• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.1
• /
• pp.181-190
• /
• 2003

The convergence-confinement method is an attempt to evaluate tunnel stability conditions by means of a mathematical model and a ground response curve. In this study, the convergence-confinement method by numerical model was examined. This method don't need the basic assumptions for a mathematical model. Also This is applicable to general tunnel. According to the results of this study, the change of shotcrete stiffness and the load-distribution ratio used for 2-Dimension numerical analysis are not signficant factors. The ground response curve and the support reaction curve are mutually dependent. Especially the support reaction curve depends upon the ground response curve. The mechanism of tunnel must be analyzed by the interaction between support and ground. Consequently the stability of tunnel must be qualitatively investigated by a ground response curve and quantitatively adjudged by a numerical analysis for the reasonable design of tunnel.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.689-692
• /
• 2011

본 논문에서는 해양작업 상태의 하중조건을 고려한 부유식 원유생산 저장 하역 장치에 설치된 라이져 보강구조의 강도설계에 관련하여 다양한 근사화 기법 기반 설계 최적화 및 그 성능을 비교하고자 한다. 설계 최적화 문제는 하중조건별 구조강도의 제한조건 하에서 중량을 최소화하여 설계변수인 구조 부재치수가 결정되도록 정식화 된다. 비교 연구를 위해 사용된 근사화 기법은 반응표면법 기반 순차적 근사최적화(RBSAO), 크리깅 기반 순차적 근사최적화(KBSAO), 그리고 개선된 이동최소자승법(MLSM) 기반 근사최적화 기법인 CF-MLSM와 Post-MLSM이다. 본 연구에 적용한 MLSM 기반 근사최적화 기법들은 제한조건의 가용성을 보장할 수 있도록 새롭게 개발되었다. 다양한 근사화 모델 기반 설계 최적화 기법에 의한 결과는 설계 해의 개선 및 수렴속도 등의 수치적 성능을 기준으로 실제 비근사 설계최적화 결과와 비교검토 하였다.

• 월간 기계설비
• /
• no.8 s.193
• /
• pp.31-33
• /
• 2006

건설교통부는 지난 7월 24일 일반 · 전문건설업간 겸업제한 제도를 폐지하고, 하수급인과 건설근로자에 대한 보호강화 등 건설산업의 경쟁력 강화와 건전한 발전에 필요한 제도적 기반을 구축하기 위한 건설산업기본법개정안을 입법예고 했다. 개정안의 주요 내용은 △일반 · 전문건설업간 겸업제한 폐지△시공참여자제도 개선△ 건설업체 부도시 하도급 대금을 발주처에서 직접 지급△건설산업 부조리 해소를 위한 규정 보완△ 발주자에게 하도급계획서 제출 등이다. 건교부는 그동안 "기업 · 학계 · 연구원 · 정부"합동으로 포럼을 구성하여 10여 차례 토의하였고, 공청회, 관련업계 간담회 등을 통하여 폭넓은 의견수렴을 거쳤으며, 입법 예고를 통한 추가적인 의견수렴(7.25~8.14)과 규제심사등 정부입법과정을 거쳐 금년 10월중 국회에 제출할 예정이다.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.3 s.36
• /
• pp.473-486
• /
• 1998

A numerically stable technique to remove the limitation in choosing a shift in the subspace iteration method with shift is presented. A major difficulty of the subspace iteration method with shift is that because of singularity problem, a shift close to an eigenvalue can not be used, resulting in slower convergence. This study solves the above singularity problem using side conditions without sacrifice of convergence. The method is always nonsingular even if a shift is an eigenvalue itself. This is one of the significant characteristics of the proposed method. The nonsingularity is proved analytically. The convergence of the proposed method is at least equal to that of the subspace iteration method with shift, and the operation counts of above two methods are almost the same when a large number of eigenpairs are required. To show the effectiveness of the proposed method, two numerical examples are considered.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.363-372
• /
• 1993

An optimization technique with variable orthogonalization and SVD(singular value decomposition) is examined in a double-Gauss type photographic lens design and its convergence and stability are compared with ordinary least squares and DLS(damped least squares) method. It is known that there are close relationship between the stability of optimization and condition number of nomal equation, the ratio between maximum and minimum of eigenvalues. In this study, the stability is greatly improved by limiting the condition number, the SVD, as expeded. The case of DLS with small damping, orthogonalization and SVD shows the most rapid convergence and stability. It means that the unstability of DLS method with small damping is overcome by using the variable orthogonalization and SVD.

• 정보화사회
• /
• s.20
• /
• pp.56-69
• /
• 1989

정보문화의 달이기도 했던 6월은 고도정보화사회를 앞당기는 일련의 획기적인 조치들이 취해져 관련업계의 관심을 크게 집중시키고 있다. 정부는 정보통신회선 사용상의 제한을 대폭 완화하여 민간기업이 실질적으로 VAN사업에 참여할 수 있는 길을 열어놨고 종래 규제일변도였던 전파정책을 권장행정으로 전환하는 전파관리법도 입법예고했다. 정부가 마련한 정보통신회선사용제도 개선조치는 DB, DP만 제공할 수 있도록 되어있는 정보통신역무제공업자의 사업범위를 불특정다수인을 대상으로 한 정보교환 및 타인통신매개행위를 허용했고 지금까지 9600bps급 이하의 저속회선에서만 접속이 허용되어온 다중화장치(MUX)의 사용범위를 대폭확대하여 64kbps급 이상의 고속회선에서도 접속사용할 수 있도록 허용했다. 또한 그룹 VAN의 경우에도 업무상 긴밀한 관계자 등만 이용할 수 있게 한 제한사항도 폐지해 국내 VAN시장에 대한 민간기업의 참여를 전면적으로 허용했다. 이외에도 정보통신역무제공업자가 DP.DB제공을 위해 필요한 경우 컴퓨터 본체에서의 부수적인 정보교환행위를 허용하여 DB내용 갱신(up-data) 등을 위한 중도컴퓨터의 접속도 가능토록 했다. 그런데 그룹 VAN의 경우 이용대상의 제한을 없앴으나 그룹망 중 타인사용특례를 받은 업체 이외의 망에는 이용자가 접속할 수 없도록 되어있기 때문에 각 업체에서는 시스템 통합화를 추진할 확률이 높다. 또한 고속회선에 대한 다중화장치(MUX) 사용을 허용하고 있으나 개방에 대비해 각 업체에서 이미 보유하고 있는 노드 프로세서(Node Processor)를 전용교환기로 간주, 이의 사용을 제한하고 있는 실정이다. 업계에서는 중도컴퓨터의 접속은 허용하고 있으면서 통신과 컴퓨터의 중간자적 기능을 갖고 있는 노드프로세서의 사용을제한한다는 데에 있어서는 의견을 달리하고 있다. 우리 협회에서는 이달 법제위원회를 개최하여 이번 조치에 대한 검토와 함께 전파관리법 입법예고안에 대한 업계의 의견을 수렴, 정부에 건의할 예정이다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.2
• /
• pp.88-94
• /
• 2003

In this paper, we propose a hierarchical triangular mesh generation method based on the motion information and a fast rude convergence method. From the variance of Image difference we decide the region that subdivision is required and perform the adequate triangulation method that is possible to yield a successive hierarchical triangulation. For fast node convergence, in initial search, we use the refinement method that separate the backgroung and object region and maintain the mesh connection by using the bilinear interpolation. The simulation result demonstrate that proposed triangulation method have performance in PSNR than the conventional BMA or order mesh based method and refinement is appropriate for the case of the mesh size is small.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.4
• /
• pp.327-338
• /
• 2004

XRD studies on annealed Na-feldspar (Amelia albite) at $1100^{\circ}C$ showed rapid structural changes due to Si-Al disordering, which resulted in phase transformations from low albite to high albite by 4-days annealing test. TEM SAED analyses on the annealed samples revealed a trend of structural changes, but estimation of the structural state was difficult due to a large deviation of the SAED data. Optimum conditions of CBED analyses on albite was established by employing a cooling specimen holder, 120 kV of acceleration voltage, 37 Jim of condenser aperture size and 25 nm of spot size. A proper orientation showing distinct changes of HOLZ lines corresponding to the structure changes of albite turned out to be close to the [418] direction with $-1.2^{\circ}$ tilting, where the width of two HOLZ lines in low albite was opposite to those in high albite.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.5
• /
• pp.543-551
• /
• 2011

The paper deals with the comparative study of design optimization based on various approximation techniques in strength design of riser support structure installed on floating production storage and offloading unit(FPSO) using offshore operation loading conditions. The design optimization problem is formulated such that structural member sizing variables are determined by minimizing the weight of riser support structure subject to the constraints of structural strength in terms of loading conditions. The approximation techniques used in the comparative study are response surface method based sequential approximate optimization(RBSAO), Kriging based sequential approximate optimization(KBSAO), and the enhanced moving least squares method(MLSM) based approximate optimization such as CF(constraint feasible)-MLSM and Post-MLSM. Commercial process integration and design optimization(PIDO) tools are employed for the applications of RBSAO and KBSAO. The enhanced MLSM based approximate optimization techniques are newly developed to ensure the constraint feasibility. In the context of numerical performances such as design solution and computational cost, the solution results from approximate techniques based design optimization are compared to actual non-approximate design optimization.

• Journal of Korea Multimedia Society
• /
• v.11 no.4
• /
• pp.516-524
• /
• 2008

This paper presents a new modeling technique for the simulation of cloth specific characteristics with a set of hard constraints using an implicit constraint enforcement scheme. A conventional explicit Baumgarte constraint stabilization method has several defects. It requires users to pick problem-dependent coefficients to achieve fast convergence and has inherent stabilization limits. The proposed implicit constraint enforcement method is stable with large time steps, does not require problem dependent feed-back parameters, and guarantees the natural physics-based motion of an object. In addition, its computational complexity is the same as the explicit Baumgarte method. This paper describes a formulation of implicit constraint enforcement and provides a constraint error analysis. The modeling technique for complex components of cloth such as seams, buttons, sharp creases, wrinkles, and prevention of excessive elongation are explained. Combined with an adaptive constraint activation scheme, the results using the proposed method show the substantial enhancement of the realism of cloth simulations with a corresponding savings in computational cost.