• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.6
• /
• pp.79-88
• /
• 1998

This study was conducted to measure the moisture content of soil using RF impedance in the range of 1 to 30MHz. Considering the water potential flow in the soils, two types of sensor such as parallel cylinder and perpendicular plate type were fabricated and tested. The capacitance and resistance of sonsors for soil samples having moisture content range of 2 to 27% were measured by Q-meter (HP4342). The higher soil moisture content was and the larger soil bulk density was, the more the capacitance of sensors increased. To eliminate the effect of bulk density on measuring soil moisture content using RF impedance, two kinds of model having the density independent functions such as the ratio of capacitance change to conductance change and weight of water and dry soils respectively were developed and estimated by regression analysis.

• Journal of Animal Environmental Science
• /
• v.8 no.3
• /
• pp.135-144
• /
• 2002

A computer simulation was carried out to investigate the optimum capacity of liquid manure tank spreader which is used as a tractor attachment. Soil physical properties, such as soil moisture content, bulk density, soil hardness and soil types were measured in the 10 major rice production area for computer simulation. Mathematical model which include soil physical properties and vehicle factor was used for computer simulation. Most of the soil type of the investigated area was sandy clay loam. Soil moisture content ranged between 30 and 40% mostly. Soil bulk density was in the range of 1,500 to 1,700 kg/$m^3$. Soil hardness ranged between 1 to 18 $cm^2$. Soil hardness incorporate the effects of many soil physical properties such as soil moisture content, soil type and soil bulk density, and so the range of soil hardness is greater than any other physical properties. The capacity of liquid manure tank spreader was above 3,000 kg$_{f}$ for the most of the investigated areas, and mostly in the range of 4,000 to 6,000 $kg_f$ depending upon the slip. But for the soft soil area such as Andong and Asan, the tractor itself has mobility problem and shows no pulling force for some places. For this area, the capacity of liquid manure tank spreader ranged between 1,000 and 2,000 $kg_f$ mostly, so the capacity of liquid manure tank spreader should be designed as a small capacity trailer compared to the other area.mpared to the other area.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1988.07a
• /
• pp.16-17
• /
• 1988

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1988.02a
• /
• pp.58-59
• /
• 1988

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2001.05a
• /
• pp.40-41
• /
• 2001

그림1과 2이 결과로 볼 때 수분과 영양분의 공급없이 담체 자체만으로는 암모니아와 황화수소의 제거는 어렵고 현장 적용가능성을 볼 때 10L의 크기의 밴치반응기의 최대 풍량인 332(/h)의 공간속도에서도 암모니아 및 황화수소 제거에 높은 효율을 보이고 있어 소규모 처리에 적용가능성을 시사해 볼수 있고 반응장치의 확대시(scale up) 높은 처리용량이 기 대된다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.85-94
• /
• 1998

Due to relatively high permittivity of water in soils, we placed the soil condenser into soils to measure the soil moisture content. The soil condenser was made with two insulated iron sticks. The capacitance of the soil condenser was determined by the pulse period from RC type oscillation circuit and the highest voltage output accepting 10MHz pulse. After zero point adjustment, the measured relative capacitance percentage (RCS) to the standard condenser obtained by the oscillation circuit almost linearly correlated with the end depth of the sensor submerged in water. The RC type oscillation was disturbed by many sensor installed in a close distance in one place, presumably resulting in that the sensor sticks played as a interfering antennas generating or accepting electron waves from them. The temperature dependance of the output from the sensors could be corrected through experimentally determined revision function. Although lineal correlation was found between soil moisture and RCS, users should derive their own correlation function for every sensor to measure soil moisture, because the outputs were influenced by the installation depth and layout in the soil. The voltage type sensor responded inversely with soil moisture content and so was not suitable to the accurate measurement of soil moisture, but allows high economic benefit in various application such as simplified measurement of soil moisture and irrigation line control because of its low component count. The voltage type moisture sensor could be reinforced by relay controlling circuit to open and to close the solenoid valves respectively at optimal limits of the least and the most soil moisture according to user's adjustment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.2
• /
• pp.124-130
• /
• 2004

This study was carried out to evaluate the effects of condensed molasses soluble (CMS) treatment on the mineralization of N, chemical properties and soil microbial population under the incubation condition with unsaturated water content during the 7 weeks at $25^{\circ}C$ in the different levels of CMS application. The results indicated that the total nitrogen content of soil was increased with increasing application rate of CMS and this trend was maintained up to 7 weeks. With CMS treatment content of $NH_4-N$ was gradually decreased. However, the content of $NO_3-N$ in the soil was gradually increased with incubation time due to the nitrification under the unsturated water condition. The CMS treatment increased the microbial populations such as bacteria, actinomycetes and fungi, which may be due to the availability of more nutrients such as amino acids, sugars and other minor elements from CMS. The pH of soil was found to be reduced by the addition of CMS, Whereas, electrical conduvtivity of soil was correspondingly increased with increasing application rate of CMS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.373-381
• /
• 2016

To investigate the influence of hand cream of domestic and foreign brands on the purchase tendency, a survey was conducted on hand cream application, purchase tendency, and perception of 105 women in a metropolitan area. Market research was then conducted to compare the hand cream cost, quantity, and total substance, and the hand creams were sorted according to high-price and low-price, and foreign brand and domestic brand, and a clinical demonstration was conducted by back-hand application on 17 recipients to analyze the moisture and skin oil differences and the moisture endurance. As a result, the percentage of subjects who perceived that the price and brand of hand cream affects the quality was higher than those who did not, and the hand cream prize per 1mg (g) varied as much as fourfold among the high-price and low-price, and among foreign and domestic brands. The result of the total substance comparison, glycerin the moisturizer and cetearyl alcohol the skin conditioner were included in all hand creams. As a result of the clinical demonstration, the difference in moisture and skin oil difference and moisture endurance between the high-price and low-price and foreign brand did not show a statistically significant difference. These results show that there are no relationships between skin moisture and sebeum of the brand. Therefore, considering that hand cream is a highly consumptive product that is used multiple times on a daily basis, these results might provide fundamental data that could contribute to the increase in hand cream product quality by determining the consumers' needs.

• Journal of Venture Innovation
• /
• v.5 no.2
• /
• pp.85-99
• /
• 2022

Dryers becoming commercially available for experimental and industrial use are classified to general drying oven, hot-air dryer, vacuum dryer, freezing dryer, etc. and kinds of them are various from the function, size and volume, etc. But the moisture measurement is not applied although it is important factor for the quality control and the performance improvement of products, and then now is very passive because the weight is weighed arbitrarily after dry-end. Generally the method for measuring moisture is divided by a direct measurement method and a indirect measurement method, and the former such as the change of weight or volume on the front and rear of separation of moisture, etc. is mainly used. Relatively a indirect measurement is very limited to apply due to utilize measurement apparatuses using temperature conductivity and micro-wave etc. In this research, we easily designed the moisture measurement system using the open-source based Arduino, and monitored moisture fluctuations and weight profiles in the real-time without the effect of external environment. Concretely the temperature-humidity and load cell sensors were packaged into a drying oven and the various change values were measured, and their sensors capable to operate 60℃ and 80℃ were selected to suitable for the moisture sensitive materials and the food dry. And also the performance safety using the organic samples of banana, pear, sawdust could be secured because the changes of evaporation rate as the dry time and temperature, and the measurement values of load cell appeared stable response characteristics through repeated experiments. Hereafter we judge that the reliability can be improved increasingly through the expansion of temperature-humidity range and the comparative analysis with CFD(Computational Fluid Dynamics) program.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.115-115
• /
• 2017

2013년 국내 시설(비닐, 유리 온실)에서 재배되는 토마토, 풋고추, 파프리카의 생산량은 총 632,315 톤으로 잎, 줄기 등 발생되는 부산물은 수확량의 약 30%에 해당되는 189,695 톤으로 추정되며 대부분 노지에 방치 유실되거나, 소각 처리된다. 본 연구에서는 이처럼 단순 폐기되는 농업폐기물을 재활용한 고형연료 제조에 필요한 건조장치를 개발하고 실험을 통해 그 성능을 확인하고자 하였다. 연구를 위해 건조용량 100 kg/hr인 실험실용 건조기를 제작하였다. 경상남도 진주시 농업기술원 온실에서 재배되는 파프리카, 토마토, 딸기, 가지, 고추 등의 부산물을 실험원료로 사용하였다. 원료성상, 원료이송방식, 송풍량, 건조온도, 건조시간에 따른 부산물 건조특성을 파악하였다. 원료를 비교적 짧게 절단하고 열풍이 배출되는 다공판위를 견인형 컨베어로 이송시키는 형태의 경우 건조실험 결과 세절된 원료에서 추출된 내부 수분이 외부로 유출되어 원료들 사이의 공극을 채워 건조공기가 원료층을 통과하지 못하게 하고, 특히 $100^{\circ}C$ 이상 고온에 노출되는 경우 원료표면에 잔류하는 유출 수분이 건조되면서 막을 형성하여 내부 원료들은 전혀 건조가 되지 못하는 현상이 관측되었다. 이러한 원료내부의 공극형성 불량으로 국부적으로 공기가 통과되는 부분만 집중적으로 급격한 건조가 진행되고 공급된 건조공기 대부분이 이 부분으로 유출되어 효과적인 건조가 전혀 진행되지 못하였다. 피건조물 사이의 공극형성을 위해 원료를 절단하지 않고 수행한 건조실험 결과 건조 풍량 및 온도에 따라 건조속도 및 처리용량이 다르게 나타나는 것을 알 수 있다. 특히 송풍량과 압력을 증가 시킨 건조 결과로 건조 상하층 간 불균일 건조 해소 및 건조속도, 건조능력에서 연구목표 치를 상회하는 결과를 보여준다. 특히 건조공기온도 $150^{\circ}C$ 이하에서 풍량을 증가시켜서 원하는 건조작업 수행이 가능함을 확인할 수 있었다.