• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.6
• /
• pp.1-9
• /
• 2014

In this study the pore water pressures were measured in sea dike constructed with the sand dredged in the sea, and they were analyzed with the hydraulic head loss rate to estimate quantitatively the state of blocking seepage in the sea dike embankment. Blocking state was expressed as the number between 0 and 1. the number of 1 means the state of perfectly blocking seepage and the number of 0 means the state of sea water being passing free. The deeper the installed position was the lower the hydraulic head loss rate was and the longer the seepage path length was the higher the hydraulic head loss rate was. The estimated R-squareds were close to 1, which means that the embankment was steady state without movement of soil particles.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.6
• /
• pp.103-110
• /
• 1997

A performance prediction method is presented for single(double) suction centrifugal pumps with a review of loss correlations given in the previous open literature. Most of the loss analyses mentioned in the present study are one dimensional and this paper investigates several modeling schemes and shows that a fairly good prediction can be achieved by a proper selection of the most important flow parameters resulting from a mean streamline analysis. Predictions of the trends of total head- capacity and pump efficiency-capacity curves agree well with the experimental data in almost the full range of operating conditions. The prediction method developed through this study can serve as a tool to ensure good matching between parts and it can assist the understanding of the operational characteristics of general purpose centrifugal pumps.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.625-629
• /
• 2010

암거 수리설계는 상류부의 수위를 과다하게 상승시키지 않는 상태에서 안전하게 계획홍수량을 하류로 소통시킬 수 있도록 최적의 단면을 결정하는 것이다. 현재 국내 암거 설계는 한국도로공사(1991)에서 발표한 "도로배수계획"을 이용하고 있는데, 이는 주로 미국도로성(FHWA)에서 발표한 설계기법을 따른 것이며, 이 기법은 설계항목과 관련되는 설계유량과 지배단면을 결정하여 시행오차적인 방법으로 계획 상류부 수심을 산정하는 순서로 진행된다. 상류부 수심을 결정하기 위해서 미국도로성의 기법은 계산도표를 이용하여 손실 수두와 한계수심을 산정한다. 그러나 계산도표를 이용하여 설계할 경우 주관적인 오차가 생길 수 있으며 전산해석에 있어서도 큰 장애요인이 될 수 있다. 본 연구에서는 기존 연구에서 기술된 암거 설계법을 전반적으로 재검토하여 일부 수식 전개 과정에서 발생한 오류를 수정하고, 암거의 규격 산정 시 암거의 형상을 미리 결정하여 암거 프로그램 개발 시 효율적일 것으로 판단되는 새로운 방법을 개발하였다.

• Journal of Korea Water Resources Association
• /
• v.50 no.7
• /
• pp.441-453
• /
• 2017

Water distribution networks (WDNs) supply drinking water to end users by maintaining sufficient water pressure for reliable water supply in normal and abnormal conditions. To design and operate WDNs in efficient way, it is required to quantify water supply ability of the network. Various reliability indices have been developed and applied in this field. Most of the reliability indices are calculated based on the energy within a network; that is, the total energy entered the network, the energy dissipated through water supply process, and the energy finally supplied at the nodes, etc. This study explains the energy composition in WDNs and introduces three well-known reliability indices developed based on the energy composition of the network. The three indices were applied to a study network under various demand loading scenarios that could occur in real-life operation practices. This study aimed to investigate the applicability of the reliability indices under abnormal scenarios and proposed to illustrate the spatial distribution of the system reliability in more intuitive way for proper responses to the abnormal situations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.387-387
• /
• 2017

인공함양 시설을 설계 및 운영하는 단계에서 설치 예정부지의 자연적 특성(지형, 지질, 기후 등)과 인공적 특성(주입정과 양수정의 거리, 주입량, 양수량 등)은 중요한 인자라고 볼 수 있다. 인공함양 예정 부지의 개념모델을 설정하고 수리전도도와 이격거리(주입정과 양수정의 직선거리)에 대한 민감도 분석을 수행하였다. 인공함양 예정 부지는 충적대수층이며, 인공함양 주입량과 양수량은 $150m^3/day$로 동일하게 설정하였다. HydroGeoSphere 모델링을 통한 민감도 분석은 수리전도도($10^{-1}cm/sec$, $10^{-2}cm/sec$, $10^{-3}cm/sec$, $10^{-4}cm/sec$)와 이격거리(10 m, 50 m, 100 m) 조건에 대해 총 12회 수행하였다. 수리전도도가 $10^{-1}cm/sec$ 및 $10^{-2}cm/sec$인 경우의 모델링 결과, 이격거리가 100 m 범위 이내에서는 지하수위 변동이 발생하지 않았다. 수리전도도가 $10^{-3}cm/sec$인 경우의 모델링 결과, 이격거리가 10 m일 때 5 m 이내의 수위하강이 발생하고 영향반경은 약 14 m 정도로 나타났고, 이격거리가 50 m일 때 5 m 이내의 수위하강이 발생하고 영향반경은 약 31 m 정도로 나타났고, 이격거리가 100 m일 때 5 m 이내의 수위하강이 발생하고 영향반경은 약 34 m 정도로 나타났다. 수리전도도가 $10^{-4}cm/sec$인 경우의 모델링 결과, 이격거리가 증가할수록 양수에 의한 수위하강과 영향반경이 증가하였으며, 낮은 수리전도도로 인해 양수로 인한 수두손실을 회복할 수 없었기에 양수정 주변에서 반경 수십 m 이상의 수두하강 영역을 형성하고 주입정 근처에서는 주입속도가 대수층의 투수능력에 비해 상당히 높기 때문에 5 m 정도의 수위상승이 나타났다. 모델링 결과를 분석하여, 수리전도도가 $10^{-3}cm/sec$ 이하이고 이격거리가 10 m 범위 이상인 충적대수층에 $150m^3/day$를 주입하면서 동시에 $150m^3/day$를 양수하는 시스템에서는 지하수위변동이 발생하므로 주입량과 양수량의 조절이 필요하다는 것을 확인하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.432-432
• /
• 2021

우리나라는 대부분의 에너지 공급을 해외에 의존하고 있는 실정이다. 산업통상자원부와 에너지경제연구원에서 발간하는 2018년 에너지통계연보(에너지경제연구원과 산업통상자원부, 2018)에 실린 2010년부터 2017년까지의 에너지수급 균형을 보면 원유, 천연가스, 석탄, 우라늄 등 평균 95.4%의 에너지를 수입하고 있는 실정이다. 수력 및 신재생에너지의 경우 기후변화에 대응하는 수단 그리고 정부의 저탄소에너지 전환 정책으로 인정받아 상대적으로 낮은 에너지 경제성에도 불구하고 꾸준히 보급되고 있다. 우리나라뿐만 아니라 독일, 프랑스, 영국, 중국 그리고 인도와 같은 세계 주요 국가들이 친환경 에너지 정책을 주도함에 따라 향후 신재생에너지의 공급 규모는 크게 확대될 것으로 전망된다. 중력 물 보텍스 마이크로 수력 발전 시스템은 시스템의 상하류부의 수두(hydraulic head) 차에 의해 저류조(basin)에서 발생되는 물의 보텍스 즉 소용돌이(whirlpool)를 이용하여 임펠러(impeller)를 회전시켜 전기에너지를 생산하는 친환경적 재생에너지의 일종이다. 또한, 시스템으로 유입되는 물은 전기에너지 생산을 위한 임펠러를 통과한 후 다시 하천으로 방류되므로 하천 수의 손실 그리고 하천의 물길도 거의 교란 시키지 않는다. 4가구 정도의 연간 가정용 전기 요구량인 12와 15kW 사이의 전기에너지를 생산하기 위해서는 발전시스템의 상류와 하류의 수두차가 단지 1.5에서 1.7m 이하이면 충분한 것으로 알려져 있다. 본 연구에서는 중력 물 보텍스 친환경 마이크로 발전 시스템을 구성하는 저류조(basin)에 대해 최대 발전효율을 발생시키기에 최적인 기하학적 형태를 도출하는 것이며, 이를 위해 저류조의 cone angle에 따른 다양한 저류조 직경 및 물 보텍스 생성을 위한 저류조 형태의 변화, 유입수로와 저류조와의 각도인 notch angle의 변화, 유입부 폭과 유출부 직경, 유입수로의 길이 그리고 유입수로에서의 초기수심과 같은 기하학적 매개변수를 변화시켜 모의를 수행하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.355-362
• /
• 2016

The pipe material is selected according to the physical and chemical properties of the fluid flowing within it. Because the fluid used in fire extinguish systems is water, the various foreign substances dissolved in it cause scale to form on the pipe wall and accelerate the corrosion and aging of the pipe itself. This results in an increase in the friction loss and eventually degrades the efficiency of the pump. The use of CPVC (Chlorinated Poly-Vinyl Chloride) pipes was confirmed to reduce the friction loss compared to conventional steel pipes in the design and construction stages. The friction loss was found to be 76.64MPa with a C-value of 120 for the steel pipe and 50.72 MPa with a C-value of 150 for the CPVC pipe in an actual apartment construction environment. It was confirmed that the friction loss was improved by about 34% when using the CPVC pipe. When the steel and CPVC pipes were employed in the construction, the construction costs were 1,585,158 and 931,842 won, respectively. Therefore, it was shown that the construction cost was reduced by about 41%. We investigated the safety of the fire extinguishing system and the improvement in the economic performance due to the reduction in the total installed capacity by studying practical applications in the field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.56-63
• /
• 2018

The management of Combined Sewer Overflows(CSOs) and Separated Sewer Overflows(SSOs) discharge directly to the effluent system in an untreated state, which occurs when the facility capacity is exceeded due to heavy rain, has become an important issue in recent years as the heavy rain becomes a regular phenomenon. Despite the continuous development of filtration technology, targeting densely populated urban areas, CSOs are rarely applied. Therefore, this study was carried out to optimize the process to apply CSOs in a pilot-scale horizontal flow filtration system with a rope-type synthetic fiber. The research was carried out in two steps: a preliminary study using artificial samples and a field study using sewage. In the preliminary study using an artificial sample, head loss of the filter media itself was analyzed to be approximately 1.1cm, and the head loss was increased by approximately 0.1cm as the linear velocity was increased by 10m/hr. In addition, the SS removal efficiency was stable at 81.4%, the filtration duration was maintained for more than 6 hours, and the average recovery rate of 98% was obtained by air backwashing only. In the on-site evaluation using sewage, the filtration duration was approximately 2 hours and the average removal efficiency of 83.9% was obtained when belt screen (over 450 mesh) was applied as a pre-treatment process to prevent the premature clogging of filter media. To apply the filtration process to CSOs and SSOs, it was concluded that the combination with the pre-treatment process was important to reinforce the hydraulic dimension for the stable maintain of operation period, rather than efficiency. Compared to the dry season, the quality of incoming sewage was lower in the rainy season, which was attributed to the characteristics of the drainage area with higher sanitary sewerage. In addition, the difference in removal efficiency according to the influent quality of the wet season and dry season was small.

• Journal of Korea Spatial Information System Society
• /
• v.2 no.2 s.4
• /
• pp.75-84
• /
• 2000

GIS has been building for various application fields with the aids of NGIS project, especially numerous municipal governments are building a UIS in the level of local governments' informatization. Although there are some difference between municipal governments' business, still many things are in common. So far, individual municipal governments have developed a UIS for their own use, which lead to duplicated development of the UIS. The component technology has been introduced to remove such duplicated efforts and it enabled maximizing the reusablilty of the UIS already developed. This paper proposes a component design for network analysis of the drinking water to calculate the amount of flow and the head loss. This component design provides the initial water amount to estimate the amount of the network flow and the head loss, thereby supports the decision making such as installation or extension of the pipe network. The process of the component design accompanies the business reengineering to support the standardized business work flow. Also, the design of the network analysis component uses the algorithms induced with UML specification. Based on the component design, the component development has been progressing and the network analysis system would be followed. In the near future, another component to integrate the network analysis and the business related to the drinking water needs to be developed.

• Journal of Bio-Environment Control
• /
• v.16 no.4
• /
• pp.297-302
• /
• 2007

Discharge variations of perforated hose and drip irrigation systems were examined to evaluate irrigation uniformity at different pressures and length of branch line. Evaluation using statistical uniformity indicated that button drippers performed at excellent level but drip tapes and drip hoses were a little lower level. Nominal discharge of drip irrigation systems showed at the high side within the range of regulating pressure provided by the manufacturer. It is desirable that the length of branch line for drip hose, drip tape, and button dripper should be limited to 50 m, 70 m, and 100 m, respectively. Irrigation uniformity of perforated hoses showed very low level. So it is recommended that the length of branch line for perforated hoses should be limited to $30{\sim}35m$.