• The Journal of the Acoustical Society of Korea
• /
• v.23 no.2
• /
• pp.109-116
• /
• 2004

This paper deals with data association using 3 sets of passive linear array sonars (PUS) geometrically positioned in a Y-shaped configuration, but fixed in an underwater environment. The data association problem is directly transformed into a 3-D assignment problem, which is known to be NP-hard. For generic passive sensors, it can be sotted using conventional algorithms, while it in PLAS becomes a formidable task due to the presence of bearing ambiguity. In particular, we proposed data association method robust to bearing measurements errors by incorporating frequency information and analyze a region of ghost problem by geometrical relation PUS and target. We analyzed the effectiveness of the proposed method by representative simulation in multi-target.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.145-153
• /
• 2019

Adaptive beamforming methods are known to suppress sidelobes and improve detection performance of weak signal by constructing weight vectors depending on the received signal itself. A standard adaptive beamforming like the MVDR (Minimum Variance Distortionless Response) is very sensitive to mismatches between weight vectors and actual signal steering vectors. Also, a large computational complexity for estimating a stable covariance matrix is required when wideband beamforming for a large-scale array is used. In this paper, we exploit the WBRCB (Wideband Robust Capon Beamforming) method for stable and robust wideband adaptive beamforming of a passive large uniform line array sonar. To improve robustness of adaptive beamforming performance in the presence of mismatches, we extract a optimum mismatch parameter. WBRCB with extracted mismatch parameter shows performance improvement in beamforming using synthetic and experimental passive sonar signals.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.177-183
• /
• 2019

In this paper, we proposed an application method of ICA (Independent Component Analysis) to passive line array sonar to separate interferences from target signals in low frequency band and compared performance of three conventional ICA algorithms. Since the low frequency signals are received through larger bearing angles than other frequency bands, neighboring beam signals can be used to perform ICA as measurement signals of the ICA. We use three ICA algorithms such as Fast ICA, NNMF (Non-negative Matrix Factorization) and JADE (Joint Approximation Diagonalization of Eigen-matrices). Through experiments on real data obtained from passive line array sonar, it is verified that the interference can be separable from target signals by the suggested method and the JADE algorithm shows the best separation performance among the three algorithms.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.31-36
• /
• 2001

Passive sonar system forms the various beams in any desired directions to obtain the improvement in Signal-to-Noise (S/N) ratio, bearing detection and localization of targets, and the attenuation of interferences from other directions. The improvement of beamforming is very important to detect modern underwater targets as noise reduction technology leads to considerably low-level acoustic emissions in the long range in complex environmental sea. In this paper, we proposed the spatial cross correlation beamforming (SCCBF) algorithm using cross correlation matrix of individual hydrophone pairs of linear array sensors. By the theoretical analysis and simulation, the proposed SCCBF is demonstrated that its performances compared to conventional beamforming (CBF) output can be obtain above 3dB of array gain and about half of beam width represented the bearing accuracy in target detection. Also, this paper presents sea test result of linear passive sonar system that the proposed algorithm implemented.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.1 s.20
• /
• pp.25-31
• /
• 2005

PLA(Passive Linear Array) system has been primarily utilized to detect and track underwater targets, such as submarines. This system has difficulty in distinguishing between underwater targets and surface ships in a dense target environment. And a single-PLA system does not provide target state observability. At least two PLAs are necessary to observe a track uniquely. To classify and localize the underwater targets effectively, first of all, it is very of importance to discriminate the surface ships in the multi-target environment. These problems can be overcome by the association of distributed PLAs and radars. In this paper, we present an algorithm to solve the track-to-track association of the heterogeneous data from three PLAs and one radar are noncollocated with known sensor positions. Also, this paper shows the simulation results to verify the proposed algorithm.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.2
• /
• pp.115-122
• /
• 2017

We propose a robust adaptive beamforming algorithm for triplet array sonar. The proposed beamforming algorithm obtains robustness to mismatches, left/right discrimination, and has two steps. The first is a cardioid beamformer, which supports left/right discrimination of target signals. It applies the conventional delay-and-subtract to each triplet's signal with its rotation angle and obtains multiple cardioid beams. The second is a robust adaptive beamforming to minimize nearby interferences. We regard cardioid beams as input signals of a line array and apply an adaptive beamforming algorithm to the cardioid beams. Simulations results show that the proposed algorithm provides significantly better performance than the conventional algorithms, while supporting left/right discrimination of target signals.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.255-262
• /
• 2020

In modern passive sonar systems, a towed array sensor is used to minimize the effects of own ship noise and to get a higher SNR. The thin and long towed array sensor can be guided in a non-linear form according to the maneuvering of tow-ship. If this change of the array shape is not considered, the performance of beamformer may deteriorate. In order to properly beamform the elements in the array, an accurate estimate of the array shape is required. Various techniques exist for estimating the shape of the linear array. In the case of a method using a heading sensor, the estimation performance may be degraded due to the effect of heading sensor noise. As means of removing this potential error, weighted polynomial fitting technique for estimating array shape is developed here. In order to evaluate the performance of proposed method, we conducted computer simulation. From the experiments, it was confirmed that the proposed method is more robust to noise than the conventional method.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.1
• /
• pp.6-10
• /
• 1986

The feasibility of passive detection of fishes which had been caught in the fishing grounds near the Korean peninsula was theoretically investigated. Considering the commercial importance and the acoustical informations readily identified, although many species of fish make noise, Croaker is clarified to be a representative fish for passive fish detection. Assuming a source level of the sound produced by croakers is given as 150-18OdB (re 1l'pa, 500 Hz bandwidth), The range detected by a passive line array sonar is estimated to be about 3-20km. In addition, the tonal noise (700~800Hz) made by croaker that is easily separated from underwater noise is expected to increase the ability to discriminate from the other species of fish.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.10
• /
• pp.788-796
• /
• 2016

Bearing and frequency measurements of TMA (Target Motion Analysis) in passive line array SONAR have lower bearing rate and frequency doppler, and are not detected or tracked continuously because of various ocean environments. This is a main reason to effect the TMA performance and it takes a long time to get TMA solutions. We propose the bearing and frequency TMA(BFTMA) using accumulative batch estimation to solve the TMA problem of line array passive SONAR. The accumulative batch estimation structure is based on MLE (Maximum Likelihood Estimation) but used accumulative measurements. The accumulative batch estimation is applied for the BFTMA with nonlinear Kalman filter to estimate the target range, speed and course. Simulation and sea data analysis were carried out to verify the performance and applicability of the proposed techniques.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.210-213
• /
• 1999

수동소나체계에서 음원의 위치와 관련된 매개변수를 산출하기 위해 정합장처리(Matched Field Processing)가 이용된다 본 연구에서는 수직선배열센서를 이용한 정합장처리에서 음원 위치추정에 영향을 미치는 다양한 요인 중, 수직음속분포 오정합(mismatch)에 의한 영향을 MV 프로세서 (Minimum Variance Processor)를 이용하여 모의실험함으로써 그 결과를 분석하였다. 천해 모의환경에서 동일한 기울기로 증감하는 수직음속분포 오정합은 음원 위치추정에서 거리성분의 오차를 가지며, 상이한 기울기를 갖는 수직음속분포 오정합은 거리와 수심 성분의 오차가 유발됨을 확인할 수 있었다. 심해 모의 환경에서 수직음속분포 오정합은 거리와 수심 성분의 오차가 유발되고, 거리추정의 전반적인 경향은 천해의 동일한 기울기를 가지는 경우와 유사함을 확인할 수 있었다.