• Korean Chemical Engineering Research
• /
• v.45 no.4
• /
• pp.345-350
• /
• 2007

During PEMFC operation, OCV(open circuit voltage) and low humidity conditions accelerate the degradation of perfluorosulfonic acid membrane. There have been no studies that clearly explain why these conditions accelerate the membrane degradation. In this study, the hydrogen permeability through the membrane, I-V polarization of MEA, fluoride emission rate(FER) and $H_2O_2$ concentration in condensed water were measured during cell operation under OCV and low relative humidity(RH). The experimental results were evaluated with oxygen radical mechanism the most commonly known for membrane degradation. It seems that low RH of anode is a good condition for $H{\cdot}$ radical formation on the Pt catalyst and the OCV condition accelerate the $H{\cdot}$ to form $HO_2{\cdot}$ radical attacking the polymer membrane.

• Journal of Hydrogen and New Energy
• /
• v.25 no.4
• /
• pp.344-354
• /
• 2014

Activated charcoal supported nickel molybdenum carbide (carburized Ni-Mo/AC) catalysts were prepared by wet-impregnation followed by temperature-programmed carburization using 20% $CH_4/H_2$ gas. The effects of pH and initial Ni/Mo mole ratio during wet-impregnation step on the characteristics of the carburized Ni-Mo/AC catalysts were investigated using ICP, XRD, XPS, BET and $CO_2$-TPD techniques, and correlated with the catalytic activity of the carburized Ni-Mo/AC in methane dry reforming reaction. Comparison of the results of methane dry reforming reaction kinetics with the results of characterization of the carburized Ni-Mo/AC catalyst showed that the catalytic activity in methane dry reforming reaction was higher at higher initial Ni/Mo mole ratio or at lower pH(3~natural value). This phenomenon was related to the crystal size of metallic Ni in the carburized Ni-Mo/AC catalyst.

• Applied Biological Chemistry
• /
• v.24 no.3
• /
• pp.161-166
• /
• 1981

Products of ginseng browning reaction were investigated to determine the nature of their antioxidant activity using a model system, White Ginseng and Red Ginseng extracts. In the simulated ginseng model system, the brown color was intensified with an increase in the length of reaction time and the antioxidant activity initially increased in proportion the length of reaction time for up to 17 hrs and then leveled off thereafter. Pararell results were obtained manufacturing of Red Ginseng, Comparison of the antioxidant activity of the inner and outer solutions after dialysis of browning solution showed that the outer solution had a stronger antioxidant activity than the inner one. For further analyses, browning reaction products were fractionated into three peaks on Amberlite CG-120 type I ionexchange resin and designated as fractions I, II and III in order of elution. Partial characterization of the fractions revealed that floe most intense brown fraction (Fraction II) had the strongest antioxidant activity and also exhibited reducing power for Somogyi-Nelson reagents and ninhydrin positive reaction. Both the browning reaction products and Red Ginseng extracts were found to possess potent reactivity with ${\alpha}$,${\alpha}'$-diphenyl-${\beta}$-picrylhydrazyl, whereas White Ginseng extracts showed negligible reactivity.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.7
• /
• pp.820-825
• /
• 2007

Earthworm casting was the natural fertilizer that contained high concentrations of nutrients such as nitrogen, phosphate and potassium and of over $10^8$ CFU/ml of microorganisms. Greater than 80% of feed was excreted through the fermentation by the intestinal enzyme, after worm had eaten feeds such as fallen leaves and rotten roots under the ground. Also, the soil structure of casting was known to be very efficient in the aspects of the porosity, the water permeability, and deodorizing activities. In this research, the biofilter packed with a biomedia made of casting and waste polyurethane foam, a binder, which helped to improve the durability and perpetuity of casting, was investigated to degrade malodorous hydrogen sulfide gas. The biomedia had no need of extra supply of nutrients and of microbial inoculations. On the beginning of the operations, it showed 100% removal of hydrogen sulfide gas without lag phase. At SV of 50 $h^{-1}$, hydrogen sulfide gas from the outlet of the biofilter was not detected, when inlet concentration increased to 450 ppmv. After that, removal efficiency decreased as increasing inlet hydrogen sulfide concentration. Hydrogen sulfide removal was maintained at almost 93% until inlet concentration was increased up to 950 ppmv, at which the elimination capacity of $H_2S$ was 61.2 g $S{\cdot}m^{-3}{\cdot}h^{-1}$. Maximum elimination capacity guaranteing 90% removal was 61.2, 65.9, 84.7, 89.4 g $S{\cdot}m^{-3}{\cdot}h^{-1}$ at SV ranging from 50 $h^{-1}$ to 300 $h^{-1}$, but was 59.3 g $S{\cdot}m^{-3}{\cdot}h^{-1}$ at SV of 400 $h^{-1}$. The results calculated from Michaelis-Menten equation revealed that $V_m$ increased from 66.04, 88.96, 117.35, 224.15, to 227.54 g $S{\cdot}m^{-3}{\cdot}h^{-1}$ with increasing space velocity in the range of 50 $h^{-1}$ to 400 $h^{-1}$. However, saturation constant$(K_s)$ decreased from 79.97 ppmv to 64.95 and 65.37 ppmv, and then increased to 127.72 and 157.43 ppmv.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.4
• /
• pp.321-337
• /
• 2010

Long-term trends and distribution patterns of water quality were investigated in the Mokpo coastal areas of the Yellow Sea, Korea from 1979 to 2009. Water samples were collected at 5 stations and physicochemical parameters were analyzed including water temperature, salinity, suspended solids (SS), chemical oxygen demand (COD), dissolved oxygen (DO) and nutrients. Spatial distribution patterns of temperature, pH and DO were not clear among stations but the seasonal variations were distinct except ammonium. The trend analysis by principal component analysis (PCA) during 30 years revealed the significant variations in water quality in the study area. Spatial water qualities were discriminated into 3 clusters by PCA; station cluster 1, 2~4, and 5. Annual water qualities were clearly discriminated into 4 surface water clusters and 2 bottom water clusters by PCA. By this multi-variate analysis, the annual trends were summarized as the followings; water temperature, pH and COD tended to increase from late 1980's, salinity to decrease, phosphate to increase from 1994 and dissolved inorganic nitrogen to increase, due to the input of fresh water same as shown in Kyoungin coastal area, Asan coastal area, Choensoo bay and Gunsan coastal area.

• Journal of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.510-515
• /
• 1985

Color of $MoO_{(aq)}^{3+}$ in concentrated methanesulfonic acid (∼10M) changes dark green due to the formation of $Mo_2O_2(OH)_{2(aq)}^{4+}$ dimer. This color is similar to that shown by addition of water to that shown by addition of water to green $MoO_{(aq)}^{3+}$ solution in 15-16M methanesulfonic acid. The molar extinction coefficient of monomer in 15M methanesulfonic acid is about 20 at 415nm. Rate constants are independent on the aquomolybdenum (V) and hydrogen ion concentration under the condition of this experment. Bridging hydroxides of $Mo_2O_2(OH)_{2(aq)}^{4+}$ are dehydrogenated at the less concentration of ∼6 M for HPTS and ∼10M for $CH_3SO_3H$. The structure of both the yl-oxygens and the bridging oxygens of final product is identified to (*image)unit.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.237-238
• /
• 2009

1999년 Zwilling 등은 타이타늄과 타이타늄 합금위에 불산을 포함하는 산성 전해질에서 양극산화 방법에 의해 $TiO_2$ 나노튜브를 형성시켰다. 그러나 HF의 강한 용해성으로 인해 튜브의 길이를 500 nm이상 성장 시킬 수 없다는 문제점을 가지고 있었고 그 후에 HF대신에 전해질에 $NH_{4}F$를 혼합하여 pH를 조절하는 방법으로 $TiO_2$가 용해되는 속도를 감소시켜 약 $2{\sim}4$배 더 크게 성장 시킬 수 있다고 보고한 바 있지만 수 ${\mu}m$ 이상의 길이로는 성장 시킬 수 없다는 한계를 가지고 있었다. 최근에는 불소이온을 포함하는 점액질의 유기전해질에서 높은 종횡비, 40-60 nm의 작은 기공직경과 매끄러운 튜브벽을 가지는 수 um이상의 나노튜브를 성장 시키는 보고가 있으나 $TiO_2$ 나노튜브의 제조에 영향을 미치는 파라메타에 대한 연구가 아직 많지 않은 실정이다. 따라서 본 연구에서는 전해질의 구성, 전압, 양극산화 시 교반의 영향에 대해 조사하였다. 불산과 에틸렌글리콜 전해질에서 형성된 $TiO_2$ 나노튜브의 비 표면적의 차이를 조사했고 튜브의 길이와 기공크기도 양극산화 시 인가전압과 전해질 구성에 따라 다른 것을 확인할 수 있었다. 이는 포어 바닥에서 국부적인 산성화를 유발하는 타이타늄의 가수분해와 $TiO_2$의 용해는 산화피막층의 용해작용을 증가시키는 수소이온의 농도를 증가시고 그에 따라 인가접압이 증가함에 따라 전해질 내의 이온수송을 활발하게 하기 위한 구동력이 증가해 전류밀도가 높아지는 것으로 확인되었단. 또한 양극산화 동안 전해질을 교반 한 경우 그런지 않은 경우에 비해 전해질 내의 유속(mass flow)를 증가시켜 더 긴 나노튜브를 얻을 수 있었다.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.3
• /
• pp.5-16
• /
• 2010

Groundwater quality monitoring wells, which is over 2,000 in South Korea, were managed to observe groundwater quality since the early 1990s. Groundwater was sampled and analyzed biannually from 781 monitoring wells located in the areas with a high possibility of pollution. The average concentrations of cyanide, mercury, phenols, hexavalent chromium, trichloroethylene, tetrachloroethylen, and 1.1.1-trichloroethane for 12 years' data of detected cases were above the groundwater quality standard, but the average concentrations of the general quality items such as pH, electric conductivity, nitrate-nitrogen, and chloride, are below the standard. To compare a quality trend for each land-use type of the monitoring site, Sen's method is used for four quality items; chloride, nitrate-nitrogen, pH, and electric conductivity. The upward trend for these items is remarkable in urbideareas and industrial complexes and this trend continues still strongly after 2001. The deviation in a trend slopes of monitoring wells becomes bigger in the mid-2000s. In conclusion, trend analysis using existing monitoring data cidebe effective to forecast the future water quality condition and the solid action to protect groundwater quality should be done in advance using a result of trend analysis.

• The Korean Journal of Ecology
• /
• v.27 no.5
• /
• pp.291-300
• /
• 2004

This study was carried out to investigate the relationship of occurrence and distribution of Eupatorium rugosum by forest types and soil characteristics in Mt. Namsan in Seoul, Korea. E. rugosum is designated as a harmful non-indigenous plant in ecosystem by the Natural Environment Conservation Act in Korea. E. rugosum grew along roadside and in valleys with some favorable light conditions. E. rugosum occurred in aggregations under Pinus densiflora and Robinia pseudoacacia communities. And it was sparse in forests of Quercus mongolica and P. koraiensis. The representative herb layer species were Oplismenus undulatifolius, and Parthenocissus tricuspidata in the E. rugosum communities. There was a significantly negative correlation between the coverage of E. rugosum and the coverage of tree layer. However, the result of ANOVA of E. rugosum coverage by dominant species of tree layers did not show a significant difference (p>0.05). The level of soil moisture content, organic content, and pH, was slightly higher in communities with E. rugosum than without, but it was statistically non-significant difference. However, it was found that the coverage of E. rugosum was very significantly negative correlated with the depth of top soil profile (litter and fermentation layer, p<0.05).

• Composites Research
• /
• v.16 no.2
• /
• pp.54-61
• /
• 2003

In this study, manufacturing process for microcapsules with the self-healing agent was introduced and the characteristics of microcapsules manufactured by varying with various manufacturing process variables were evaluated through a particle size analyzer, an optical microscope, and a TGA. Urea-formaldehyde resin was used for the thin wall of microcapsules and DCPD (dicyclopentadiene) was used for the self-healing agent. The various manufacturing process variables, such as (1) 24hr, 40hr, 48hr, 60hr of the solution time of the EMA copolymer, (2) pH3.5, pH4.0, pH4.5 of the hydrogen ion concentration of the emulsified solution, (3) 400rpm, 500rpm, 600rpm, 1000rpm of the agitation speed of the emulsified solution, (4) $50^{\circ}$, $55^{\circ}$, $60^{\circ}$ of the reaction temperature of the emulsified solution, were considered. According to the results, the particle size distribution of microcapsules was affected on the agitation speed, and the thermal stability of microcapsules was influenced by the solution time of the EMA copolymer, the hydrogen ion concentration, and the reaction temperature of the emulsified solution. Therefore, suitable manufacturing process variables should be applied to obtain thermally stable microcapsules capable of containing the healing agent capable until the thin wall of microcapsules were to be burned.