• Journal of Mushroom
• /
• v.8 no.3
• /
• pp.131-136
• /
• 2010

This study was performed to determine the optimal concentration of carbon dioxide, which effects mushroom growth and yield. It was shown that the periods for fruiting initiation, growth and harvest of Flammulina velutipes were increased when the $CO_2$ concentration was raised. In general, those characteristics were less affected in brown strains than in white ones. Especially brown strain ASI4103 was susceptible to changes in $CO_2$ concentration. Yields per bottle and individual mushroom weight also decreased in most strains when $CO_2$ levels increased. We were unable to designate any tendency in the number of fruiting bodies due to the large variation within each respective strain. Finally, water contents in the fruiting bodies were found to decline under high $CO_2$ concentrations.

• Culinary science and hospitality research
• /
• v.18 no.3
• /
• pp.227-238
• /
• 2012

This study was carried out to evaluate the effect of ${\beta}$-glucan on rheological properties of flour dough and quality characteristics of white pan bread. Flour dough and white pan bread fortified with ${\beta}$-glucans at levels of 0%, 3%, 6% and 9% w/w. Farinograph and amylograph were analysed for the rheological properties. Loaf volume and specific loaf volume, moisture content, texture and sensory evaluation were also analysed for the quality characteristics. In the farinograph test, water absorption and dough development time of doughs increased with increasing ${\beta}$-glucan content. Especially, water absorption of dough fortified with 9% of ${\beta}$-glucan showed 13% higher than the control. However, the addition of ${\beta}$-glucan to the dough decreased stability. There were no significant differences on gelatinization temperature and maximum viscosity temperature regardless of ${\beta}$-glucan contents, but maximum viscosity increased with increasing ${\beta}$-glucan contents. Loaf volume and specific loaf volume of white pan bread decreased slightly with increasing ${\beta}$-glucan contents. Moisture content showed higher value in tests than that of the control, and the one added with 6% revealed highest moisture content. In terms of texture analysis, the one added with 6% of ${\beta}$-glucan revealed softer than the others. There were no differences between the groups added with 3% and with 6% on sensory evaluation, but the one added with 9% obtained lowest scores. As a result of this study, 6% of ${\beta}$-glucan is considered the resonable level to prepare healthy white pan bread. ${\beta}$-glucan can also be used when making cake and cookies.

• Applied Biological Chemistry
• /
• v.20 no.1
• /
• pp.33-42
• /
• 1977

Asparagine biosynthesis by soybean sprouts grown under the dark conditions has been demonstrated. The amount of free asparagine synthesized in ten day-old soybean sprouts increases to 22.7% on the dry weight base. The effects of nitrogen compounds such as $NH_4Cl,\;(NH_4)_2SO_4$ and urea on asparagine synthesis during the sprouting were examined and the results showed that urea was more effective than other two compounds. Glutamine-dependent asparagine synthetase was partially purified (8.6 folds) through ammonium sulfate fractionation, followed by Sephadex G-150 gel filtration. The enzyme was very labile and required protection by thiol groups or high level of glycerol. The mixture of ATP and $Mg^{++}$ ion also stabilized the enzyme activity. The enzyme utilized glutamine more effectively than ${NH_4}^+$ as an amide donor for the formation of asparagine. The enzyme required L-aspartate (Km=3.1 mM), L-glutamine, ATP and $Mg^{++}$. It showed pH optimum of 7.5 and catalyzed the formation of ${\beta}-aspartyl$ hydroxamate in the presence of L-aspartate, ATP, $Mg^{++}$ and $NH_2OH$ in the reaction mixture.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.5
• /
• pp.858-864
• /
• 2001

This study was performed to investigate the effect of sodium lactate (SL, 60%) and a mixed fat replacer (FR) on the product quality and shelf-life effect of low-fat bologna sausage (LFBS) in a model system during refrigerated storage. Low-fat and regular-fat bologna sausages had pH values ranged from 6.15 to 6.30 and water activity values ranged from 0.95 to 0.96. LFBS had a moisture content of 74~76%, <2% fat and 14~15% protein, whereas regular-fat bologna had 60% moisture, 22% fat and approximately 12% protein in the final products. Expressible moisture (%) increased (p<0.05) in all bolognas, resulting in the soft texture, as the storage time (weeks) increased. LFBS manufactured with SL and a FR had lower (p<0.05) the cooking loss (%) and had higher (p<0.05) texture profile analysis (TPA) values than the regular-fat counterpart. As the sodium lactate level increased up to 5% in the formulation of LFBS, vacuum purge and TPA hardness values also increased (p<0.05), but thiobarbituric acid (TBA) values decreased (p<0.05). Total plate counts of LFBS were reduced (p<0.05) when the addition level of 60% SL solution was more than 3.3%. This result indicated that the increased level of SL (>3.3%) in the combination of a FR in the formulation of LFBS improved the product quality and did inhibit the total microbial growth of LFBS during storage, as compared to the control.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.2
• /
• pp.12-19
• /
• 2023

This study conducted an experiment with EC 1.0ms/cm ratio and excellent soil conditions for germination in ICT-based ginseng process cultivation. The first growth survey was conducted before transplantation of ginseng 1-year roots grown by seeding ginseng in the process cultivation, conventional cultivation and a second growth comparison survey was conducted after 3 months of growth. In the results, it was confirmed that ginseng grown in the process cultivation grew more than in the field. As a result of comparing the contents of 11 ginsenosides of 1-year and 2-year-old ginsenosides in the process cultivation and conventional cultivation ginseng, it was confirmed that the content of the process cultivation ginseng was higher than that of practice cultivation ginseng. In conclusion, conventional cultivation ginseng grows due to various factors under the natural cultivation environment, but process cultivation can secure the growth stability of ginseng by allowing stable soil and environmental control, so continuous research is needed in the future.

• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.228-234
• /
• 2007

The purpose of this study was to investigate quality characteristics of the meat batter containing dietary fiber extracted rice bran. The formulations of meat batters were manufactured in a model system with 2% raw rice bran and 2, 4, 6% levels of dietary fiber extracted rice bran, respectively. The proximate compositions of dietary fiber extracted rice bran were 53.27% dietary fiber, 6.10% crude fat, 22.99% crude protein, 12.78% crude moisture, and 7.41% crude ash. Compared with control of uncooked meat batter, the pH value of all treatments were significantly different(p<0.05). The pH of cooked meat batter were similar to uncooked meat batter. $CIE\;L^*-\;and\;CIE\;b^*-value$ of uncooked meat batter containing dietary fiber extracted rice bran were lower than control, but CIE $a^*-value$ of treatment was higher than those in control(p<0.05). All treatments had significantly lower cooking loss and emulsion stability than control(p<0.05). Compared with control, viscosity of the treatments containing dietary fiber extracted rice bran were observed significantly higher than those in control (p<0.05). And then hardness, cohesiveness, gumminess, and chewiness of treatments were higher than in control(p<0.05). Conclusively, the results of this study showed that addition of dietary fiber extracted rice bran affected the high quality properties of meat batter.

• Journal of the Korea Concrete Institute
• /
• v.18 no.1 s.91
• /
• pp.57-64
• /
• 2006

The crack presented in concrete structures causes a structural defect, the durability decrease, and external damages etc. Therefore, it is necessary to improve durability through the effort to control the crack. Fluosilicic acid($H_2SiF_6$) is recovered as aqueous solution which absorbs $SiF_4$ produced from the manufacturing of industrial-graded $H_3PO_4$ or HF. Generally, fluosilicates prepared by the reaction between $H_2SiF_6$ and metal salts. Addition of fluosilicates to cement endows odd properties through unique chemical reaction with the fresh and hardened cement. Mix proportions for experiment were modulated at 0.45 of water to cement ratio and $0.0{\sim}2.0%$ of adding ratio of fluosilicate salt based inorganic compound. To evaluate correlation of concrete strength and adding ratio of fluosilicate salt based inorganic compound, the tests were performed about design strength(21, 24, 27 MPa) with 0.5% of adding ratio of fluosilicate salt based inorganic compound. Applications of fluosilicate salt based inorganic compound to reduce cracks resulted from plastic and drying shrinkage, to improve durability are presented in this paper. Durability was evaluated as neutralization, chloride ion penetration depth, freezing thawing resistant tests and weight loss according reinforcement corrosion. It is ascertained that the concrete added fluosilicate salt based inorganic compound showed m ability to reduce the total area and maximum crack width significantly as compared non-added concrete. In addition, the durability of concrete improved because of resistance to crack and watertightness by packing role of fluosilicate salt based inorganic compound obtained and pozzolanic reaction of soluble $SiO_2$ than non-added concrete.

• Korean journal of food and cookery science
• /
• v.31 no.3
• /
• pp.304-317
• /
• 2015

For the production of pumpkin paste with respect to heating conditions, we steamed the pumpkin for roughly 15 min, heated it with high pressure treatment for 0 min (A), 10 min (B), 20 min (C), 40 min (D), and subsequently investigated the quality characteristics. Generally a significant difference was observed between the pumpkin paste treated with and without high-pressure heat. The values of water content, crude protein and crude fiber of the high-pressure heat-treated groups B, C, D were decreased compared with untreated group A. The soluble fiber in experimental group B sweet-pumpkin paste treated with high-pressure heat for 20 min was higher than the control, and the highest value at 2.02. Experimental group D sweet-pumpkin paste treated with high-pressure heat for 40 min was found to have a decreased soluble fiber content relative to the control. The L value for the color of the group A untreated control sweet-pumpkin paste (no high-pressure heating) decreased as the time increased from 10 min to 40 min, with L values of 50.33, 49.46, and 48.06, respectively. The b value for the color of the sweet-pumpkin paste also decreased, showing a significant difference. Taking into account all the results, we chose experimental group B in order to prepare sweet-pumpkin latte. We used 0.2% gum (xanthan gum, locust bean gum, guar gum) as a stabilizer. Sweet-pumpkin latte with xanthan and locust bean gum has a suspension stability effect that lasts 90 min. The L and b values of sweet-pumpkin latte with gums increase and a value decrease compared with the control. In terms of the overall acceptance of the sweet-pumpkin latte, the experimental group with xanthan gum scored the best.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.2
• /
• pp.125-139
• /
• 2010

Behavior of heavy metals and arsenic in the tailings of Songcheon Au-Ag mine was characterized via both mineralogical and geochemical methods. Mineral composition of the tailings was investigated by X-ray diffractometry, energy-dispersive spectroscopy, and electron probe micro-analyzer (EPMA) and total concentrations of heavy metals and arsenic and their chemical forms were analyzed by total digestion of aqua regia and sequential extraction method, respectively. The results of mineralogical study indicate that the tailings included mineral particles of resinous shape mainly consisting of galena, sphalerite, pyrite, quartz, and scorodite, and specifically socordite was identified in the form of matrix. EPMA quantitative analyses were performed to evaluate the weatherability of each mineral, and the results suggest that it decreased in the sequence of arsenopyrite > galena > sphalerite > pyrite. The weathering pattern of galena was observed to show distinctive zonal structure consisting of secondary minerals such as anglesite and beudantite. In addition, almost all of arsenopyrite has been altered to scorodite existing asmatrix and galena, sphalerite, and pyrite which have lower weatherability than arsenopyrite were identified within the matrix of scorodite. During the process of alteration of arsenopyrite into scorodite, it is likely that a portion of arsenic was lixiviated and caused a great deal of detrimental effects to surrounding environment. The results of EPMA quantitative analyses verify that the stability of scorodite was relatively high and this stable scorodite has restrained the weathering of other primary minerals within tailings as a result of its coating of mineral surfaces. For this reason, Songcheon tailings show the characteristics of the first weathering stage, although they have been exposed to the surface environment for a long time. Based on the overall results of mineralogical and geochemical studies undertaken in this research, if the tailings are kept to be exposed to the surface environment and the weathering process is continuous, not only hazardous heavy metals, such as lead and arsenic seem to be significantly leached out because their larger portions are being partitioned in weakly-bound (highly-mobile) fractions, but the potential of arsenic leaching is likely to be high as the stability of scorodite is gradually decreased. Consequently, it is speculated that the environmental hazard of Songcheon mine is significantly high.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.702-708
• /
• 2011

There are considerable areas of wet paddy fields in Korea that requires improvement of its drainage system. In poorly drained sloping paddy fields, upland crops can be damaged by either rainfall or capillary rise of the water table caused by percolating water beneath the upper fields during summertime rainy season. The purpose of this study is to evaluate excess water stress of soybean yield by drainage systems. Four drainage methods namely open ditch, vinyl barrier, pipe drainage and tube bundle were installed within 1-m position at the lower edge of the upper paddy fields. Stress Day Index (SDI) approach was developed to quantify the the cumulative effect of stress imposed on a soybean yield throughout the growing season. SDI was determined from a stress day factor (SD) and a crop susceptibility factor (CS). The stress day factor is a measure degree and duration of stress of the ($SEW_{30}$). The crop susceptibility factor (CS) depends of a given excess water on crop stage. The results showed that SDI used to represent the moisture stress index was most low on the pipe drainage 64.75 compared with the open ditch 355.4, vinyl barrier 271.55 and tube bundle 171.55. Soybean grain yield increased continuously with the rate of 3% in Vinyl Barrier, 32% in Pipe Drainage and 16% in Tube Bundle.