• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.11a
• /
• pp.71-79
• /
• 2001

Recently the steel parts used at automobiles are required to be used under high stress more than ever before in need of the weight down. To achieve this requirement of a high strength steel, it must be necessary to decrease inclusion content and surface defect as like decarburization, surface roughness etc.. In this study, the surface conditions are measured to know the influence on fatigue properties by two cases of shot peening of two-stage shot peening and single-stage shot peening. And for this study, three kinds of spring steel(JISG4081-SUP ,SAE 9254, DIN 50CrV4, ) are made. This study shows the outstanding improvement of fatigue properties at the case of two-stage shot peening in the rotary bending fatigue test and this is assumed to be from (1) Decreasing the surface roughness (2) Unchanging the surface hardness (3) Increasing the compressive residual stress But, results also show fatigue failures originated at inclusion near surface, and this inclusion type is turned out to be a alumina of high hardness.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.218-223
• /
• 2000

The shot peening is largely used for a surface treatment in which small spherical parts called shots are blasted on a surface of a metallic components with velocities up to 100m/s. This treatment leads to an improvement of fatigue behavior due to the developed compressive residual stresses, and so it has gained widespread acceptance in the automobile and aerospace industries. The residual stress profile on surface layer depends on the parameters of shot peening, which are, shot velocity, shot diameter, coverage, impact angle, material properties etc. and the method to confirm this profile is only measurement by X-ray diffractometer. Despite its importance to automobile and aerospace industries, little attention has been devoted to the accurate modelling of the process. In this paper, the simulation technique is applied to predict the magnitude and distribution of the residual stress and plastic deformation caused by shot peening with the help of the finite element analysis.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.88-94
• /
• 2006

The compressive residual stress, which is induced by shot peening process, has the effect of increasing the intrinsic fatigue strength of surface and therefore would be beneficial in reducing the probability of fatigue damage. However, the effect of shot peening in corrosion environment was not known. In this study, investigated is the effect of shot peening on corrosion fatigue crack growth of SAE 5155 steel immersed in 6% $FeCl_3$ solution and corrosion characteristics with considering fracture mechanics. The results of the experimental study corrosion fatigue characteristics of SAE 5155 are as follows; the fatigue crack growth rate of the shot peening material was lower than that of the non-peening material. And fatigue life shows more improvement in the shot peening material than in non-peening material. This is due to the compressive residual stress of surface increases resistance of corrosion fatigue crack propagation. It is assumed that the shot peening process improve corrosive resistance and mechanical property.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.185-192
• /
• 2003

Recently the steel parts used at automobiles are required to be used under high stress more than ever before in need of the weight down. To achieve this requirement of a high strength steel, it must be necessary to decrease inclusion content and surface defect as like decarburization, surface roughness etc.. In this study, the surface conditions are measured to Dow the influence on fatigue properties by two cases of shot peening of two-stage shot peening and single-stage shot peening. And for this study, three kinds of spring steel (JISG4081-SUP7, SAE 9254, DON 50CrV4) are made. This study shows the outstanding improvement of fatigue properties at the case of two-stage shot peening in the rotary bending fatigue test and this is assumed to be from (1) Decreasing the surface roughness (2) Unchanging the surface hardness (3) Increasing the compressive residual stress. But, results also show fatigue failures originated at inclusion near surface, and this inclusion type is turned out to be a alumina of hish hardness.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.4
• /
• pp.426-435
• /
• 2005

The lightness of components required in automobile and machinery industries is requiring high strength of components. Therefore this requirement is accomplished as the process of shot-peening method that the compressive residual stress is made on the metal surface as one of various improvement methods. Special research is, therefore, needed about compressive residual stress on the metal surface in the process of shot-peening method. Therefore, in this paper the effect of compressive residual stress of spring steel(JISG SUP-9) by shot-peening on fatigue crack growth characteristics in environmental condition(temperature) and mechanical condition(shot velocity, stress ratio) was investigated with considering fracture mechanics. By using the methods mentioned above, the following conclusions have been drawn. (1) The fatigue crack growth rate(da/dN) of the shot-peened material was lower than that of the un-peened one. In high temperature range. fatigue crack growth rate decreased with increasing temperature range, while fatigue crack growth rate increased by decreasing temperature in low temperature. (2) Fatigue life shows more improvement in the shot-peened material than in the un-peened material. And compressive residual stress of surface on the shot-peen processed operate resistance force of fatigue crack propagation.

• The Research Journal of the Costume Culture
• /
• v.32 no.1
• /
• pp.17-37
• /
• 2024

This study examines the rise of the Body Positive Movement on TikTok and its role as a form of online content activism influencing the fashion design and industry. Through a combination of literature review and case study methodology, the study explores the expression techniques and thematic types of Body Positive Movement on TikTok. Reviews of literature, previous studies, online articles, fashion journals, and relevant search terms on TikTok informed a definition of Body Positive Movement and an analysis of its formation and rise. The research findings confirm the impact TikTok content on Body Positive Movement has on the fashion industry in addressing external factors (i.e., 'Appearance', 'Race', 'Aging', 'Physical Disability') and intrinsic factors (i.e., 'Acceptance of Diversity', 'Self-Esteem', 'Rejection of Stereotypes', 'Appropriate Representation', 'Information Provision'). The key external factor , 'Appearance', includes subcategories such as 'Body Shape', 'Body Hair', 'Skin', and 'Facial Features'. TikTok content creators on fashion creatively combine music, emojis, and visual storytelling to exhibit positive self-perception concerning these factors. A significant finding of the study is that short clips predominantly manifesting external factors differentiate into informative or enlightening videos associated with intrinsic factors. The study underscores Body Positive Movement's important influence on the fashion industry from design to presentation.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.143-155
• /
• 2012

The research was started out of curiosity for what made 's fast and trilling pace possible although it is an old movie. The center of what made it possible was its use of the Long Take - Long Take was used in all of the scenes and in some cases only long take was used. What is interesting is the film maker's use of various cinematic techniques to prevent the scene from being too slow and keep the audience immersed in the characters. In one shot, acting in addition to Mise-en-Sc$\grave{e}$ne were used to provide psychological immersion of character and scene. The use of Long Take, with the exception of some intentional scenes, was difficult to notice without conscience observation. All the components that make up Long Take. camera walking and lighting as well as actor's dialog and performance and scene movement all beautifully came together. The Long Take is generally replaced by many different sort shots. However, Mike Nichols clearly demonstrates the benefit of Long Take. In the movie, the general aesthetics from the use of Long Take is slightly altered for a different purpose. The specific methods and effects used in the application of Long Take is the subject of this study.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.33-42
• /
• 2002

응용분야가 다양하고 고속 전송 및 노이즈 레벨의 주파수 대역에서 통신을 할 수 있는 UWB(Ultra Wide Band) 기술에 대한 관심이 증폭되고 있다. 울트라 쇼트 펄스파(ultra short pulse)에 정보를 실려 송수신하는 UWB 기술을 근거리 고속 통신이나 휴대용 단말기에 응용하고 저가격의 제품제작을 위하여 저전력 IC 개발은 핵심요소이다. 본 글에서는 UWB IC의 회로 구성 및 동작과 IC 개발업체의 현황을 논한다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.322-327
• /
• 1997

This paper investigates the effects of shot peening on mechanical properties of SAE 9254, which is a spring steel used for the suspension system of automobiles. Rotary Bending Fatigue test is accomplished and the results are summarized as fellows : 1. The tensile strength and the hardness do not change so much. 2. The layer of highly residual stress is obtained by multi-stage shot peening. 3. The fatigue strength seems to be improved by residual stress. 4. The fatigue strength of un-peened and multistage shot peened material are 425 MPa and 756 MPa, respectively.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.286-289
• /
• 2004

본 연구는 U사의 SMD Wave Soldering 공정을 최적화하기 위해 납땜에 관련된 PCB의 여러 계수형 특성들을 종합하여 계량화한 후 분석한 사례이다. SMD Wave Soldering 공정은 PCB 불량의 80% 이상을 결정하는 중요 공정으로 SMD 작업 불량으로 인한 재작업 등 각종 문제점들을 내포하고 있다. 그러나 검사 결과 미납, 냉납, 과납, 쇼트 등의 발생 건수 형태의 계수형 데이터가 집계되어 이를 체계적으로 분석하여 공정을 개선하는데 어려움이 있어 불량 유형별로 보다 세분화된 평가표를 작성하여 먼저 데이터를 계량화한 후 이를 기초로 공정 개선을 실시하였다.