• Journal of agriculture & life science
• /
• v.45 no.5
• /
• pp.49-56
• /
• 2011

This study was conducted to provide data for the maintenance of the Corylopsis coreana community within the Hallyeohaesang National Park. Survey site of Corylopsis coreana community was located at a valley, which composed of over 60% exposed rock. As this result, much of the species was damaged or washed away due to the water flow from rainfall. The tree layers dominant species were Quercus serrata and Pinus densiflora. while the subtree layers dominant species were Corylopsis coreana, Acer pseudosieboldianum, Sapium japonicum, Chamaecyparis obtusa and Cornus kousa etc. The shrub layers dominant species were Callicarpa japonica and Smilax china etc., and herbaceous layers dominant species were Disporum smilacinum etc. Increased precipitation and rainfall days were observed from May to September in this valley during 2008~2010, which likely increased soil erosion and damage. Because water flow pattern was dispersed the Corylopsis coreana seed and the soil floor was shallow, and population of Corylopsis coreana seedlings were diminished.

• Korean Journal of Plant Resources
• /
• v.32 no.1
• /
• pp.72-85
• /
• 2019

This study was conducted to investigate the vascular flora distributed in the Gatbawi District of Palgongsan Natural Park and to provide basic data for the conservation and management of the natural resources. The results of the investigation of the flora with the Gatbawi District from April 2015 through October 2017 are as follows. As a result of drawing up a list of flora based on the specimens of evidence, as for the entire flora, 238 taxa were identified in total: 75 families, 167 genera, 214 species, 3 subspecies, 18 variants and 3 varieties. Also, one species of rare plant, 20 particular floristic species and a total of 18 species of naturalized plant were found.

• Journal of Bio-Environment Control
• /
• v.32 no.1
• /
• pp.1-7
• /
• 2023

Understanding the light environment in greenhouse cultivation and the light utilization characteristics of crops is important in the study of photosynthesis and transpiration. Also, as the plant grows, the form of light utilization changes. Therefore, this study aims to develop a light extinction coefficient model reflecting the plant growth. To measure the extinction coefficient, five pyranometers were installed vertically according to the height of the plant, and the light intensity by height was collected every second during the entire growing season. According to each growth stage in the early, middle, and late stages, the difference between the top and bottom light intensity tended to increase to 69%, 72%, and 81%. When leaf area index and plant height increased, the extinction coefficient decreased, and it showed an exponential decay relationship. Three-dimensional model reflecting the two growth indexes, the paraboloid had the lowest RMSE of 1.340 and the highest regression constant of 0.968. Through this study, it was possible to predict the more precise light extinction coefficient during the growing period of plants. Furthermore, it is judged that this can be utilized for predicting and analyzing photosynthesis and transpiration according to the plant height.

• Journal of Applied Biological Chemistry
• /
• v.57 no.4
• /
• pp.341-345
• /
• 2014

Fate of fenarimol, chlorothalinol, and ethoprophos sprayed to control disease and pest was studied in a agroforest culture field of Jangsu-gun, Jeollabuk-do, Korea. Concentrations of fenarimol, chlorothalinol, and ethoprophos in runoff water ranged mostly to 0.2 mg/L at the first rainfall-runoff event. And then was rapidly decreased than detection limit at 60 days after the application. The fenarimol and chlorothalonil residue in soil was dissipated to below detection limit at 30 days after the application. But ethoprophos was decreased to below detection limit at 135 days after the application. The concentrations of experimental pesticides were highly detected in agroforest culture field than in open culture field. It is assumed that experimental pesticides were strongly adsorbed by organic matter such as fulvic acid and humic acid.

• Journal of Conservation Science
• /
• v.37 no.2
• /
• pp.90-100
• /
• 2021

Outdoor cultural buildings and their accessories receive different amounts of solar radiation depending on their location's latitude, azimuth, and tilt. Shading is also affected by the surrounding terrain and objects, necessitating individual and quantitative shading analysis. In July 2019, this study conducted a shading analysis on the tops, midpoints, and bottoms of wooden pillars in the azimuth of Cheongpunggak, a traditional building in South Korea's National Research Institute of Cultural Heritage. The shading analysis found that the solar access/shade predicted by the solar trajectory meter was 30 minutes slower than measured in the field. The highest solar access and solar radiation levels came from the south, followed by the west, east, and north. The pillars' bases received the highest solar access and solar radiation, followed by their midpoints and tops. Solar access was high at tilt 90°, but solar radiation was high at tilt 0°, due to the light-collection efficiency and the irradiance. Shading on the pillars' tops was caused by the roof eaves, while shading on the midpoints and bases were affected by the surrounding pillars, topography, and other objects. Simultaneous solar access at the tops, midpoints, and bottoms was possible for 365 days for the northwest, west, and southwest pillars but only from October to March for the south and southeast pillars.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.243-246
• /
• 2012

The study was aimed at the development of the simple linear regression model to estimate the fruit yield of sweet pepper and to support decision-making management for growing sweet pepper crop in Korea. For quantitative analysis of relationship between environmental data and periodical yield of sweet pepper the data obtained from the commercial Venlo-type glasshouse for 2 years. Obtained periodical yield data of five different cultivars and radiation data were accumulated and fitted by linear regression. A significant linear relationship was found between radiation integral and fruit yield, whereas the production per unit of radiation was different between cultivars. The slope of linear regression could indicate as light use efficiency for fruit production ($LUE_F$, $g{\cdot}MJ^{-1}$). $LUE_F$ of 'Ferrari' was $5.85g{\cdot}MJ^{-1}$, 'Fiesta' 5.32 for first year and $4.75g{\cdot}MJ^{-1}$ and for second year, 'President' was $4.66g{\cdot}MJ^{-1}$, 'Cupra' was $3.86g{\cdot}MJ^{-1}$, and 'Boogie' was $6.48g{\cdot}MJ^{-1}$. The amount of light requirement for the unit gram of fruit was between $25.88J{\cdot}g^{-1}$, for 'Cupra' and $15.42J{\cdot}g^{-1}$ for 'Boogie'. Although we found the linear relationship between radiation and fruit yield, $LUE_F$ was varied between cultivars and as well as year. The linear relationship could describe the fruit yield as function of radiation, but it needed more variable to generalization of the production, such as cultivar specifications, temperature, and number of fruits set per plant or unit of ground.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.427-433
• /
• 2014

Trellising is an important cultural practice that affects grape quality and yield. Some grape cultivars require different trellising under different climate and soil conditions. To find suitable trellis conditions for grape cultivar 'Cheongsoo', we measured growth and fruit characteristics with three different trellis systems: curtain, Geneva double curtain (GDC), and modified T. The maximum light exposure of clusters in the curtain, GDC, modified T trellis systems was 670, 1,654, and $1,649{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. However, there was no difference in air temperature among the three trellis systems. Net $CO_2$ assimilation rate at $1,500{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ light intensity was 13.4, 13.7, and $8.7{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ in curtain, GDC, and modified T trellis systems, respectively. Trunk cross section area (TCSA) and bud burst rate were not significantly different among the three systems. Shoot number was 31.3, 47.0, and 37.0 in curtain, GDC, and modified T trellis systems, respectively. The shoot length was higher (243.9 cm) in the modified T trellis system than in the single curtain (171.1 cm) and GDC (151.5 cm) systems. Interior leaf number and leaf layer number were higher in the GDC system, in which there are two primary branches, in comparison to the modified T and curtain systems, which utilize one primary branch. Primary leaf area and lateral leaf area were significantly higher in the modified T trellis system in comparison to the GDC system. Berry weight, length and diameter, and total soluble solids were not significantly different among the three trellis systems. However, cluster weight and cluster number per tree were significantly higher in GDC. Titratable acidity was significantly lower in GDC. Collectively, our data suggest that the GDC trellis system is preferable for grape 'Cheongsoo' to maintain fruit quality and quantity in Korea.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.1
• /
• pp.41-46
• /
• 2011

Reliable information on the surface solar radiation is indispensable for rebuilding food production system in the famine plagued North Korea. However, transfer of the related modeling technology of South Korea is not possible simply because raw data such as solar radiation or sunshine duration are not available. The objective of this study is restoring solar radiation data at 27 synoptic stations in North Korea by using satellite remote sensing data. We derived relationships between MODIS radiation estimates and the observed solar radiation at 18 locations in South Korea. The relationships were used to adjust the MODIS based radiation data and to restore solar radiation data at those pixels corresponding to the 27 North Korean synoptic stations. Inverse distance weighted averaging of the restored solar radiation data resulted in gridded surfaces of monthly solar radiation for 4 decadal periods (1983-1990, 1991-2000 and 2001-2010), respectively. For a direct application of these products, we produced solar irradiance estimates for each sub-grid cell with a 30 m spacing based on a sun-slope geometry. These products are expected to assist planning of the North Korean agriculture and, if combined with the already prepared South Korean data, can be used for climate change impact assessment across the whole Peninsula.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.224-224
• /
• 2003

광통신을 위한 구성 요소는 빛을 발생시키는 발광소자, 빛을 검출하는 수광소자 그리고 광신호를 처리하는 광신호처리 소자로 구성된다. 이때 각 소자간 광전송과 광소자에 의한 광 신호 처리 과정에서 광전송 손실이 심각하게 일어나 광정보를 상실하게 되므로 각 요소별로 광신호 증폭이 반드시 필요하다. 뿐만 아니라 완전 광화에 의한 초고속/대용량 광통신망의 구축에는 저가이며, 광집적화가 가능한 광도파로형 광증폭기가 요구되고 있다. 짧은 거리에 높은 증폭 효율을 얻기 위한 광도파로형 광증폭기를 구현하기 위해서는 광통신 파장대인 1.55$\mu\textrm{m}$ 대역의 증폭이 가능한 Er 이온을 고농도로 도핑 할 필요가 있다. 그러나 Er 이온을 단순히 고농도로 첨가하면 Er-Er 간 뭉침 현상에 의해 더 이상의 증폭이 어렵게 된다. 본 연구에서는 이러한 문제를 해결하면서 스핀 코팅이 가능하여 저가 공정이 가능한 유/무기 졸-겔 재료 내에 Er 이온을 제어된 방법으로 첨가하고 그 결합 환경을 FT-IR 및 $^{17}$ O-NMR로 분석하였다. 유/무기 졸겔 재료 제조를 위하여 먼저 MPTS(MethAcryoxyPropylTrimethoxySilane)를 부분 가수분해한 후 ZrOCl$_2$.8$_2$O (Zirconyl Chloride Octahydrate) 와 ErCl$_3$. 6$H_2O$ (Erbium(III) Chloride Hexahydrate)를 순차적으로 결합시키고, Zr/MPTS 및 Zr/Er의 첨가비에 따른 발광 특성을 PL(photoluminescence) 스팩트럼으로 분석하여 Er 이온의 주위 결합 환경이 PL에 미치는 영향을 조사하였다. 또한 Si 기판에 코팅한 Er이 도핑된 유/무기 하이브리드 졸-겔 코팅막의 굴절율 등 광도파로 재료로서의 특성도 프리즘 커플러 등을 이용하여 조사하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1869-1872
• /
• 2003

As SLA(Sterealithography), SLS(Selective Laser Sintering), LOM(Laminated Object Manufacturing), FDM(Fused Deposition Modeling) etc. The FDM system the heart of a study and is developed by Stratasys co. ltd, in US., is small and cheap R.P. The material filament is heated until the material reaches a near-liquid state, it is pumped through a nozzle and become hand with a shape required, and this nozzle move pumping on the previously deposited material. Such FDM system that choice deposition type with X-Y plouter obtain in the thin continue layer by decreasing amount of extrusion or to central the injection amount when the head slow down at the corner, but in the process that fusion wax or resin become hand, deformation occur and it will affect the shape accuracy and the surface roughness. Such effect will depreciate quality and reliability of the product. Therefore, when the product made in actuality, the fundamental study on the basis geometry(surface, volume, line, angle) must be preceded and it have been research by many Free Form Fabrication. So, this basic object study purpose to obtain the fundamental geometry data and to enhance the surface roughness of the shape. And an operant can use the data for the progress of the surface roughness. This study research the estimation and application of the prototype surface roughness by adjustment the injection amount. And basie of this research, describe the pattern of prototype surface roughness and also used the result to estimate the surface of prototype.