• Applied Chemistry for Engineering
• /
• v.2 no.4
• /
• pp.363-371
• /
• 1991

The catalytic performance and availability of heteropoly compounds for the conversion of methanol to hydrocarbons have been studied. The effects of reaction conditions such as reaction temperature, methanol partial pressure and residence time and the effects of ion-exchange of the catalysts were examined for enhancing the yield of hydrocarbons and the selectivity of low olefins. Their acid strength depended on the kind of countercation, and the yield of hydrocarbons and the selectivity for propylene to propane were closely related to the electronegativity of the corresponding countercations. In contrast to the other heteropoly compounds, the ammonium salt showed a considerably high catalytic activity and a high selectivity for paraffins to low olefins.

• Microbiology and Biotechnology Letters
• /
• v.17 no.5
• /
• pp.421-428
• /
• 1989

A soil bacterium synthesizing an extremely viscous biopolymer was isolated and identified as Pseudomonas delafieldii. The optimal pH and temperature for the growth were 6.5 and 3$0^{\circ}C$, respectively. Maximum specific growth rate was 0.24 h$^{-1}$. The specific polysaccharide productivity, growth yield and product yield were 6.25 mg/g-cell/h, 54.5% and 38.39%, respectively. The polysaccharide was presumed to be $\beta$-glucan containing glucose and gluconolactone (1.9：1.0 in molar ratio) and 1.35 % acetyl group, Element analysis showed that it contained carbon (31.85%) and hydrogen (5.15%). The weight average molecular weight by GPC was 5.64$\times$10$^7$. The intrinsic viscosity was 42.84 dl/g.

• Resources Recycling
• /
• v.11 no.2
• /
• pp.14-19
• /
• 2002

PVC sheet was treated in O~10M NaOH solutions at $80~150^{\circ}C$ for O~7 hour, in order to study the leaching phenomena of plasticizer. The yield of phthalic acid produced by hydrolysis of DOP was increased greatly with increasing temperature and NaOH concentration by accelerating of alkali catalyst. The yield of phthalic acid was reached ca. 100% in 10M NaOH at $150^{\circ}C$ over 3 hours. Therefore, the plasticizer containing 30% in PVC sheet could be hydrolyzed in alkali solutions before the occurrence of dehydrochlorination. Besides, in the thermal reaction, the pores were produced in the PVCsheet by the hydrolysis of DOP.

• Journal of the Korean Chemical Society
• /
• v.52 no.1
• /
• pp.23-29
• /
• 2008

Simple Keggin type tungsten and molybdenum heteropoly acids, H3PW12O40 and H3PMo12O40, were usedas water-tolerant catalysts for the oxidation of alcohols with 34% hydrogen peroxide in normal drinking water. Accordingto our findings, H3PW12O40 may be used as a simple, effective, and cheap catalyst for this type of transformation in nor-mal drinking water with excelent yields. Efects of diferent solvents at 25-80oC and changing concentration of catalystand substrate on the reaction progress were also studied.

• Korean Chemical Engineering Research
• /
• v.43 no.6
• /
• pp.668-674
• /
• 2005

It is reported that a method for the hydrogen production from the propane decomposition using carbon black as a catalyst is more effective than from the methane decomposition. Since the by-products like CO and $CO_2$ are not produced by the direct decomposition of propane, it is considered as an environmentally sustainable process. In this study, hydrogen was produced by the direct decomposition of propane using either commercial activated carbon or carbon black at atmospheric pressure in the temperature range of $500-1,000^{\circ}C$. Resulting products in our experiment were not only hydrogen but also several by-products such as methane, ethylene, ethane, and propylene. Hydrogen yield increased as temperature increased because the amount of those by-products produced in the experiment was inversely proportional to temperature. The achieved hydrogen yield at $750^{\circ}C$ with commercial DCC N330 catalyst was 22.47％ in this study.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.527-527
• /
• 2009

1세대 바이오디젤인 fatty acid methyl ester(FAME)의 문제점을 극복하기 위하여 많은 연구가 진행 중 이다. 소위 차세대 바이오디젤은 triglyceride의 산소 화합물을 제거하여 정유 공정을 통해 생산된 디젤과 동일한 특성을 지닌 탄화수소로 전환시킨 오일이다. 이를 위하여 수소를 첨가하여 산소를 제거 시키는 Hydrodeoxygenation(HDO) 반응이 필요하다. 고온($300-400^{\circ}C$), 고압(50-100 bar)의 혹독한 조건에서 높은 수율과 안정성을 보이는 촉매 개발이 필요하다. 이를 위하여 반응물중의 산소를 효과적으로 제거하기 위하여 산소 전달능이 뛰어난 $CeO_2$ 담체에 열안정성을 높이는 $ZrO_2$를 조합한 $Ce-ZrO_2$ 담체를 선정하였으며 수소첨가 탈산소 반응에 활성을 나타낼 것으로 예상되는 니켈을 활성성분으로 선정하였다. 본 연구에서는 15%Ni-$Ce_{(1-x)}Zr_{(x)}O_2$ ($0{\leq}x{\leq}1$)촉매를 공침법(co-precipitation)으로 제조하였으며 $500^{\circ}C$에서 소성하였다. 촉매 특성분석은 XRD, BET, H2-TPR을 이용하였다.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.757-761
• /
• 2019

The catalytic yields of POM to hydrogen over M(1)-Ni(5)/AlCeO₃ (M = La, Ce, Y) were investigated using a fixed bed flow reactor under atmosphere. The crystal phase behavior of reduced La(1)-Ni(5)/AlCeO₃ catalysts before and after the reaction were studied via XRD analysis. FESEM and EDS analyses were further performed to show the uniformed distribution of La, Ni, and Ce metal particles on the catalyst surface. XPS results showed O^2-, O₂^2- species and metal ions such as Ce³⁺, Ce⁴⁺, La³⁺ and Ni²⁺ etc. were on the catalyst surface. When 1 wt% of La was added to Ni(5)/AlCeO₃ catalyst, Ni2p_3/2 and Ce3d_5/2 increased 52.7 and 6.3%, respectively. The yield of hydrogen on the La(1)-Ni(5)/AlCeO₃ catalyst was 89.1%, which was much better than that of M(1)-Ni(5)/AlCeO₃ (M = Ce, Y). As Ce⁴⁺ ions of CeO₂ produced by the reaction of AlCeO₃ with oxygen were substitute to La³⁺, it made oxygen vacancies in the lattice and further improved the hydrogen yield by increasing the dispersion of Ni atoms with strong metal-support interaction (SMSI) effect.

• Korean Chemical Engineering Research
• /
• v.44 no.4
• /
• pp.363-368
• /
• 2006

This study selected the optimal catalyst for the process of producing $C_9$-alcohol by hydrogenating $C_9$-aldehyde, and carried out an experiment in order to establish the operating condition for maximizing the yield of $C_9$-alcohol. The BET surface area and the specific area of copper were most excellent in $CuO/ZnO/Al_2O_3$ (60:30:10 wt％) catalyst produced using acetate as a precursor of copper and $Na_2CO_3$ as a precipitant, and the catalyst also showed the highest performance in $C_9$-aldehyde hydrogenation. Using a trickle bed reactor loaded with optimized catalyst, we attained 94.1 wt％ yield of $C_9$-alcohol under the condition of $175^{\circ}C$, 800 psi and $WHSV=3hr^{-1}$. According to the result of comparing with other catalysts used in the hydrogenation of aldehyde, the catalyst showed similar performance to that of Ni/kieselghur and higher than that of $Cu-Ni-Cr-Na/Al_2O_3$ and $Ni-Mo/Al_2O_3$. According to the result of examining the stability of the catalyst through a long-term catalysis test, the yield of $C_9$-alcohol decreased slowly after around 72 hours due to the increasing production of high boiling-point byproducts.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.478-482
• /
• 2021

The catalytic yields of partial oxidation of methane (POM) to hydrogen over Ln(1)-Ni(5)/SBA-15 (Ln = Dy, Eu, Pr, and Tb) were investigated in a fixed bed flow reactor under atmosphere. As 1 wt% of Eu was added to Ni(5)/SBA-15 catalyst, the O1s and Si2p core electron levels of Eu(1)-Ni(5)/SBA-15 showed the chemical shift by XPS. XPS analysis also demonstrated that the atomic ratio of O1s, Ni2p_3/2, and Si2p increased to 1.284, 1.298, and 1.058, respectively, and exhibited O^-, and O^2- oxygen and metal ions such as Eu³⁺, Ni⁰, Ni²⁺, and Si⁴⁺ on the catalyst surface. The yield of hydrogen on the Eu(1)-Ni(5)/SBA-15 was 57.2%, which was better than that of Ln(1)-Ni(5)/SBA-15 (Ln = Dy, Pr, and Tb), the catalytic activity was kept steady even 25 h. As 1 wt% of Eu was added to Ni(5)/SBA-15, the oxygen vacancies caused by strong metal-support interaction (SMSI) effect due to the strong interaction between metals and carrier are made. They are resulted in increasing the dispersion of Ni⁰, and Ni²⁺ nano particles on the surface of catalyst, and are kept catalytic activity.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.242-246
• /
• 1999

For the fluorination of $CF_2Cl_2$, the yield of $CF_4$ was found to be increased with the contact time and the reaction temperature. When the mole ratio of HF/$CF_2Cl_2$ is 3 or above, the yield of $CF_4$ was attained to 100% at $370^{\circ}C$ and contact time of 3 seconds. In the case of the fluorination of $CCl_4$ with HF, the yield of $CF_4$ was obtained above 90% at the reaction temperature of $500^{\circ}C$, the contact time of 3 seconds, and the mole ratio of HF/$CCl_4$ of 5.