• Journal of the Korean GEO-environmental Society
• /
• v.20 no.4
• /
• pp.31-38
• /
• 2019

Field tests with carbon fiber heating wire (CFHW) embedded inside concrete slab were performed to present the alternative heating material capable of avoid the adverse effects of traditional de-freezing salt on the structures and environment. The CFHW was inserted into the concrete slab in the shape of 'ㄷ' to improve the heat superposition and the temperature on the surface was measured using iButton. The results showed that the temperature where the CFHW's were faced with each other increased to above zero after 12-hour at outdoor air temperature of $-6^{\circ}C$. Comparatively, the temperature slightly increased where the CFHW was embedded on one side because the heat was not superimposed. Hence, it can be said that the CFHW is a suitable heating material to prevent the concrete road from being frozen.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.95-102
• /
• 2011

Anti-icing system can immediately respond when snowing is expected or the snow comes down on the road surface. It has been recognized that the system can reduce traffic accidents and congestion by quickly removing the frozen road surface area. However, it is very difficult to implement this system due to the expensive equipment installation and operation cost, Recently, there was a developed program for predicting the freezing area using three-dimensional model and tracking the sun path. But, there is no objective analysis method and all developed approaches are different so that the general standard of anti-icing system is needed. In this study, we proposed the decision criteria for determining application priorities of the anti-icing system based on weather and road conditions, i.e., geometric and topographic conditions. Regional climate survey, topographical analysis, and dynamic vehicle simulation considered road geometry and skid resistance was conducted to standardize the installation method of anti-icing system.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.93-93
• /
• 2011

연육 연도교에 주로 건설되는 초장대교량은 시설물 특성상 이용객들의 대피공간이 제약받고 태풍, 해일 등 자연재해에 노출이 많기 때문에 다른 공공시설물보다 재난에 취약한 구조물이다. 최근 공공시설물의 건설동향이 구조물의 장대화로 되어감에 따라 재난 발생시 예상 위험이 점점 더 커져가고 있다. 본 연구는 이전 연구를 통해서 구축된 재난관리 시나리오를 토대로 재난관리 알고리즘을 개발하였다. 초장대교량의 재난은 자연재해와 인적재해로 구분할 수 있다. 여러 가지 재해 중 본 연구에서 제시한 재난관리 알고리즘은 자연재해의 경우 안개, 강설, 결빙, 강풍, 지진, 해일 및 풍수해이며 인적재해의 경우 화재, 교통사고, 구조물파괴 및 테러이다. 이 재난관리 알고리즘은 재난관리 전산 프로그램 구축의 기초로 사용될 것이다. 본 연구는 국내외 재난관리 관련 사례조사를 토대로 재난 수준별 평가방법을 수립하였다. 안개, 강설, 결빙, 강풍, 지진, 해일 및 풍수해와 같은 자연재난은 심각한 재난 발생전에 교통통제가 가능한 형태로 분류될 수 있으며 사례조사를 통해 교통통제 관리기준을 설정하였다. 화재, 교통사고, 구조물 파괴 및 테러와 같은 인적재난은 상황 발생시부터 비상대응을 취해야할 재난의 형태로 분류될 수 있으며 사고발생 시나리오를 통해 대응 단계별 평가방법을 설정하였다. 또한 재난 수준별 평가방법을 토대로 재난관리 알고리즘을 개발하였다. 자연재해와 같이 사고 발생 전에 교통통제가 가능한 재해는 교통통제 모듈로 구분하여 재난관리 알고리즘을 설정하였다. 인적재해와 같이 사고 발생 즉시 비상대응을 실시해야할 재해는 비상대응 모듈로 구분하여 재난관리 알고리즘을 설정하였다. 교통통제 모듈과 비상대응 모듈은 원칙적으로 국가재난관리등급에 따라 관심, 주의, 경계, 심각의 4단계로 구분하였다. 교통통제 모듈과 비상대응 모듈은 AAD에 의해 관리자, 외부기관 및 이용자 각각의 세부 행동지침 및 요령을 제시하였다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.2
• /
• pp.121-131
• /
• 2008

Two dimensional road design is connoting danger factor because different point between design standard and driver's reaction. Consequently two dimensional road design is difficult to recognize problem that happen beforehand when before construction. Therefore three dimensional road design that can grasp problem after completion is required. In this study, three dimensional road was designed to evaluate road that is designed. Road designed by Inroad that is road design program. DTM is created using digital map and elevation data. Three dimensional road was designed by integrated DTM of road and topography. Road design evaluation was performed in three dimension. Driving simulation and sight distance assessment were carried out to estimate stability of alignment. Shadow simulation was executed on icy road section for bad section of icy road surface. As a result of evaluation, this study could confirm shape of road after completion. And sight distance could be calculated and visually confirmed. Also, icy road sections were extracted through shadow simulation.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.79-81
• /
• 2020

최근 블랙 아이스에 의한 사고 사례가 많다. 블랙 아이스는 사람의 눈으로 식별하기 힘들고, 보인다 하더라도 도로가 조금 젖은 것으로 판단할 가능성이 높아 차량 사고를 유발할 확률이 높다. 본 논문에서는 블랙 아이스로 인한 사고를 조금이라도 줄이기 위해 센서를 통하여 블랙 아이스를 판별하고 사전 예방할 수 있는 방법과 해결책에 대해 고찰해보고자 한다.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.177-183
• /
• 2011

VES-LMC(very-early strength latex modified concrete) has been widely used as repair material for bridge deck overlay or rehabilitation, because it could be opened to the traffic after 3 hours of curing. However, the bright color of VES-LMC disturb driver's sigh. A black VES-LMC, matching to asphalt concrete, was developed and applied at a filed for driver's comfort and safety. The black VES-LMC included 2% carbon black in cement weight ratio. A series of performance evaluation for black VES-LMC was done in terms of field applicability, pavement color and temperature change. The field applicability test result showed that there were no change of workability, slump and air void, and the compressive strengthen developed more than 20MPa after 4 hours of placement. The thermal stress of black VES-LMC was smaller than that of OPC and asphalt concrete, which means the stability of black VES-LMC. The performance evaluation result showed that the black VES-LMC could prevent road icing at below zero temperatures and promote thawing at melting temperature.

• The Korean Journal of Quaternary Research
• /
• v.3 no.1
• /
• pp.35-45
• /
• 1989

In Korean peninsula as well as in Western European Countries, we can find, reddish bands in sandy deposits of various origin. These bands (called "$B_t$ Band"), composed of fine material, are regularly intervalled and parallel to topography. This study is tring to elucidate their origin and associated milieux, with a group of methods and techniques (field survey, micromorphological analysis, granulometry, X-ray diffractometry of clay minerals...). $B_t$ Bands are not sedimentological origin. They were formed by superposition of two type accumulations in the sandy profile, triggered by different mechanisms: 1) accumulation in banded form, concerning silty heterometric material and micas, oweing to cryophoretic forces operating in course of deep freezing of sandy deposits: 2) illuviation of ferrugineous clays in the precedants bands, migrated in chelate state by soil water. The first processes are associated with very cold and humid climate in which freeze soil more than 3m in depth. The second, cold and humid climate in which podzolizattion is generalized. In case of South Korea and Western Europe, these two types of climates are not present circumstance, but Recent Quaternary (probably since the Wurm).the Wurm).

• International Journal of Highway Engineering
• /
• v.5 no.2 s.16
• /
• pp.1-14
• /
• 2003

This study is a fundamental research for developing self-deicing function of snow-melting asphalt concrete for roadway pavement. The objective of this study is to develop technology of making self-snow-melting asphalt pavement and evaluate properties of the asphalt concrete containing deicers. Asphalt concrete with deicers and CRM was produced by dry process. The $\alpha$-deicer, CRM and F-deicer were used for sand asphalt mixtures of thin-layer pavement on the existing pavement. The $\alpha$-deicer, $\beta$-deicer, CRM A, CRM B and C were used for 13mm dense-graded mixtures on surface course. Penetration grade of 60-80 asphalt was used for asphalt mixtures. Marshall mix-design, indirect tensile strength, freezing and thawing test, analysis of extracted water were carried out to evaluate performance of self deicing function of asphalt mixtures. The study result showed that snow-melting asphalt mixtures had not only good mechanical characteristics and good snow-melting function, but also chemically safe in environmental point of view.

• Journal of the KSME
• /
• v.24 no.4
• /
• pp.275-283
• /
• 1984

유한요소기법은 원만한 온도변화를 갖는 이동경계문제에 대해 적용할 수 있음을 설명하였다. 상변화가 일어나는 요소에서 어느 한 시간 단계에 변화할 수 있는 온도의 범위는 상변화 온도 구간 보다 적어야 원만한 수치해를 얻을 수 있음을 소개하였다. 잠열의 효과를 엔탈피의 온도에 대한 변화율로 처리하여 열용량 행렬을 계산할 수 있음을 설명하였다. 급격한 변화를 갖는 온 도분포를 수치적으로 근사해를 구할 때 나타나는 파동형상은 연속적인 변수를 부분적으로 근사 해를 가정 하는데서 포함되는 오차에 기인한다. 따라서 이러한 급격한 변화의 변수를 취급하는 기법이 요구된다. 상변화를 수반하는 이동경계문제는 물의 결빙금속의 열처리, 용접, 고체연료의 연소 등에서 많이 접하게 되나 전문적인 프로그램이 없으므로(저자가 조사한 바에 의하면) 온 도분포를 요구하는 문제에서는 이의 선결이 요망되고 있다. 특히 구조해석문제에서 시간에 따라 온도조건이 변화는 경우가 많아 온도분포에 대해 따로 계산하고 그 후 구조해석을 하는 방법이 있으나, 이는 상변화와 같은 물성의 큰 변화가 없는 경우에만 가능하다. 따라서 상변화가 있는 문제에서 열탄성(thermo-elasticity)이나 열탄소성(thermoelasto-plasticity)해석을 하기 위해서는 이동경계와 구조해석을 동시에 하여야 한다.

• Journal of Animal Environmental Science
• /
• v.10 no.1
• /
• pp.37-46
• /
• 2004

In order to investigate the effect of floor condition on the fattening performance of cattle, sixteen finishing Hanwoo steers of weighting 570kg were fed for 16 weeks to slaughter on two types of sawdust bedding pen oriented to the south(SP) and the north(NP) then obtained following results. The floor condition of SP roofed by transparent material was dry and flat during overall experimental period, whereas, that of NP roofed by solid slate was muddy and rough even in summer and fall, and then frozen in winter period resulted in interfering with the locomotion and resting behavior of steers. Average daily dry matter intake of steers was not different between tow treatments, however, the average daily gain of steers in NP and SP was 0.64kg and 0.75kg, respectively, meaning that gained 14.3% less for the NP group(p<0.05), accordingly, feed requirement(feed/gain) and TDN/gain increased by 15.9% and 15.5%, respectively. No significant differences were found in slaughter weight, carcass weight, dressing percentage, meat yield index and meat quality traits between two treatments. In conclusion, this study revealed that poor floor condition of feeding pen could decrease weight gain and feed efficiency of cattle by increasing energy consumption for locomotion and conductive energy loss while resting on the floor surface. These results indicates that housing orientation of cattle shed and the selection of roof material are important factors in beef cattle production.