• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.294-295
• /
• 2010

수목영역에서 획득된 라이다데이터는 수목의 높이 및 수목생체량과 같은 수목관련 정보추출에 이용될 수 있다. 본 연구에서는 다양한 지형지물을 포함하고 있는 라이다데이터로부터 수목영역을 분류하는 방법을 제시한다. 이를 위해 수목에서 나타나는 라이다데이터의 다반사 특성, 높이 편차 및 방향성을 인지적 단서로 이용하였다 각 단서들은 먼저 후보영역을 분류하는데 이용되었으며, 수목이 밀집한 최종 수목영역 분류를 위하여 후보영역에 대한 이진영상을 생성한 후 영상처리를 수행하였다. 기준데이터를 이용하여 실험 결과에 대한 검증을 수행하였으며 세 가지 인지적 단서에 의한 방법 모두 높은 분류 성공률을 보였다.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.267-272
• /
• 2005

최근 항공레이저스캐닝(ALS)은 높은 정확도와 경제성을 이유로 지형정보를 획득하는 탁월한 수단으로 주목받고 있다. ALS에 의해 수집되는 고도자료는 DSM, DEM 제작에 유용하게 이용된다. ALS는 고도자료 이외에 지표면의 물질적 특성을 나타내는 반사강도를 획득한다. 그러나 반사강도는 노이즈로 인해 널리 이용되지 못하고 있으며, 노이즈의 주원인은 반사각으로 알려져 있다. 따라서 본 연구는 센서 위치정보와 ALS 고도자료를 이용하여 반사각을 이용하여 반사강도를 보정하는 방법을 제안하였다 여기에는 ${\theta}$의 각도로 입사한 레이저의 강도는 수직으로 입사한 레이저의 강도보다 $sin{\theta}$만큼 감소한다는 물리학적 원리가 이용되었다 반사각은 지표면과 레이저가 이루는 각으로, 센서와 측정점 사이의 각과 지표면의 경사각의 두 단계로 나누었다. 방법의 적합 여부를 확인하기 위해 적외선 영역에서 분리도가 잘 이루어지는 아스팔트, 휴경지(토양), 콘크리트, 수목의 네 가지 검증영역을 선정하여 보정된 반사강도와 보정 전의 반사강도를 비교하였다. 모든 영역에서 반사강도가 증가하였으며 특히 콘크리트와 수목에서의 증가가 두드러졌다. 보정을 통해 네 영역에서 반사강도의 분리도가 향상됨을 물론 그 크기가 '아스팔트<토양<콘크리트<수목'으로 나타나는 이론적인 경향과 유사함을 확인할 수 있다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.11-20
• /
• 2010

In situation that carbon dioxide emissions are being increased as urbanization, urban green space is being promoted as an alternative to find solution for these problems. In urban areas, trees have the ability to reduce carbon dioxide as well as to be aesthetic effect. In this study, we proposed the methodology which uses only LIDAR data in order to extract these trees information effectively. To improve the operational efficiency according to the extraction of trees, the proposed methodology was carried out using multiple data processing such as point, polygon and raster. Because the existing NDSM(Normalized Digital Surface Model) contains both the building and tree information, it has the problems of high complexity of data processing for extracting trees. Therefore, in order to improve these problems, this study used modified NDSM which was removed estimate regions of building. To evaluate the performance of the proposed methodology, three different zones which coexist buildings and trees within urban areas were selected and the accuracy of extracted trees was compared with the image taken by digital camera.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.39-44
• /
• 2013

Trees are important ground objects that cause oxygen and reduce carbon dioxide in urban areas. For management of the trees, many studies using LIDAR data have been conducted. But, they rely on overseas developed LIDAR data processing software applications because there is a lack of domestically developed software applications. Therefore, this work was intended to propose an automation process that helps to extract trees automatically from LIDAR data. The proposed process has the function to classify LIDAR data and to extract building regions and trees automatically. It was applied to a study place in Yongin to conduct a test. As a result, about 88% of trees were extracted from the automation process.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.27-34
• /
• 2013

Due to the increased interest in global warming, interest in forest resources aimed towards reducing greenhouse gases have subsequently increased. Thus far, data related to forest resources have been obtained, through the employment of aerial photographs or satellite images, by means of plotting. However, the use of imaging data is disadvantageous; merely, due to the fact that recorded measurements such as the height of trees, in dense forest areas, lack accuracy. Within such context, the authors of this study have presented a method of data processing in which an individual tree is isolated within forested areas through the use of LIDAR data and ortho-images. Such isolation resulted in the provision of more efficient and accurate data in regards to the height of trees. As for the data processing of LIDAR, the authors have generated a normalized digital surface model to extract tree points via local maxima filtering, and have additionally, with motives to extract forest areas, applied object oriented image classifications to the processing of data using ortho-images. The final tree point was then given a figure derived from the combination of LIDAR and ortho-images results. Based from an experiment conducted in the Yongin area, the authors have analyzed the merits and demerits of methods that either employ LIDAR data or ortho-images and have thereby obtained information of individual trees within forested areas by combining the two data; thus verifying the efficiency of the above presented method.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.2
• /
• pp.55-61
• /
• 2012

The primary factors of the LOS(Line-of-Sight) analysis process are terrain height, camera capacity, and canopy cover. The canopy cover rate differs depending on the changing season, and its value is influenced by the tree density, tree height, and etc. This study generated the canopy cover value based on relationship between NDVI(Normalized Difference Vegetation Index) and DMT(Density Measure % of Tree/Canopy Cover), which is a digital map attribute, and then performed the LOS analysis on six station of test sites. As results, It was found that NDVI and DMT are correlated with each other through the experiments. Based on this finding, new DMT map can be generated using NDVI. Also, There is a difference between the result of visibility analysis using the present DMT and one using a new DMT. Especially, the spatial distributions of the detected visible areas are significantly different between the two visibility analysis results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2B
• /
• pp.165-173
• /
• 2011

In this study, FESWMS FST2DH model was used to analyze the change of flow characteristics after making the riparian forest. The additional flow resistance is calculated based on the drag-force concept acting on each tree and the lateral momentum transfer between planted and non-planted zone could be satisfactorily reproduced by parabolic turbulence model in this depth-averaged 2-D numerical model. For model validation, the simulated velocities were compared with the measured data, showing good agreement in both tree density cases of experiments. The previous method using a proper Manning's n coefficient gives reasonable solutions only to evaluate the conveyance, but the calculated approach velocity at each tree was different from realistic value. The proposed procedure could be widely used to evaluate hydraulic effects of riparian trees in practical engineering.

• The Korean Journal of Mycology
• /
• v.47 no.3
• /
• pp.241-247
• /
• 2019

In 2017, we collected a wood-decay fungus growing on a dead and decaying herbaceous plant (Reynoutria sachalinensis (F. Schmidt) Nakai) in Dokdo, the far-eastern island of South Korea. Morphologically, this species is characterized by resupinate, coriaceous to corky basidiocarps, poroid hymenophores, pseudodimitic hyphal system, and ellipsoid basidiospores. Based on morphological observation and internal transcribed spacer of ribosomal DNA, the fungus was identified as Xylodon flaviporus (Berk. & M.A. Curtis ex Cooke) Riebesehl & Langer. It is only the second macrofungal species reported from Dokdo, and R. sachalinensis is the first herbaceous plant to be identified as a host for X. flaviporus.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_3
• /
• pp.851-861
• /
• 2022

In this study, we analyzed the effects of trees planted in urban areas on PM_2.5 reduction using a computational fluid dynamics (CFD) model. For realistic numerical simulations, the meteorological components(e.g., wind velocity components and air temperatures) predicted by the local data assimilation and prediction system (LDAPS), an operational model of the Korea Meteorological Administration, were used as the initial and boundary conditions of the CFD model. The CFD model was validated against, the PM_2.5 concentrations measured by the sensor networks. To investigate the effects of trees on the PM_2.5 reduction, we conducted the numerical simulations for three configurations of the buildings and trees: i) no tree (NT), ii) trees with only drag effect (TD), and iii) trees with the drag and dry-deposition effects (DD). The results showed that the trees in the target area significantly reduced the PM_2.5 concentrations via the dry-deposition process. The PM_2.5 concentration averaged over the domain in DD was reduced by 5.7 ㎍ m^-3 compared to that in TD.

• Spatial Information Research
• /
• v.20 no.3
• /
• pp.27-38
• /
• 2012

As the necessity of forest conservation and management has been increased, various forest studies using LIDAR data have been actively performed. These studies often utilize the tree height as an important parameter to measure the forest quantitatively. This study thus attempt to apply two representative methods to estimate tree height from airborne LIDAR data and compare the results. The first method based on the detection of the individual trees using a local maximum filter estimates the number of trees, the position and heights of the individual trees, and the mean tree height. The other method estimates the maximum and mean tree height, and the crown mean height for each grid cell or the entire area from the canopy height model (CHM) and height histogram. In comparison with the field measurements, 76.6% of the individual trees are detected correctly; and the estimated heights of all trees and only conifer trees show the RMSE of 1.91m and 0.75m, respectively. The tree mean heights estimated from CHM retain about 1~2m RMSE, and the histogram method underestimates the tree mean height with about 0.6m. For more accurate derivation of diverse forest information, we should select and integrate the complimentary methods appropriate to the tree types and estimation parameters.