• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.28-32
• /
• 2007

최근 대두되고 있는 에너지 문제와 더불어 대체에너지 개발 및 에너지의 이용효율을 높이려는 연구가 많이 이루어지고 있다. 수소에너지는 비 탄소계 연료로서 그 중요성에 대한 인식이 높아지고 있으며, 다양한 분야에서 수소에너지를 이용하기 위한 노력이 이루어지고 있다. 수소는 재순환이 가능하고, 환경에 미치는 영향이 적기 때문에 미래형 에너지원으로 각광을 받고 있다. 수소이용 기술 중 연료 전지는 에너지 변환효율이 높고 유해 배출물이 생성되지 않아 차세대 발전시스템으로 유망하지만 비용과 기술적 제약으로 단기간에 상용화하기에는 어려움이 있다. 따라서 저비용, 고효율의 수소에너지를 이용 할 수 있는 시스템 개발이 요구되고 있다. 리니어동력/발전시스템은 저비용으로 제작이 가능하고 기존 기술의 인프라를 활용할 수 있는 장정과, 크랭크 기구가 없기 때문에 얻어지는 변환손실, 열손실을 최소화 할 수 있는 효율의 장점 때문에 고효율의 수소 이용 기관으로 평가되고 있다. 본 연구에서는 수소이용 통력시스템의 직선운동을 전기적인 에너지로 변환 할 수 있는 고효율의 리니어 발전시스템 개발을 위해 Prototype의 평판형 및 원통형의 리니어발전기를 제작했고 각각의 성능에 대한 평가와 엔진과 발전기의 연계운전 결과를 비교하여 시스템 전체에 대한 성능예측을 했으며 연계운전을 통해 출력된 발전기의 출력파형을 PCS로 변환하여 정현파의 AC 출력을 얻었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.161-165
• /
• 2007

Recently by the development of the electronic engineering technology various mobile devices are developed. But their operation time need to be extended although capacity of the batteries are limited. We focused our attention to the portable SOFC system. Because SOFC has the high efficiency and a lot of strongness in comparison with other kinds of fuel cells. In addition they can be built as a self/non-reformable system and single/dual chamber system. So We evaluated some types of SOFC theoretically, and compared the results from the fuel and performance efficiency point of view.

• Journal of Hydrogen and New Energy
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2023

A fuel handling process combined with a pressure swing adsorption system (PSA) was simulated to produce pure hydrogen with a purity greater than 99.97%. The simulation consists of two parts. The fuel processing part consisting of reformer and water-gas shift reaction was simulated with Aspen plus^®, and the hydrogen purification part consisting of PSA was simulated with Aspen Adsorption^®. In this study, the effect of reformer temperature and pressure on the total hydrogen production yield was investigated. Simulations were performed over a temperature range of 700 to 1,000℃ and a pressure range of 1 to 10 bar. The total hydrogen production yield increased with increasing temperature and decreasing pressure. The maximum hydrogen yield was less than 50% in the simulation and will be lower in the real process.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.421-429
• /
• 2018

We performed process and CFD simulations of a 100 kW fuel cell system. By process simulation, we derived the input flow rate of each unit process and the recycle diesel flow rate. Through CFD simulation considering the recycle diesel flow, more efficient operational condition was found. Using 6 desulfurize reactors, a TSA process for a 100 kW fuel cell system was successfully constructed. Heat interference between reactors was found to be negligible. These results will contribute to increasing the efficiency of fuel cell system and the developed desulfurizing module design will contribute to the clean petrochemical technology as well as fuel cell systems.

• Journal of Hydrogen and New Energy
• /
• v.24 no.6
• /
• pp.495-509
• /
• 2013

In this study, we develop a one-dimensional (1-D), two-phase, transient-thermal DMFC model to investigate the effect of methanol concentration fluctuation that usually occurs in active-type direct methanol fuel cell (DMFC) systems. 1-D transient simulations are conducted and time-dependent behaviors of DMFCs are analyzed under various DMFC operating conditions such as anode/cathode stoichiometry, cell temperature, and cathode inlet humidification. The simulation results indicate that the effect of methanol concentration fluctuation on DMFC performance can be mitigated by proper control of anode/cathode stoichiometry, providing a guideline to optimize operating conditions of active DMFC systems.

• Journal of Hydrogen and New Energy
• /
• v.23 no.5
• /
• pp.484-492
• /
• 2012

The TMS(Thermal Management System) heater in a fuel cell vehicle has been developed to prevent a decline of fuel cell durability and cold start durability. Main functions of the COD(Cathode Oxygen Depletion) heater are depletion of oxygen in a cathode as heat energy and consumption of electric power for rapid warming up of a fuel cell stack. This paper covers subjects including the design specification of a heater, heater controller for detection of overheat and reliability assessment including coolant pressure cycle test of a heater. To verify the design concept, burst pressure and deformation analysis of plastic housing were carried out. Also, temperature distribution analysis of heater surface and coolant inside of housing were carried out to verify the design concept. By designing the plastic housing instead of a steel housing, the 30% weight lightening and 50% cost reduction were attained. A module-based design of a TMS system including a heater or reducing the watt density of a heater is a problem to be solved in the near future work.

• Membrane Journal
• /
• v.33 no.3
• /
• pp.127-136
• /
• 2023

In this study, the electrochemical performance of a 5-layer fuel cell stack using silica composite membranes as polymer electrolyte membranes was evaluated. It was observed that the flow rate of the fuel gases plays a crucial role in stack performance, particularly being mainly dependent on the flow rate of hydrogen. Increasing the flow rate of oxygen resulted in negligible changes in performance, whereas an increase in the flow rate of hydrogen demonstrated performance improvements. However, this led to an imbalance in the ratio of hydrogen to oxygen flow rates, causing significant degradation in stack performance and durability. A decline in stack performance was also observed over time due to the degradation of stack components. This phenomenon was consistently observed in individual unit cells. Based on these findings, it was emphasized that, in addition to optimizing the performance of each component during stack operation, it is important to optimize design and operating conditions for uniform flow rate control. Lastly, the developed silica composite membrane was assessed to have sufficient performance for application in actual fuel cell systems, exhibiting a performance of over 25 W based on maximum power.

• Journal of Hydrogen and New Energy
• /
• v.30 no.4
• /
• pp.303-311
• /
• 2019

Reversible solid oxide fuel cell (RSOFC) has become a prospective device for energy storage and hydrogen production. Many studies have been conducted around the world focusing on system efficiency improvement and realization. The system should have not only high efficiency but also a certain level of simplicity for stable operation. External waste steam utilization was proved to remarkably increase the efficiency at solid oxide electrolysis system. In this study, RSOFC system coupled with waste steam was proposed and optimized in term of simplicity and efficiency. Ejector for fuel recirculation is selected due to its simple design and high stability. Three system configurations using ejector for fuel recirculation were investigated for performance of design condition. In parametric study, the system efficiencies at different current density were analyzed. The system configurations were simulated using validated lumped model in EBSILON(R) program. The system components, balance of plants, were designed to work in both electrolysis and fuel cell modes, and their off-design characteristics were taken into account. The base case calculation shows that, the system with suction pump results in slightly lower efficiency but stack can be operated more stable with same inlet pressure of fuel and air electrode.

• Journal of Hydrogen and New Energy
• /
• v.26 no.2
• /
• pp.156-163
• /
• 2015

The fuel cells have been investigated in the applications of marine as the high efficient and eco-friendly power generating systems. In this study, modeling of IR Type molten carbonate fuel cell (Internal Reforming Type molten carbonate fuel cell) has been developed to analyze the feasibility of thermal energy utilization. The model is developed under Aspen plus and used for the study of system performances over regarding fuel types. The simulation results show that the efficiency of MCFC system based on NG fuel is the highest. Also, it is also verified that the steam reforming is suitable as pre-reforming for diesel fuel.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.98.1-98.1
• /
• 2011

전 세계적으로 대표적인 대중교통으로 천연가스버스가 운행 중에 있으며, 천연가스의 저장을 위하여 대부분의 차량이 복합용기를 사용하고 있다. 또한 친환경자동차로 개발되고 있는 수소연료전지자동차도 수소 저장용으로 복합용기를 적용하여 상용화를 추진 중에 있다. 복합용기의 상용화가 증가하면서 복합용기의 안전성 확보가 가장 중요한 이슈가 되고 있다. 기체상태의 고압가스를 교통수단에 적용하기 위하여, 저장매체인 고압복합용기의 안전성 및 기술 확보를 위한 기술개발과 안전기준의 확립을 위한 기준개발이 미국, 유럽, 일본 등 다수의 국가에서 진행되고 있다. 현재 복합용기의 안전성을 확인하는 기준은 각 나라의 기준에 따라 진행되고 있으며 천연가스자동차용 저장용기 국제표준으로는 ISO 11439가 적용되고 있다. 수소연료전지자동차용 수소용기의 안전기준은 아직 확립되지 않은 상태이며, 개발된 초안으로는 국제규정으로 UN ECE R No.79 및 국제기술표준으로 ISO/TS 15869가 있다. 개발 중인 국제기준 및 국내기준에서 가장 취약한 부분이 화염시험이다. 화염시험은 자동차에 화재가 발생했을 경우 용기의 폭발을 막기 위하여 안전밸브가 정상적으로 작동하는 지를 확인하는 시험이다. 하지만 현재의 시험방법으로는 자동차에서 발생하는 국부적인 화염에 대한 안전성을 확인하기가 어려운 실정이다. 본 연구에서는 국내의 화염시험기준을 개발하기 위해 수행된 화염시험에 대한 결과와 화염시험장치를 제안하고자 한다.