• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.7
• /
• pp.449-455
• /
• 2016

Fog causes economic losses in transportation. It also results in health problems when it is combined with air pollutants. Considerable research efforts have focused on developing fog removal systems. However, most systems operate themselves after monitoring the fog. Additionally, continuous energy supply and maintenance are required to retain the fog-removal efficiency of the system. This study included the demonstration of a moss filter (a polyolefin mesh interlaced with moss) as a fog-removal method overcoming the limitations of the fog removal system. Three types of mosses with different surface structures were investigated to elucidate the relation between the moisture absorption rate and the structures. Among the different moss types, Hypopterygium japinicum showed the highest efficiency based on the smallest pore diameter and the largest total pore area. The visibilities with the moss filter and the polyolefin mesh were compared to perform the fog removal tests. The moss filter could provide a cost-effective and eco-friendly fog removal system with sustainability.

• Korean Journal of Food Science and Technology
• /
• v.33 no.5
• /
• pp.540-544
• /
• 2001

The quality characteristics for brown rice flake were examined using eight kinds of brown rice cultivars such as Shinsunchalbyeo, Shinsunchal giant embryonic rice, Whachungchalbyeo, Whachungchal giant embryonic rice, Whachungbyeo, Whachung giant embryonic rice, Nampungbyeo, and Nampung giant embryonic rice. The qualities of grain such as the released reducing sugar, water absorption rate and hardness of grain are examined with different temperature and time at sedimentation in water and pressed grain-brown rice flake are prepared after sedimentation in $60^{\circ}C$ water for 5 hours. The brown rice flakes prepared from the giant embryonic type rice cultivars showed higher expansion volume, lower hardness, more crispness, longer bowl life time and better taste than that prepare from normal type rice cultivars, which showed the giant embryonic type rice cultivars were appropriate for brown rice flakes. Among the giant embryonic type rice cultivars, the glutinous rice varieties were better to prepared the brown rice flakes than its normal rice cultivars. The water absorption index of flakes tested were positively correlated with expansion volume and bowl life hardness. From tested sensory evaluation were shown to be negatively correlated with water absorption index. Among the tested cultivars, Shinsunchal giant embryonic and Wachungchal giant embryonic rice were most appropriate for brown rice flakes preparation.

• Korean Journal of Food Science and Technology
• /
• v.53 no.6
• /
• pp.739-748
• /
• 2021

This study focuses on the use of rice in the production of gluten-free rice udon (GFU) through an optimized mixing ratio, using the Box-Behnken response surface methodology (RSM). Different additional levels of rice flour (A, 40-60 g), acetylated distarch adipate (B, 10-20 g), and trehalose (C, 0-3 g) were used as variables, while water absorption level, volume, cooking loss, solid yield, lightness, texture properties, proximate compositions of GFU and turbidity of cooking water were set as responses in the RSM design model. The optimum mixing ratio for the preparation of gluten-free rice udon was obtained for 60.00 g of rice flour, 18.81 g of acetylated distarch adipate without the addition of trehalose. The response values of the optimized samples were water absorption (60.94%), volume (34.94%), turbidity of the cooking water (0.37), cooking loss (4.77%), solid yield (1.55 g), lightness value (70.04), hardness (2.53 N), springiness (0.18), gumminess (10.45 N), chewiness (1.83 N), and cohesiveness (2.89). This study has shown that rice flour can replace wheat flour to manufacture udon at an optimized mixing ratio successfully derived by statistical estimation method.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.25-33
• /
• 2013

This study aims to investigate the film performance by physical properties of glue and gelatin in traditional paint(Dancheong). To do this, homemade, commercial glue and gelatin was selected and evaluated water reaction and weatherproof. The result, the highest gel strength, gelatin was better than acrylic acid ester resin, when compared with hygroscopic property and adhesive property. And that was better than in any others, when compared with water-proofing.

• Science of Emotion and Sensibility
• /
• v.20 no.2
• /
• pp.117-126
• /
• 2017

In this study, moisture transport characteristics for the woven and knitted fabrics made of 8 kinds of fiber materials using MMT (moisture management tester) were measured and discussed with the Bireck bt MMT and water evaporating rate (WER) measuring methods, which are vertical moisture transport methods. In addition, the drying property by MMT of the eight kinds of specimens was compared and discussed with the results measured by the vertical drying measurement. MMT experimental result which is horizental moisture transport appeared to be similar to the result of the Bireck method, which is the vertical moisture transport experiment. Absortion time measured from drip method of the fabrics made of the bamboo, linen, and cotton/nylon composite fabrics was short and thus they showed best wicking property, which was attributed to the low contact angle on the fabric surface and high porosity of the fabrics due to the staple yarn structure composed of the hydrophilic staple fibers. In drying property of the fabric specimens by MMT, maximum absorption radius of the dry-zone knit and bamboo woven fabrics were the highest and they showed the best drying property, which was a little different result compared with vertical drying measurement method. Half time of the drying rate in the MMT method was highly correlated with the fabric thickness and saturated moisture absortion rate and their regression coefficients were 0.9 and 0.88, respectively. This means that the knitted and woven fabric design technology for retaining good wicking and drying properties of the fabrics with thin fabric thickness is very important for obtaining high functional wear comfort fabrics. In addition, wicking and drying properties of the fabrics made of different fiber materials and with different yarns and fabric structures showed different results according to the measuring methods.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1596-1602
• /
• 2012

Eight rice cultivars grown in Korea were analyzed to investigate the quality of flour prepared using wet and dry grinding methods. The hardness of the kernel was related with starch damage following dry grinding but not following wet grinding. Although Chenmaai had the hardest steeped kernel, its flour exhibited minimal starch damage, a lower water absorption index (WAI), and a smaller difference between the RVA properties of wet and dry ground flour. However, Seolgan and Suweon517 are soft grains, and their flours had more starch damage and a higher WAI. In general, soft kernels produce better grinding characteristics. However, our wet grinding results indicated that grain hardness was not the main factor affecting the grinding characteristics. Even Chenmaai, with its hard kernels, had good grinding characteristics, whereas the softer kernels of Seolgan and Suweon517 did not show the appropriate grinding characteristics.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.1
• /
• pp.52-57
• /
• 2003

Nutritional compositions of the raw materials, such as well-milled rice, milled upland glutinous rice, milled barley, glutinous millet, SoRiTae, red beans and mung beans were analysed, and cooking characteristics and sensory attributes of mixed cereals were measured. Crude protein and crude fat in SoRiTae were 31.6% and 16.16%, respectively, and the highest among the raw materials. Crude ash was 3~11 times higher and crude fiber was 5~7 times higher in legumes than in grains. Iron content in SoRiTae was the highest as 7.8 mg/100 g, and calcium content was the highest as 71.0 mg/100 g in SoRiTae and mung beans. Phosphorus content was higher in glutinous millet and mung beans, and potassium content was greatly higher in legumes than in grains and the highest as 934 mg/100 g in red beans. Vitamin B$_1$ and B$_2$ contents were higher in legumes than in grains, and niacin content was the highest as 5.51 mg/100 g in mung beans and was 3.77 mg/100 g in glutinous millet. Water uptake of the raw materials increased greatly after 5 min of soaking in water and then stayed at the almost same level. Water uptake was the highest in SoRiTae and decreased in the order of milled barley, milled upland glutinous rice, glutinous millet and well-milled rice. Hardness was the lowest as 142.8 g/cm$^2$ in cooked SoRiTae, and the highest as 206.3 g/cm$^2$ in cooked milled barley compared with 169.4 g/cm$^2$ in cooked well-milled rice. Cooking time increased and hardness of cooked mixed cereals decreased with the increase of water added. Moisture content decreased, while crude protein, crude ash and crude fiber increased as the increase of mixing ratio of SoRiTae and red beans in mixed cereals. Lightness decreased, while red and blue color increased, and hardness increased with the increase of mixing ratio of SoRiTae and red beans. Sensory evaluation showed greater preference in terms of color, roasted nutty, sweet taste and overall acceptance in the cooked mixed cereals with 8 and 10% of SoRiTae and red beans.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.5
• /
• pp.616-621
• /
• 2017

The objective of this study was to investigate the physicochemical properties of domestic strong wheat flour (DSWF). Three commercial DSWFs (D1, D2, and D3) were compared with imported strong wheat flour (ISWF). DSWFs had higher moisture content, crude protein content, lightness, and whiteness than ISWF. DSWFs showed lower solvent retention capacity and water absorption index than ISWF. DSWFs also showed significantly higher water solubility index than ISWF (P<0.05). Setback values by rapid visco analysis were significantly higher in D1 and D2 than in ISWF and D3, which means ISWF and D3 were better in retarding retrogradation. Differential scanning calorimetry results showed that ISWF required 6.2 J/g of energy for phase transition, whereas DSWFs needed 6.67~7.13 J/g. The farinograph results showed that ISWF had higher water absorption, longer dough stability time, and significantly higher softening of dough at 20 min than DSWF (P<0.05). Dough resistance and extensibility were higher in ISWF than in DSWFs.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.132-135
• /
• 2005

The water absorption ratio was not affected by the planting dates. Hannamkong showed higher water absorption ratio than any sprout -soybean varieties. Soybean seeds produced from later planting showed higher germination percentage than those planted May 25. Pungsannamulkong, Eunhakong, Doremikong, and Someongkong showed over $90\%$ germination after two days, while Tawonkong and Hannamkong were lower, The germination ratio test of the soybean seeds at $25^{\circ}C$ is usually for 7 days. But, germination ratio test of seeds used for sprout-soybean is suitable for 3 days at $25^{\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.6
• /
• pp.269-273
• /
• 2001

The effect of $TiO_2$addition on the hydration reaction of MgO ceramics were studied after being heated at $1450^{\circ}C$. The pure MgO ceramics showed significant weight change after exposure to water due to the hydration reaction through the formation of $Mg(OH)_2$while $TiO_2$-added MgO ceramics did not. The $Mg_2TiO_4$phase were observed in the $TiO_2$-added MgO ceramics sintered at 145$0^{\circ}C$. Bulk density increased as the amount of $TiO_2$increased and the apparent porosity and water absorption decreased by $TiO_2$addition. The hydration resistance of MgO ceramics was found to be improved by $TiO_2$addition.