• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.24-34
• /
• 1992

Recent studies dealing with the fundamental understanding and applications of bimetallic catalysts are discussed. Bimetallic catalysts have had a major industrial impact, specifically for the reforming of petroleum naphtha, for the hydrogen reduction of carbon monoxide, and for the three way catalytic converter system. The action of the bimetallic catalysts in these reactions may be interpreted in terms of ensembles, electronic influences and surface structure. Various combinations of metal pairs have been considered in order to evaluate the role played by the added metals. For catalyst selectivity control, the possibility of surface enrichment of one element has been recognised. More generally, the influence of preparative variables on the formation of supported catalysts has been clarified, In particular by temperature programmed reduction (TPR). Information on the structure of bimetallic catalysts has been obtained with chemical probes, such as chemisorption and reaction rate measurement and physical probes, such as extended X-ray absorption fine structure (EXAFS), scanning transmission electron microscopy (STEM) and Xe-NMR.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.2
• /
• pp.21-30
• /
• 2012

This paper analyzes the map of soil contamination in years of 2009 by actual survey in Incheon. South-east national industrial complex and the US Army base in Bu-Pyung are turned out to be high polluted area because spilling of oil storage facilities, vehicle and glass industries. So, the soil contamination in Incheon Metropolitan area will be getting more attention. To solve this problem, the soil contamination has been predicted by using the visual Sufer and visual Modflow which are analysis program in geotechnique and water flow. The result of analysis is that F and TPH will be retarded after 5 years. However, the contamination diffusion will be increased if there is no proper management of soil contamination.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.373-373
• /
• 2010

광촉매능을 갖는 $TiO_2$는 국내외적으로 많은 연구가 진행되고 있다. 빛의 조사로 발생하는 다양한 물리 화학적 촉매특성이 환경정화 뿐만 아니라 및 에너지 흡수차단 기능도 갖고 있어 최근 주목을 받고 있다. 응용분야로 초친수성 유리제품, 필터, 살균기능의 의료용 부품소재, 고효율 수소생산 및 태양전지 등에 활용성이 커서 친환경에너지 소재로 각광을 받고 있다. 본 연구에서는 초친수성 자동차의 사이드미러 개발을 위해 유리표면에 초친수성 $TiO_2$를 코팅하 고 그의 특성을 평가하였다. 특히, 이종밴드갭을 갖는 복합구조 $TiO_2/Cr_2O_3$/Cr 박막을 스퍼터링법으로 증착하여 중간층인 $Cr_2O_3$의 역할을 고찰하였다. 제조된 박막의 결정구조는 thin film형 X-선회절기(XRD)를 사용하여 분석하였으며, 박막의 표면 미세구조는 FE-SEM(Field Emission Scanning Electron Microscope)와 AFM(Atomic Force Microscope)으로, 화학구조는 XPS(X-ray Photoelectron Spectroscope)로 분석하였다. 친수성 평가는 실온 분위기에서 접촉각 측정기(Topcon-UVR2)를 사용하여 평가 하였으며 이때 조사되는 UV는 파장이 365nm이다. $Cr_2O_3$(비정질)/Cr박막위에 제조된 $TiO_2$ 박막은 균일한 anatase-$TiO_2$가 성장했으나, Cr, $Cr_2O_3$(결정질)박막위에 제조 된 $TiO_2$ 박막은 anatase상과 rulile상이 혼합된 형태로 성장하였다. $TiO_2$/Cr, $TiO_2/Cr_2O_3$(비정질)/Cr, $TiO_2/Cr_2O_3$(결정질)/Cr박막은 UV조사 1시간 만에 $10^{\circ}$ 이하의 초친수성을 나타내었다. 이종 밴드갭을 갖는 $TiO_2/Cr_2O_3$(비정질)/Cr박막은 40시간까지 친수성을 유지하는 결과를 나타냈다.

• Analytical Science and Technology
• /
• v.18 no.2
• /
• pp.139-146
• /
• 2005

Removal of NO contained in automobile exhaust gas was accomplished by the non-selective catalyst reduction method. The catalysts were prepared through loading of a specific amount of Ag into ${\gamma}-Al_2O_3$. The conversion of $NO_x$ was studied by varying the temperatures, $O_2$ concentrations and $SO_2$ concentrations for the prepared catalysts. The influence of the structure of catalyst to $NO_x$ conversion was followed through the analysis of the physical properties of the prepared catalysts. Experiments were conducted on each of the catalysts by varying the reaction conditions to find an optimum condition. The catalyst $Ag/{\gamma}-Al_2O_3$ shows a highest $NO_x$ conversion when the Ag content was 2 wt% and a reaction temperature of about $450^{\circ}C$. and after conducting the experiments, samples of before and after experiments analyzed using XRD, XPS, TPR, and UV-Vis DRS experiments. The result indicated that when Ag oxide content could not be maintained well at high temperatures $NO_x$ conversion decreased.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1979.10a
• /
• pp.244.3-245
• /
• 1979

1. 수율계수 함수의 영향 : 유가 배양에 있어서 수율 계수가 제한 기질 농도의 함수일 경우에 대한 연구를 수행하였다. 사용한 수율 계수 함수는 기질 농도에 대하여 선형 함수였으며 목적함수는 중간 대사 물질의 생산량이었다. 1-가) 수율 계수 함수의 기울기가 음의 값으로 적어짐에 따라 제한 기질의 공급속도가 증가되었다. 1-나) 일반적으로 초기의 얼마 동안은 회분 배양에서와 같이 공급 속도가 거의 없었으며 그후 전환점 이후에 가서야 공급 속도가 증가하였다. 1-다) 전환점 이후에서도 처음에는 대부분의 경우에 공급속도가 음의 값으로 부터 시작하여 증가하기 시작하였다. 1-라) 어떤 경우에는 배양 초기부터 공급 속도가 양의 값으로부터 시작하였으나 곧 감소하였다가 다시 증가하는 비 단조형 변화를 보였다. 1-마) 전환점 이후에서 공급 속도가 증가하는 형태에서도 처음에는 선형 증가를 보이다가 나중에 지수적 증가를 보였다. 1-바) 위와 같은 공급 속도의 변화에 따른 발효조 내의 제한 기질 농도의 변화는 초기에는 가능한 최대치를 유지하다가 전환점 이후에는 갑자기 감소하는 형태를 취하였다. 2. 목적 함수의 영향: 목적 함수가 균체량과 생성 중간 대사물질 량의 선형 결합일 때 대하여 연구하였다. 선형 결합 계수로는 균체량과 생성대사 물질의 상대적인 값어치를 취하였다. 2-가) 허용 최대 균체 농도가 제한되어 있는 상황 하에서 생성 대사 물질의 상대적인 값이 증가 할수록 목적 함수가 증가하였다. 2-나)생성대사 물질의 상대적인 값이 증가할수록 전환점의 위치가 줄어들었다. 2-다) 생성대사 물질 상대적 값의 단위 증가에 대한 목적 함수는 균체량을 감안하지 않은 야마네박사의 결과에 수렴하였다. 2-라) 공급 속도는 상대 값이 커질수록 줄어들었다. 2-마) 균체량의 시간에 대한 곡선은 상대값이 증가할수록 감소하고 전형적인 분기점 형태의 변화를 보였다.변이 뚜렷하여 이로 인한 외임파강내의 염증성병변이 뚜렷이 나타나 있으며 와우관의 특히 기저회전에서의 유모세포의 손실이 심한 것으로 보아 중이염으로 인한 골도의 고음역에서의 손실이 발생함을 알 수 있다.A group), vinclozolin, procymidone, tetradifon cypermethrin, 그리고 fenvalerate(B group)에서는 70% 이상의 회수율을 얻었고, 20%의 ethyl acetate/hexane을 사용하여 분석한 경우는 5%나 10%의 ethyl acetate/hexane을 사용하여 분석했을 때보다 좋은 결과를 나타내어 전체 16종의 농약 중 14종에서 75% 이상의 회수율을 얻었으나, alachlor와 bifenthrin은 매우 낮은 회수율을 보여서 ethyl acetate와 hexane의 혼합용매가 이들 두 농약성분의 분석에는 적합하지 않은 용출 용매임을 알 수 있었다.NO_2의$ 급성 중독증상으로서는 눈, 코를 강하게 자극하고 폐충혈, 폐수종, 기관지염, 폐염 등을 일으킨다. 만성 중독시에는 만성폐섬유와 및 폐수종을 일으킨다. (4) $오존(O_3)$ Ozone은 자동차 배기가스에서 나오는 $NO_2$ gas 및 탄화수소와 작용하여, PAN이라는 자극성 물질을 생성시키는 광학적 Smog의 주요소로 알려져 있다. 자극적인 냄새가 있음으로 불쾌감을 주고 비, 인후점막의 전조감과 두통이 오며 폐기능을 저하시키며 더욱 진행되면 폐충혈, 폐수종 등을 일으킨다 (5) Smog에 의한 건강피해 대표적인 것이 1952.12.5~12.8까지 4일간 영국 Lon-don에서 계속된 Smog사건이며, 이 사건으로 말미암아 호흡기질환 사망율이 사건전보다 사건기간 중 혹은 사건후에 5~10배의 증가율을 보였다. 이때 Smog의 주원인은 연료의 불완전 연소에 의한 연기와 이때 발생

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.608-613
• /
• 2019

NOx (Nitrogen oxide) in the exhaust gas from vehicle engines is considered one of the most harmful substances in air pollution problems. NOx is made when combustion occurs under high temperature conditions and EGR (exhaust gas recirculation) is normally used to lower the combustion temperature. As the EGR ratio increases, the NOx level becomes low, but a high EGR ratio makes the combustion unstable and causes further air pollution problems, such as CO and unburned hydrocarbon level increase. This study showed that fuel droplets could move more freely by the radiation of sonic wave for the stable combustion. In addition, the engine performance improved with increasing EGR ratio. As a basic study, the effect of sonic wave radiation on the velocity of fuel droplets was studied using CFD software. The results showed that the velocity of small droplets increased more under high frequency sonic wave conditions and the velocity of the large droplets increased at low frequency sonic wave conditions. In addition, an engine analysis model was used to study the effects of the increased combustion stability. These results showed that a 15% increase in EGR ratio in combustion resulted in a 45% decrease in NOx and a 10% increase in thermal efficiency.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.5
• /
• pp.491-498
• /
• 2010

Humidification of PEM fuel cells is necessary for enhancing their performance and lifetime. In this study, a humidification system was designed and tested; the system includes an air-supply tube (inner diameter: 75 mm) through which a nozzle can be directly inserted and a cyclonic separator for the removal of water droplets. Three types of nozzles were employed to study the influence of injection pressure, air flow rate, and spray direction on the humidification performance. To evaluate the humidification performance, the concept of humidification efficiency was defined. In the absence of an external heat source, latent heat for evaporation will be supplied by the own enthalpies of water and air. Thus, the amount of water sprayed from the nozzle is the most critical factor affecting the humidification efficiency. Water droplets were efficiently removed by a cyclonic separator, but re-entrainment occurred at high air flow rates. The absolute humidity and humidification efficiency were $21.29\;kJ/kg_{da}$ and 86.57%, respectively, under the following conditions: nozzle type PJ24; spray direction angle $90^{\circ}$; injection pressure 1200 kPa; air flow rate 6000 Nlpm.

• Resources Recycling
• /
• v.26 no.3
• /
• pp.79-91
• /
• 2017

The core of Hydrogen Fuel Cell Vehicles (FCV) is polymer solid fuel cell (PEFC), and the core material that generates electrochemical electricity in the cell is platinum catalyst. Platinum is localized in South Africa and Russia, and the world production of Pt is about 178 tons per year, which is expensive and recycled. At present, the amount of Pt used in PEFC is $0.2{\sim}0.1mg/cm^2$. In order to reduce the price of the battery and increase the FCV supply, the target is to reduce the amount of Pt used to $0.05{\sim}0.03mg/cm^2$. $Pt-Pd/Al_2O_3$, Pt/C, Pt/GCB, Pt/Au/C, PtCo/C, PtPd/C, etc. by using polyol method using nano Pt, improved Cu-UPD/Pt substitution method and nano-capsule method, Have been researched and developed, and there have been reported techniques for improving the activity of Pt catalysts and stabilizing them. This paper investigates the production technology of nano-Pt and nano-Pt catalysts, recycling of spent Pt catalysts and application trends of Pt catalysts.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.887-894
• /
• 2018

An electric vehicle is emerging as an alternative to the response of global climate change and sustainability. However, an Electric vehicle has not been popular due to the constraints such as its price or technical limitations. In order to analyze the effect of purchasing electric vehicles, this study conducted a binary logistic regression model that demonstrates the relation between purchasing and influencing variables. Variables which have high correlation were excluded from the model through the correlation analysis to prevent multicollinearity. Socio-economic variables such as the number of owned vehicles, sex, ages are not significant. On the other hand, Variables related to prices, charging and policy are found to have a significant to effect on the purchase of electric vehicles. In accordance with the model estimated result, it seems to be necessary to improve the charging incentives, or to provide electric car information and to expand opportunities for experience electric vehicles. The result is also expected to be helpful for spreading electric vehicles and formulating policies.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.808-818
• /
• 1994

Effects of ceria additive on the activity and thermal aging behavior of supported Ru catalysts were investigated using Ru/${\gamma}$-$Al_2O_3$and Ru/$CeO_2$-${\gamma}$-$Al_2O_3$. The catalysts were characterized by $^{129}Xe$-NMR and $H_2$ chemisorption. The cataltic activity for conversion of CO, HC and $NO_x$ was measured using simulated automobile engine exhausts under lean, rich and stoichiometric conditions. For both fresh and aged catalysts, Ru/$CeO_2$-${\gamma}$-$Al_2O_3$ was more active than Ru/${\gamma}$-$Al_2O_3$ for all three pollutants. Results of $^{129}Xe$-NMR and $H_2$ chemisorption indicated that sintering of Ru particles occurred to the same extent for both catalysts during the thermal aging process. After thermal aging at 673K, however, the catalytic activity of the aged Ru/$CeO_2$-${\gamma}$-$Al_2O_3$ was substantially higher than that of the fresh one, while the activity of Ru/${\gamma}$-$Al_2O_3$ decreased after the thermal aging. This finding may suggest new active sites were created during the thermal aging, probably in the vicinity of the interface between Ru and Ce. For more quantitative investigation of the effect of a cation such as Ce on the thermal aging of Ru metal particles, Ru catalysts supported on cation-exchanged Y-zeolites were used as the model catalysts. The results indicated that when Ba, Ca, La, Y or Ce was used for the cation exchange, the exchanged cation did not affect the thermal aging behavior of Ru in Y-zeolite, as evidenced by $^{129}Xe$-NMR and EXAFS.