• Korean Journal of Remote Sensing
• /
• v.16 no.3
• /
• pp.221-233
• /
• 2000

An intertidal topography is continuously changed due to morphodynamics processes. Detection and measurement of topographic change for a tidal flat is important to make an integrated coastal area management plan as well as to carry out sedimentologic study. The objective of this study is to generate intertidal DEM using leveling data and waterlines extracted from optical and microwave remotely sensed data in a relatively short period. Waterline is defined as the border line between exposed tidal flat and water body. The contour of the terrain height in tidal flat is equivalent to the waterline. One can utilize satellite images to generate intertidal DEM over large areas. Extraction of the waterline in a SAR image is a difficult task to perform partly because of the presence of speckle and partly because of similarity between the signal returned from the sea surface and that from the exposed tidal flat surface or land. Waterlines in SAR intensity and coherence map can effectively be extracted with MSP-RoA edge detector. From multiple images obtained over a range of tide elevation, it is possible to build up a set of heighted waterline within intertidal zone, and then a gridded DEM can be interpolated. We have tested the proposed method over the Gomso Bay, and succeeded in generating intertidal DEM with relatively high accuracy.

• Journal of Wetlands Research
• /
• v.8 no.3
• /
• pp.29-38
• /
• 2006

Digital Elevation Model (DEM) of intertidal flat can be widely used not only for scientific fields, coastal management, fisheries, ocean safety, military, but also for understanding natural and artificial topographic changes of the tidal flat. In this study, we generated DEM of the Ganghwado southern intertidal flat, the largest tidal flat in the west coast of the Korean Peninsula, using waterline method and interferometric synthetic aperture radar (InSAR). Constructed DEM which applied waterline method to the Landsat-5 TM and Landsat-7 ETM+ images closely expresses overall topographic relief of tidal flat. We found that the accuracy was determined by the number of waterlines which reflect various tidal conditions. The application of InSAR to the ERS-1/2 and ENVISAT images showed that only ERS-1/2 tandem pairs successfully generated DEM in the part of northern Yeongjongdo, but construction of DEM in the other areas was difficult due to the low coherence caused by a lot of surface remnant waters. In the near future, Kompsat-2 will provide satellite images having multi-spectral and high spatial resolution within a relatively short period at different sea levels. Application of waterline method to these images will help us construct a high precision tidal flat DEM. Also, we should develop DEM generation method using single-pass microwave satellite images.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.4
• /
• pp.85-99
• /
• 2013

The objective of this paper is to analyze the spatial distribution of errors in the DEM generated using waterlines from multi-temporal remote sensing data and to assess flood vulnerability. Unlike conventional research in which only global statistics of errors have been generated, this paper tries to quantitatively analyze the spatial distribution of errors from a probabilistic viewpoint using geostatistical simulation. The initial DEM in Baramarae tidal flats was generated by corrected tidal level values and waterlines extracted from multi-temporal Landsat data in 2010s. When compared with the ground measurement height data, overall the waterline-based DEM underestimated the actual heights and local variations of the errors were observed. By applying sequential Gaussian simulation based on spatial autocorrelation of DEM errors, multiple alternative error distributions were generated. After correcting errors in the initial DEM with simulated error distributions, probabilities for flood vulnerability were estimated under the sea level rise scenarios of IPCC SERS. The error analysis methodology based on geostatistical simulation could model both uncertainties of the error assessment and error propagation problems in a probabilistic framework. Therefore, it is expected that the error analysis methodology applied in this paper will be effectively used for the probabilistic assessment of errors included in various thematic maps as well as the error assessment of waterline-based DEMs in tidal flats.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.1
• /
• pp.63-68
• /
• 2006

Time series of waterline changes during a flood/ebb cycle can be utilized for supplementary data for measuring bottom topography. The waterlines extracted from consecutive images are substituted for depth contours using water level data. The distances between contours are quantified through a rectification image process. This technique is applied to the Keunpoolan beach in the Daeijak Island near Incheon. A camera monitoring technique supported by natural water level changes produces bottom topography with high precision. It is also less time consuming and more economical. The technique also can be utilized effectively to the physical modeling f3r measuring bottom changes in the three dimensional basin.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.337-349
• /
• 2020

In this study, Helikite, Low Altitude Remote Sensing (LARS) platform, was used to acquire coastal images. In the obtained image, the land and water masses were divided using four types of region clustering algorithms, and then waterline was extracted using edge detection. Quantitative comparisons were not possible due to the lack of in-situ waterline data. But, based on the image of the infrared band where water masses and land are relatively clear, the waterlines extracted by each algorithm were compared. As a result, it was found that each algorithm differed significantly in the part where the distinction between water masses and land was ambiguous. This is considered to be a difference in the process of selecting the threshold value of the digital number that each algorithm uses to distinguish the regions. The extraction of waterlines through various algorithms is expected to be used in conjunction with a Low Altitude Remote Sensing system that can be continuously monitored in the future to explain the rapid changes in coastal shape through several years of long-term data from fixed areas.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.6
• /
• pp.453-461
• /
• 2009

Camera monitoring of topographical changes of intertidal flat was performed at Daehang-ri mud flat outside Semangeum sea dike No. 1, where creation of mud flat was reported after sea dike construction. Ground survey on the mud flat is often limited only to points or few line surveys because of difficulty of walking and limitation of working hours by flood/ebb. This study uses natures of tide that the water lines moving on the intertidal flat during a flood indicate depth contours between low and high tide. Ground coordinates for the water lines extracted from the consecutive images of intertidal flat are calculated and information of topography is acquired by integrating all the water line data. Analysis of 6 camera monitoring data between September 2005 and September 2009 shows 0.127 m deposition per year on the average and variation of deposition/erosion in space and time.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.11 no.4
• /
• pp.145-151
• /
• 2006

The water line moving on the intertidal flat during a flood indicates depth contours between low and high water lines. The water lines extracted from the consecutive images are rectified to get the ground coordinates of each depth contour and integrated to provide three dimensional information of Intertidal flat topography. The tidal flat outside Saemankeum-1 sea dike shows the most obvious changes of tidal flat topography after the construction of sea dikes. This tidal flat topography was observed using digital camera images, and the calculated depths were very similar to in-situ measurement data. Topography changes obtained from two different period data were also examined.

• Journal of Wetlands Research
• /
• v.13 no.1
• /
• pp.45-52
• /
• 2011

Seawater circulations between a bay and the open sea play an important role to make the ecosystem healthy, providing nutrient and oxygen to the benthic environments and cleaning up pollutions. The health of the benthic environment in a bay is closely related to the flushing characteristics of seawater. In this study, to estimate the seawater distribution and circulation characteristics of benthic environment in the Geunso bay, we calculated the hydraulic turn-over time by a hydro-hypsographic analysis. Digital elevation model (DEM) which was generated using waterline method based upon remotely sensed data and water depth of the subtidal zone estimated by echo-sounding survey was applied to the hydro-hypsograhic analysis through a geographic information system (GIS) spatial analysis. The results showed that 95% of the total area of the bay was tidal flat and the hydraulic turn-over time was 1.03 tidal cycle, which indicated that the flushing characteristics of the Geunso bay was very good. Geunso bay was revealed to occupy relatively wide area of benthic environment and to have relatively big tidal range over other domestic and foreign coastal environment, therefore it could have a better seawater circulation characteristics. This result can be effectively applied as fundamental information to establish the system for a quantitative estimate of health of coastal environment in the west coast of Korea and manage the ecosystem in benthic environments.

• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.461-471
• /
• 2015

In this study, we generated orthoimages and Digital Elevation Model (DEM) from Unmanned Aerial Vehicle (UAV) to confirm the accuracy of possibility of geospatial information system generation, then compared the DEM with the topographic height values measured from Real Time Kinematic-GPS (RTK-GPS). The DEMs were generated from aerial triangulation method using fixed-wing UAV and rotary-wing UAV, and DEM based on the waterline method also generated. For the accurate generation of mosaic images and DEM, the distorted images occurred by interior and exterior orientation were corrected using camera calibration. In addition, we set up the 30 Ground Control Points (GPCs) in order to correct of the UAVs position error. Therefore, the mosaic images and DEM were obtained with geometric error less than 30 cm. The height of generated DEMs by UAVs were compared with the levelled elevation by RTK-GPS. The value of R-square is closely 1. From this study, we could confirm that accurate DEM of the tidal flat can be generated using UAVs and these detailed spatial information about tidal flat will be widely used for tidal flat management.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1329-1340
• /
• 2021

The intertidal zone, which is a transitional zone between the ocean and the land, requires continuous monitoring as various changes occur rapidly due to artificial activity and natural disturbance. Monitoring of coastal topography changes using remote sensing method is evaluated to be effective in overcoming the limitations of intertidal zone accessibility and observing long-term topographic changes in intertidal zone. Most of the existing coastal topographic monitoring studies using remote sensing were conducted through high spatial resolution images such as Landsat and Sentinel. This study extracted the waterline using the NDWI from the GOCI-II (Geostationary Ocean Color Satellite-II) data, identified the changes in the intertidal area in Gyeonggi Bay according to various tidal heights, and examined the utility of DEM generation and topography altitude change observation over a short period of time. GOCI-II (249 scenes), Sentinel-2A/B (39 scenes), Landsat 8 OLI (7 scenes) images were obtained around Gyeonggi Bay from October 8, 2020 to August 16, 2021. If generating intertidal area DEM, Sentinel and Landsat images required at least 3 months to 1 year of data collection, but the GOCI-II satellite was able to generate intertidal area DEM in Gyeonggi Bay using only one day of data according to tidal heights, and the topography altitude was also observed through exposure frequency. When observing coastal topography changes using the GOCI-II satellite, it would be a good idea to detect topography changes early through a short cycle and to accurately interpolate and utilize insufficient spatial resolutions using multi-remote sensing data of high resolution. Based on the above results, it is expected that it will be possible to quickly provide information necessary for the latest topographic map and coastal management of the Korean Peninsula by expanding the research area and developing technologies that can be automatically analyzed and detected.