• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1399-1400
• /
• 2007

고전압회전기 고정자권선의 절연은 열적, 전기적, 기계적, 환경적 스트레스에 복합적으로 노출되어 열화 된다. 이런 열화의 진전특성을 분석하기 위한 고정자권선 절연상태 진단은 안정한 운전을 보장하고 발전기의 잔여수명을 연장하는데 매우 중요한 방법이다. 이 논문에서는 절연상태를 진단할 수 있는 시험방법 중 부분방전시험을 이용하여 고정자권선에서 발생할 수 있는 모의결함을 인가하고 결함별로 나타나는 위상기준 부분방전 분포특성을 분석하여 결함별 특성을 식별하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.12 no.1
• /
• pp.11-17
• /
• 1999

Aging characteristics of the crosslinked polyethylene have been measured after applying electrical, thermal and combined stresses. ICP and FT-IR measurements confirmed diffusion of low molecular weight components such as antioxidant and presence of carbonyl group. Carbonyl group of aged crosslinked polyethylene under combined stress was detected by FT-IR. As deterioration of the crosslinked polyethylene progresses, crystallinity degree and density decrease. Also, dielectric properties have been measured by tan $\delta$ and $\varepsilon$$_{r}$ measurements. The three-parameter Weibull distribution was found to be the best suited among other probabilistic distribution representing the dielectric breakdown strength of aged crosslinked polyethylene. The scale parameter and location parameter decreases as the applied stress increases. The shape parameter increases as the stress increases.s.

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.127-132
• /
• 2006

Pneumatic cylinders that are usually applied in the factory automation line have complicated failure cause because they are composed of various elements. In this study, we performed life test and performance test of double acting pneumatic cylinders according to the international standards and then analyzed the life and the main failure mode of the cylinders in the same load condition. On the basis of these processes, we can estimate shape parameter for the reliability estimation of pneumatic cylinders and their data analysis of life distribution.

• Journal of Korean Society for Quality Management
• /
• v.24 no.2
• /
• pp.25-43
• /
• 1996

This paper presents the optimal and practical constant-stress accelerated life test plans for the lognormal lifetime distribution tinder assumptions of intermittent inspection and Type-I censoring. In an optimal plan, the low stress level and the proportions of test units allocated at each stress are determined under given inspection scheme and number of inspections such that the asymptotic variance of the maximum likelihood estimator of a certain quantile at use condition is minimized. Although the practical plan adopts the same design criterion, it involves three rather than two overstress levels in order to compromise the practical deficiencies of the optimal plan. Computational experiments are conducted to choose an allocation plan and a inspection scheme of the practical plan and to compare with test plans over a range of parameter values.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.231-233
• /
• 2015

무선 센서 네트워크는 다수의 센서 노드와 하나의 싱크노드로 구성된다. 센서 네트워크상에 분포된 센서 노드들은 데이터 전송 중에 배터리 재충전이나 변경이 곤란하다. 센서들의 제한적 특성을 때문에 일반 유선 네트워크와 달리 에너지 효율적인 네트워크 설계를 요구한다. 이러한 문제를 해결하기 위해 계층적 클러스터 라우팅 프로토콜로서 LEACH 프로토콜을 분석하고, 센서들의 에너지 소모를 줄이고, 네트워크 수명을 연장하는 개선된 LEACH 라우팅 프로토콜을 제안한다. 최적 클러스터를 결정하는 기법을 이용하여 클러스터 수를 고려한 클러스터를 형성하고, 성능 분석은 MATALAB을 이용하여 시뮬레이션 하였으며, 본 개선된 프로토콜이 LEACH 프로토콜과 비교하여 우수함을 보였다.

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.49-53
• /
• 2019

The temperature distribution and lifetime of molds were predicted by computer simulation analysis with various spraying and blowing process of high pressure die casting. After varying the spraying angle and time, the mold temperature, heat exchange and mold life were predicted. As the spraying angle increases, the maximum temperature of the mold decreases, which is because the spraying area increases and the heat exchange with the mold increases. Heat exchange occurs more actively in the blowing process than in the spraying process. This is because the cooling is not performed due to the steam generation. When the spraying angle is 50 degree, the minimum life of the mold is analyzed 200 times. After adjusting the blowing time from 5s to 3s, the minimum lifetime of the mold has been increased almost twice.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.128-133
• /
• 1997

Due to their high strength and good wear resistance, nitro-carburizing materials have been used for many machine components. However, the nitro-carburizing materials are found to have one disadvantage ; that is, their strength and fatigue life show larger scatter than those of non-heated metals. In this paper, therfore, the statistical chracteristics of non-heated and nitro-carburized specimens for SCM415 are investi- gated under two different of stress levels 1.15 .sigma. /sub .omega. / .leq. / .sigma. / sub .alpha. / .leq. / 1.25 .sigma. /sub .omega. /. Seven specimens at each stress level are tested by using rotating bending fatigue tester. The relation between a crack length and fatigue cycles can be arranged for Weibull distribution, and S-N curve using 95% reliability function is obtalined for nitro-carburized specimen.

• Food Science of Animal Resources
• /
• v.23 no.4
• /
• pp.327-332
• /
• 2003

This study was conducted to investigate the characteristics of strains which were isolated from market milk treated with ESL(extended shelf life) and conventional system, and to compare the microbiological quality of ESL milk with conventional milk. In order to characterize the isolated strains, purification, Gram staining, spore staining, catalase, oxidase, motility test, and identification by means of automatic identificator were performed. The results obtained are as follows: total 364 selected strains were analyzed in this study. Depending upon the isolated source, the number of strains from conventional milk was found to be Higher than ESL-milk. By means of grouping of total strains, Bacillus ssp. and Staphylococcus ssp. showed to be predominant. But most of strains were distributed with various groups except Lactobacillus ssp. When the isolates were compared with milk process methods, Enterococcus ssp. was detected much on market milk treated with LTLT pasteurization. Also, Pseudomonas ssp. was detected much on conventional milk treated with UHT pasteurization. By comparison with genus groups depending upon storage temperature of market milk, the higher milk storage temperature increased, the most frequency detected Bacillus ssp. increased. Also, Pseudomonas ssp. was detected most frequently at 10$^{\circ}C$ storage condition. Generally this genus derived from post-contamination during milk processing and related to the quality of market milk during chilled system. In conclusion, it was shown that ESL system reduced post-contamination during milk process, following the improvement of product quality and life cycle during the distribution of market milk.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4398-4404
• /
• 2015

Stainless steel sheets are widely used as the structural material for dynamic machine structures, These kinds structures used stainless steel sheets are commonly fabricated by using the gas welding, For fatigue design of gas welded joints such as various type joint. It is necessary to obtain design information on stress distribution at the weldment as well as fatigue strength of gas welded joints. Thus in this paper, ${\Delta}P-N_f$ curves were obtained by fatigue tests. and, ${\Delta}P-N_f$ curves were rearranged in the ${\Delta}{\sigma}-N_f$ relation with the hot spot stresses at the gas welded joints. Using these results, the accelerated life test(ALT) is conducted. From the experiment results, an life prediction model is derived and factors are estimated. So it is intended to obtain the useful information for the fatigue lifetime of welded joints and data analysis by statistic reliability method, to save time and cost, and to develop optimum accelerated life prediction plans.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.6
• /
• pp.67-72
• /
• 2020

Life tests are essential in reducing the catastrophic damage caused by the accidents of large machinery such as aircraft and ships. However, life tests are challenging to implement due to the high costs and time required to test the life of large machinery parts. Therefore, it is advantageous and convenient to apply accelerated life test techniques for key components to reduce costs and time. In fact, extensive research has already been conducted on these techniques. However, recently, there have been cases in which an experimental value was applied to the shape parameter of the Weibull distribution used in the reliability test, but the test time was not significantly reduced. Therefore, in this paper, the shape parameters are estimated from the probability density function of the Weibull distribution for the analysis of an accelerated life test for bladder accumulators, which are core components of military helicopters. The test time was derived based on the number of samples and confidence level by substituting it into the test time equation. Next, the accelerated life test time was calculated using the steady-state test time with an acceleration factor obtained from the Arrhenius model. The steady-state life test required approximately 15,000 H, whereas the accelerated life test time for one sample at 100 ℃ was 34% shorter than that of the steady-state life test.