• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.243-250
• /
• 2009

Pravastatin sodium, competitive inhibitors of HMG-CoA(3-hydroxy-3-methylglutaryl coenzyme A) reductase, is produced from the culture broth of Streptomyces carbophilus KCCM 10370, The production of Pravastatin sodium was increased about 45 fold compared to wild type by UV mutation. Production of Pravastatin was also improved by continuous feeding of Compactin sodium to 24% and bioconversion ratio was also increased to 4.3% by intermittent addition. In main culture, concentration of Compactin sodium was kept less than 0.1%(w/v) under continuous feeding of Compactin sodium then product was 0.49% and bioconversion was 70%. After finishing the fermentation, Pravastatin was purified by various chromatographies such as Diaion HP20 resin column, Partition, and ODS(Octa-Decylsilyl Silicagel) resin column with a final yield of 70~72% and over 99.7% purity. The IR, UV, and NMR study of the purified Pravastatin sodium showed the same pattern as that of EP(European Pharmacopoeia).

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.26-32
• /
• 2004

Chemical compositions and chemical structure of lignin and alkali cooking condition and fiber length of red pepper were investigated and compared to those of woods. The chemical compositions of red pepper were higher component of extraction than that of wood. The contents of carbon and hydrogen of Klason lignin in red pepper were similar to that of pine and birch wood. On the other hand, the contents of oxygen and nitrogen of Klason lignin in the red pepper were higher than that of wood. The result of nitrobenzene oxidation shows that Klason lignin of red pepper was similar to lignin of softwood. The best alkali cooking condition of red pepper was 0.2%-anthraquinone, active alkali of 20% and liquor ratio of 1:7. The fiber length of red pepper was about 0.47 mm. Therefore, the red pepper fiber will be able to use special purpose of short fiber.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.153-160
• /
• 2023

In this study, biochar was produced from biomass waste, and its methylene blue adsorption capacity was evaluated. The major components of the biomass were cellulose, hemicellulose, and lignin. Ash content was high in waste wood. Carbonization yield decreased as carbonization temperature increased, as did hydrogen and oxygen content, but carbon content increased. Increased carbonization temperature also increased the specific surface area and micropores of biochar. At 600 ℃, biochar had the highest specific surface area (216.15~301.80 m² /g). As a result of methylene blue adsorption on biochar carbonized at 600 ℃, oak, waste wood, and pruned apple tree branches fit the Freundlich model, while pruned peach tree branches fit the Langmuir model. In the adsorption kinetics of methylene blue on biochar, oak and pruned peach tree branches fit a pseudo-first-order model, while waste wood and pruned apple tree branches fit a pseudo-second-order model.

• Clean Technology
• /
• v.30 no.1
• /
• pp.62-67
• /
• 2024

In this study, an alkali metal Na was introduced into iron-based catalysts used in the carbon dioxide-based Fischer-Tropsch process by wet impregnation and physical mixing methods to compare their performance. The as-prepared catalysts were evaluated for reactivity at 3.5 MPa, 330 ℃, feed ratio of H₂/CO₂ = 3 with a space velocity of 4,000 mL h^-1 g_cat^-1. Comparing the two catalysts, it was found that Na was uniformly distributed throughout the catalyst when wet-impregnated, but Na for physically mixed catalyst was relatively located on the surface of the catalyst. In addition, the wet-impregnated catalyst showed higher liquid hydrocarbon (C₅₊) yield and lower CO selectivity. In conclusion, the effect of Na distribution in the catalyst on the reaction was identified and can be controlled by the introduction method.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.1
• /
• pp.1-11
• /
• 2017

Bio-oil has attracted considerable interest as one of the promising renewable energy resources because it can be used as a feedstock in conventional petroleum refineries for the production of high value chemicals or next-generation hydrocarbon fuels. Zeolites have been shown to effectively promote cracking reactions during pyrolysis resulting in highly deoxygenated and hydrocarbon-rich compounds and stable pyrolysis oil products. In this study, catalytic pyrolysis was applied to upgrade bio-oil from yellow poplar and then fuel characteristics of upgraded bio-oil was investigated. Yellow Poplar(500 g) which ground 0.3~1.4 mm was processed into bio-oil by catalytic pyrolysis for 1.64 seconds at $465^{\circ}C$ with Control, Blaccoal, Whitecoal, ZeoliteY and ZSM-5. Under the catalyst conditions, bio-oil productions decreased from 54.0%(Control) to 51.4 ~ 53.5%, except 56.2%(Blackcoal). HHV(High heating value) of upgraded bio-oil was more lower than crude bio-oil while the water content increased from 37.4% to 37.4 ~ 45.2%. But the other properties were improved significantly. Under the upgrading conditions, ash and TAN(Total Acid Number) is decrease and particularly important as transportation fuel, the viscosity of bio-oil decreased from 6,933 cP(Control) to 2,578 ~ 4,627 cP. In addition, ZeoliteY was most effective on producing aromatic hydrocarbons and decreasing of from the catalytic pyrolysis.

• Journal of the Korean Chemical Society
• /
• v.39 no.7
• /
• pp.564-571
• /
• 1995

5-Amino-2H-1,2,4-thiadiazoline-3-one has been prepared from 2-thiobiuret through a oxidative cyclization under basic hydrogen peroxide condition. Lactam-lactim tautomerism of 5-amino-2H-1,2,4-thiadiazoline-3-one has been examined by spectroscopic methods and ab initio molecular orbital calculation. These results were shown that 5-amino-2H-1,2,4-thiadiazoline-3-one exists as lactam form. Reaction conditions for alkylating 5-amino-2H-1,2,4-thiadiazoline-3-one with alkyl halides in the presence of various bases were studied in DMF and $H_2O$-THF two phase system. $Li_2CO_3$ base in DMF method gave best result in this investigation. The alkylation has been taken place at N-2 position. The identification of the product is confirmed by spectral data of IR, $^1H$ NMR and $^13C$ NMR and the comparison of authentic sample, 5-amino-2-methyl-1,2,4-thiadiazolidine-3-one, obtained from the oxidative cyclization of 5-methyl-2-thiobiuret.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.224-228
• /
• 2015

The carbon precursor pitch from pyrolyzed fuel oil (PFO), by-product of Naphta cracking process (NCC), was prepared through heat and UV irradiation treatments with various concentrations of $AlCl_3$, which is a new pitch preparation method. The reformed pitches were characterized by measuring their elemental composition, chemical structure of components, molecular weight distribution, and softening point. The oxygen contents of reformed pitch increased as increasing $AlCl_3$ amounts on the other hand, the carbon and hydrogen contents were not nearly changed. UV irradiated reformed pitches were composed of more aromatic carbon compounds than that of using only heat-treatment without any UV irradiation. The addition of $AlCl_3$ catalyst was ineffective on the aromaticity of reformed pitches. The softening point of prepared pitches was in the range of $103.3{\sim}168.9^{\circ}C$. Also the yield of prepared pitch increased from 48% to 80% when 5 wt% of $AlCl_3$ was added during the heat and UV irradiation reforming. It is expected that the UV irradiation reforming method can be practical and helpful to produce high yields of pitches with diverse properties.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.5
• /
• pp.684-688
• /
• 2003

The objective of this study was to search for the best strain as a source of L- $\alpha$-glycerophosphate oxidase (GPO) production and to establish the process technology for the purification of GPO on an industrial scale. The GPO was produced by culturing Streptococcus faecium, and purified by ammonium sulfate, DEAE-cellulose and hydroxyapatite chromatography. The relative activity was 60 units/L for 5. faecim ATCC 12755, 65 units/L for 5. faecium ATCC 19634, and 67 units/L for 5. faecium $M_{74}$.LC, respectively. The optimum condition for fermentation was $37^{\circ}C$ for temperature, 300 rpm for stir rate, 0.5 L/min for aeration rate and 17 hours. The main culture medium prepared by the modified AC medium. AC medium consists of 0.1% glucose, 0.2% glycerol, 1.0% tryptone and 1.0% yeast extract, 0.5% $K_2HP0_4$, pH 7.0. The GPO was purified by ammonium sulfate fractionation and ion exchange column chromatography, The yield and purity were 17.2% and 5.3 fold, respectively.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.47-52
• /
• 2013

In this study, the catalytic performance and characterization of $Ni/Ce_xZr_{1-x}O_2$ were investigated using an autothermal reforming (ATR) process for hydrogen production. The $Ni/Ce_xZr_{1-x}O_2$ catalysts were prepared using the following methods: the water method (CZ-W), urea water method (CZ-UW) and urea, water and ethanol method (CZ-UWA). The performance of $Ni/Ce_xZr_{1-x}O_2$ catalysts in autothermal reforming of propane for hydrogen production was studied in a fixed-bed flow reactor. Reaction tests were conducted by using a feed of $H_2O/C_3H_8/O_2$=3/1/0.37 and $300{\sim}700^{\circ}C$. The CZ-UW and CZ-UWA catalysts showed higher propane conversion and hydrogen yield than the CZ-W catalyst. The activity test confirmed that the improvement in the water-ethanol catalyst was due to the low level of carbon deposition. SEM showed that the surface carbon consisted of clusters on the used CZ-UW catalyst, which is incontrast to the nano-fiber morphology observed on the used CZ-UWA catalyst. It was found that the amount of carbon deposition depends on the preparation method. Especially the $Ni/Ce_{0.75}Zr_{0.25}O_2$ was showed higher propane conversion and hydrogen yield than the other catalysts. Also TGA showed that the resistance of carbon deposition increase to Co addition.

• Clean Technology
• /
• v.23 no.3
• /
• pp.294-301
• /
• 2017

Air pollution associated with the $NO_x$ emission from the ship engines is becoming one of the major environmental concerns these days. As the regulations on ship pollutants are strengthened, the wet absorption method, for controlling complex pollutants in a confined space, has the advantage of simultaneously removing various pollutants, but the low solubility of nitrogen monoxide is drawback. In this study, for improving existing denitrification scrubber system, NO oxidation process by hydroxyl radical produced from irradiating UV light on $H_2O_2$ is suggested and the $H_2O_2$ decomposition rates and hydroxyl radical quantum yields were measured to find the optimum condition of $H_2O_2$ photolysis reaction. As a result, the optimum quantum yield and photolysis rate of $H_2O_2$ were 0.8798, $0.6mol\;h^{-1}$ at 8 W, 2 M condition, and oxidation efficiency of 1000 ppm NO gas was 40%. In batch system, NO removal efficiency has a range of 65.0 ~ 67.3% according to input gas concentration of 100 ~ 1500 ppm. This results indicate that the scrubber system using hydrogen peroxide photolysis can be applied as air pollution prevention facility of ship engines.