mode choice, and weigh the importance among factors influencing intermodal selection in the perspective of Korean exporters or forwarders with overseas cargo to Europe. A survey and in-depth interviews to CEOs and executives who have more than 20 to 30 years of career in logistics sector were carried out from April 01 to May 01, 2013. Using the fuzzy theory as the methodology, 'Reliability of arrival time', 'Transit time', and 'Freight Rate' are equally ranked as the most important factor in the selection of intermodal transportation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.2
• /
• pp.115-120
• /
• 2010

The formidable barrier property of the stratum cornemum and the high hydrophilicity of active ingredient make it difficult to permeate through the skin and reach to its site of action. The aim of this study was to investigate the effect of chemical penetration enhancers on the skin permeation of a hydrophilic cosmetic active ingredient, such as arbutin. The enhancing effects of N-methyl-2-pyrrolidone (NMP) on the permeation of a hydrophilic cosmetic active ingredient were evaluated by using Franz diffusion cell. The study indicated that NMP has considerable influence on the skin permeability. NMP was not only the most effective enhancer but also increased the skin permeability of arbutin approximately 1.3~1.5 fold compared with control without penetration enhancer. The lag time did not change with NMP, which suggested no effect of NMP on skin lipid fluidity. This suggest that arbutin co-permeated with NMP. The results indicate NMP is effective enhancer of a hydrophilic cosmetic active ingredient in penetration, with potential applications for drug delivery system.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.262-269
• /
• 2016

Subway station scales are determined by peak predictions. In this study, the purpose behind the installation of a subway is public transportation convenience and public interest, but economic validity is also important. By proving that the scale of the station is excessive with regard to the target station size for Seoul subway Line 5-8, a reasonable plan. can be sought. According to station installation standards, the area of the station under investigation here is out of the service levels by six stages (A~F), and it must be four or more levels (D). The Actual level for the B level is a two-step design. The Actual ratio for over- Peak predictions is only 17.8% on average. The results of measurements of the excess area and determination of the excessive costs were analyzed by subdividing the area and by calculating it based on the B level, finding that it is possible to provide benefits for customers only in the current design, with an area ratio of 16.3%. Given the weight, it was estimated that current conditions can meet the needs of only 18.6% of the current area. Simplifying the scale calculation method of the station, it is convenient, safe, and advantageous to move citizens only if the scale can be streamlined. Then, with a reduced initial investment, maintenance costs during the operation can be reduced.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.2
• /
• pp.123-136
• /
• 1996

A three-dimensional Galerkin-FEM model which can handle the temporal and spatial variation of density is presented. The hydrostatic approximation is used and density effects are included by means of conservation equation of heat and the equation of state. The finite difference grids are used in the horizontal plane and a set of linear-shape functions is used for the vertical expansion. The similarity transform is introduced to solve resultant matrix equations. The proposed model was first applied to the density-driven circulation in an idealized basin in the presence of the heat exchange between the air and the sea. The advection terms in the momentum equation were ignored, while the convection terms were retained in the heat equation. Coefficients of the vertical eddy viscosity and diffusivity were fixed to be constant. Calculation in a non-rotating idealized basin shows that the difference in heat capacity with depth gives rise to the horizontal gradient of temperature. Consequently, there is a steady new in the upper layer in the direction of increasing depth with compensatory counter flow .in the lower layer. With Coriolis force, geostrophic flow was predominant due to the balance between the pressure gradient and the Coriolis force. As a test in region of irregular topography, the model is applied to the Yellow Sea. Although the resultant flow was very complex, the character of the flow Showed to be geostrophic on the whole.

• Membrane Journal
• /
• v.16 no.4
• /
• pp.294-302
• /
• 2006

Silver polymer electrolytes are very promising membrane materials for the separation of olefin/paraffn mixtures. Olefin molecules are known to be transported through reversible complex formation with silver ions entrapped iii polymer matrix. However, they have poor long-term stability, which is very important fur the industrial application; the selectivity through the membrane decreases gradually with time mostly due to the reduction of silver ions ($Ag^+$) into silver nanoparticles ($Ag^0$). In this study, the stability of silver polymer electrolyte was investigated for poly(vinyl pyrrolidone) (PVP) and $AgBF_4$ system containing a surfactant, i.e. $C_{18}H_{35}(OCH_2CH_2)_{20}OH$ (Brij98) as a stabilizer. The reduction behavior of silver ions to silver nanoparticles in PVP was also investigated by atomic force microscopy (AFM) and UV-visible spectroscopy. It was found that the growth of silver nanoparticles was slower and selectivity of polymer electrolyte for propylene in propylene/propane was maintained longer time when Brij98 was added as a stabilizer.

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.67-74
• /
• 2012

A study was conducted to examine the effect of precooling and storage temperatures on the storage life of 'Maehyang' strawberry for export. Fruits at a 80% ripe stage were harvested from a commercial greenhouse in Gyeongsangnamdo Jinju on January 11, 2011. Fruits were precooled at 0, 2, $4^{\circ}C$ for 2-5 hours, and then transported for about 30 minutes. And stored in set chamber at 4, 8, $10^{\circ}C$, immediately. Fruits were examined for their changes in weight, hardness, Hunter color values, soluble solid content (SSC), acidity, and incidence of gray mold (Botrytis cinerea) during storage. The fresh weight decreased during storage at all temperatures. Especially, strawberry treated the lowest precooling and storage temperatures was the greatest in quality. The hardness was drastically decreased in precooled at $4^{\circ}C$ and stored at $10^{\circ}C$ after storage 10 days. SSC was the greatest when strawberry stored at the lowest temperature. Acidity increased during storage at all temperatures. But in the last day after storage, the strawberry of precooled at $4^{\circ}C$ and stored at $10^{\circ}C$ was the highest as 0.7%. Gray mold was the greatest at $10^{\circ}C$ storage temperature. The results indicate that effectiveness for keeping the freshness was best achieved by precooling at $0^{\circ}C$ and storage at $4^{\circ}C$.

• Journal of Korea Port Economic Association
• /
• v.34 no.3
• /
• pp.113-132
• /
• 2018

Mokpo port marked the $131^{st}$ anniversary of its opening in 2018. while the Mokpo has taken the new port development initiatives, it is limited by inefficient port functioning due to the lack of maritime port policy and government investment. Hence, port logistics has not been activated. Additionally, studies on Mokpo port have not been conducted, and knowledge available on the port is declarative in nature. On the other hand, research on port competitiveness focuses on how to analyze the factors that determine port competitiveness. Therefore, this study was intended to expand the existing research on Mokpo port and conduct an analysis of non-competitiveness factors and suggested improvements by considering the operational aspect of Mokpo port. In this regard the importance of non-competitiveness factors was assessed through an analytic hierarchy process(AHP) analysis and the influence of the non-competitiveness factors was analyzed through an fuzzy structural modeling(FSM) analysis. The result of the AHP analysis show ed the important non-competitiveness factors included the deactivation of industrial complexes around Mokpo port, the number of liner route, the cost of the pilot and tug. Accor ding to the FSM analysis, the top level included the non-competitive factors at Mokpo port; the intermediate level included the number of liner routes, cost of pilot and tug, enrance and clearance fee, costs of inland transportation, fee for port facilities, and loading and unloading costs; and the bottom level comprised the most non-competitive factors including the deactivation of industrial complexes around Mokpo port, hinterland connectivity, access to international port, incentives, and cost of transportation and storage. Based on the results of analysis, improvements were suggested for non-competitive factors of Mokpo.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1589-1597
• /
• 2021

Submarine groundwater discharge (SGD) in coastal areas is gaining importance as a major transport route that bring nutrients and trace metals into the ocean. This paper describes the analysis of the seasonal changes and spatiotemporal characteristicsthrough the modeling monthly SGD for 35 years from 1986 to 2020 for the Nakdong river basin. In this study, we extracted 210 watersheds and SGD estimation points using the SRTM (Shuttle Radar Topography Mission) DEM (Digital Elevation Model). The average annual SGD of the Nakdong River basin was estimated to be 466.7 m²/yr from the FLDAS (Famine Early Warning Systems Network Land Data Assimilation System) recharge data of 10 km which is the highest resolution global model applicable to Korea. There was no significant time-series variation of SGD in the Nakdong river basin, but the concentrated period of SGD was expanded from summer to autumn. In addition, it was confirmed that there is a large amount of SGD regardless of the season in coastal area nearby large rivers, and the trend has slightly increased since the 1980s. The characteristics are considered to be related to the change in the major precipitation period in the study area, and spatially it is due to the high baseflow-groundwater in the vicinity of large rivers. This study is a precedentstudy that presents a modeling technique to explore the characteristics of SGD in Korea, and is expected to be useful as foundational information for coastal management and evaluating the impact of SGD to the ocean.

• Clean Technology
• /
• v.27 no.4
• /
• pp.277-290
• /
• 2021

A supercapacitor, also called an ultracapacitor or an electrochemical capacitor, stores electrochemical energy by the adsorption/desorption of electrolytic ions or a fast and reversible redox reaction at the electrode surface, which is distinct from the chemical reaction of a battery. A supercapacitor features high specific power, high capacitance, almost infinite cyclability (~ 100,000 cycle), short charging time, good stability, low maintenance cost, and fast frequency response. Supercapacitors have been used in electronic devices to meet the requirements of rapid charging/discharging, such as for memory back-up, and uninterruptible power supply (UPS). Also, their use is being extended to transportation and large industry applications that require high power/energy density, such as for electric vehicles and power quality systems of smart grids. In power generation using intermittent power sources such as solar and wind, a supercapacitor is configured in the energy storage system together with a battery to compensate for the relatively slow charging/discharging time of the battery, to contribute to extending the lifecycle of the battery, and to improve the system power quality. This article provides a concise overview of the principles, mechanisms, and classification of energy storage of supercapacitors in accordance with the electrode materials. Also, it provides a review of the status of recent research and patent, product, and market trends in supercapacitor technology. There are many challenges to be solved to meet industrial demands such as for high voltage module technologies, high efficiency charging, safety, performance improvement, and competitive prices.

• Environmental and Resource Economics Review
• /
• v.28 no.2
• /
• pp.307-326
• /
• 2019

The electric vehicle is a representative measure to reduce greenhouse gas and local air pollutants in the transportation sector. Most countries provide purchase subsidies and tax reductions to promote electric vehicle sales. The electric vehicles have been considered as zero-emission vehicles(ZEV) in light of the fact that there has been no pollutant emission during driving. However, recent studies have pointed out that the pollutant emitted from the process of generating electricity used for charging the electric vehicles need to be treated as emissions of the electric vehicles. Furthermore, the environmental benefits of electric vehicle replacing the internal combustion vehicle vary with the power mix. In line with the recent studies, this study analyzes the impact of electric vehicles based on the current power mix and future energy transition scenarios in Korea. To estimate the precise air pollutants emission profile, this study uses hourly electricity generation and TMS emission data for each power plant from 2015 to 2016. The estimation results show that the electric vehicles under the current power mix generate the environmental benefits of only -0.41~10.83 won/km. Also, we find that the environmental benefit of electric vehicle will significantly increase only when the ratio of the coal-fired power plant is reduced to a considerable extent.