• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.525-527
• /
• 1996

Hysteresis current control is one of the simplest techniques used to control currents for high speed drive systems, because of its simplicity of implementation, fast current control response, and inherent peak current limiting capability. However the conventional fixed-band hysteresis control has a variable switching frequency throughout the fundamental period, and consequently the load current harmonics spreaded on the wide frequency range. In this paper, a simple, novel alterative approach is proposed for a variable-hysteresis band current controller which uses feedback techniques to achieve constant switching frequency with good dynamic response. The method is easily implemented in hardware, the resultant controller is easily tuned to a particular load, and has good immunity to variation in PV parameter and dc supply voltage.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.196-200
• /
• 2005

In this work, we investigated simple Aㅣ/TCO/a-Si:H(n)/c-Si(p)/Al hetero-junction solar cells prepared by low temperature processes, unlike conventional thermal diffused c-Si solar cells. a-Si:H/c-Si hetero-junction solar cells are processed by low temperature deposition of n-type hydrogenated amorphous silicon (a-Si:H) films by plasma-enhanced chemical vapor deposition on textured and flat p-type silicon substrate. A detailed investigation was carried out to acquire optimization and compatibility of amorphous layer, TCO (ZnO:Al) layer depositions by changing the plasma process parameters. As front TCO and back contact, ZnO:Al and AI were deposited by rf magnetron sputtering and e-beam evaporation, respectively. The photovoltaic conversion efficiency under AMI.5 and the quantum efficiency on $1cm^2$ sample have been reported. An efficiency of $12.5\%$ is achieved on hetero-structure solar cells based on p-type crystalline silicon.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.847-849
• /
• 1992

Fluorine-doped ($SnO_2$:F) thin films obtained by pyrosol deposition method have been exposed to R.F. excited pure hydrogen plasma under the following conditions; substrate temperature of 200$^{\circ}C$, $H_2$ pressure of 1 Torr, R.F. input power of 50 mW/$\textrm{cm}^{2}$, $H_2$ flow rate of 30cc/min and exposure time of 15-600 seconds. It is found that the sheet resistance of the films remains unchanged or rather slightly reduces for initial exposure time of 30-60 seconds, but increases sharply with further increasing the exposure time. The optical transmittance of $SnO_2$:F films slows a rapid fall with increasing exposure time except for a film obtained with a solution having $CH_3OH/H_2O$ mol ratio of 2.65, its degradations at the exposure time of 30-60 seconds are about 7-15%. In addition, the exposure of the films to hydrogen plasma atmosphere leads to remarkable changes in the microstructure and chemical composition, which should be attributed to the reduction of $SnO_2$ to SnO and to elemental Sn.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.172-175
• /
• 2009

n-type crystalline silicon wafers were passivated with intrinsic a-Si:H thin films on both sides using HWCVD. Minority carrier lifetime measurement was used to verify interface passivation properties between a-Si:H thin film and crystalline Si wafer. Thin film interface characteristics were investigated depending on $H_2/SiH_4$ ratio and hot wire deposition temperature. Vacuum annealing were processed after deposition a-Si:H thin films on both sides to investigate thermal effects from post process steps. We noticed the effect of interface passivation properties according to $H_2/SiH_4$ ratio and hot wire deposition temperature, and we had maximum point of minority carrier lifetime at H2/SiH4 10 ratio and $1600^{\circ}C$ wire temperature.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.129.1-129.1
• /
• 2011

a-Si:H/c-Si 구조의 이종접합 태양전지 전면 투명전도막으로 Indium tin oxide(ITO) 박막의 조건에 따라 태양전지 특성을 연구하였다. ITO 박막은 파우더 타겟으로 마그네트론 스퍼터링 방식으로 성막하였고, 증착 온도(Ts)에 따라 전기적, 광학적 특성을 비교, 분석하였다. 기판 증착 온도가 증가할수록 박막의 저항이 낮아지는 것으로 나타났으며 $350^{\circ}C$ 조건에서 가장 낮은 저항($34.2{\Omega}$/sq)을 보였다. 투과도 또한 기판 증착 온도가 올라갈수록 전반적인 향상을 나타냈다. a-Si:H/c-Si 기판의 MCLT(minority carrier lifetime)는 $350^{\circ}C$에서 최적($359{\mu}s$)의 결과를 나타냈다. 그 이상의 기판 온도에서는 오히려 감소하였는데, 이는 높은 온도에서의 a-Si:H/c-Si 계면의 열손상으로 판단된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.32-32
• /
• 2009

실리콘 박막 태양전지에서 전면 투명전도막(TCO)은 태양전지의 전기, 광학적 특성을 결정하는 중요한 기능을 한다. ZnO:Al TCO는 기존에 사용되던 $SnO_2:F$와는 비정질 실리콘(a-Si:H) 박막 태양전지의 윈도우 층으로 사용되는 p a-SiC:H와의 일함수(work function) 차이로 인해 접촉전위(contact barrier)를 형성하게 되며 이로 인해 태양전지의 충진율(fill factor)이 $SnO_2:F$에 비해 감소하는 단점을 보인다. 본 연구에서는 ZnO:Al/p a-SiC:H 계면의 접촉전위 발생원인 및 태양전지 충진율 감소현상에 관한 정확한 원인규명을 위해 다양한 특성을 갖는 버퍼층을 삽입하여 계면특성 및 태양전지의 동작특성을 분석하고자 한다.

• 전력전자학회논문지
• /
• 제8권4호
• /
• pp.344-350
• /
• 2003

본 논문에서는 스위치드 릴럭턴스 모터의 새로운 회전자 초기 위치 추정법을 제안한다. 회전자의 위치검출을 하기 위하여 서치 코일을 사용하는 경우 센서비용감소, 부피감소, 강인성 증대, 사용범위의 확대 등 많은 장점이 있다. 그러나 모터의 회전자가 초기에 회전하지 않기 때문에, 서치코일에 유기되는 기전력이 존재하지 않아 회전자의 초기 위치검출에 어려움이 있었다. 본 논문에서는 유클리디안 제곱거리(Squared Euclidean Distance)를 사용하여 초기에 회전자가 정지해 있을 경우에도 회전자의 위치를 정확하게 추정하는 방법을 제시하였다. 이를 위하여 시뮬레이션을 실시하였고 이를 토대로 실험한 결과 정확한 초기 회전자 위치를 추정함으로써 본 논문에서 제시한 방법의 타당성을 검증하였다.

• 한방안이비인후피부과학회지
• /
• 제22권2호
• /
• pp.39-49
• /
• 2009

Objective : Phyllostachyos Folium (PF) has been used to treat patients with febrile disease consuming the body fluids marked by fever with restlessness, thirst etc. In the theory of herbology, PF can clear away heat and promote the production of the body fluids, relieve restlessness. Recently PF is known to have anti-bacterial, anti-oxidantic effects. Methods : The present study was carried out to investigate the effects of PF on solid tumor in mice in terms of immune-potentiating and direct cytotoxic action of PF in vitro and vivo study. The present author investigated thymocyte and splenocyte proliferation to confirm immune-potentiating activity of PF and also investigated tumor/body weight ratio and survival rates in tumor bearing mice. Result : In this study, administration of PF decreased tumor/body weight ratio significantly, and prolonged survival duration compared to non-treated control. In addition, treatment with PF suppressed proliferation rate of Sarcoma 180 (S-180) cells significantly, and elevated proliferation rates of thymocytes isolated from normal mice. These results were co-related with in vivo study. Conclusion : In conclusion, these results suggest that PF is useful to treat patient with solid tumor, because PF has direct toxic action for tumor cell and immune -potentiating action for T cells. Further study will need to elucidate exact mechanisms related in anti-cancer action of PF.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1427-1429
• /
• 2001

Polycrystalline silicon(poly-Si) films are deposited on low temperature glass substrate by Hot-Wire CVD(HWCVD). The structural properties of the poly-Si films are strongly dependent on the wire temperature($T_w$). The films deposited at high $T_w$ of 2000$^{\circ}C$ have superior crystalline properties; average lateral grain sizes are larger than $1{\mu}m$ and there at·e no vertical grain boundaries. The surface of the high $T_w$ samples are naturally textured like pyramid shape. These large grain size and textured surface are believed to give high current density when applied to solar cells. However, the poly-si films are structurally porous and contains high defect density, by which high concentration of C and O resulted within the films by air-penetration after removed from chamber.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1518-1520
• /
• 2001

Bi-layer Mo films were deposited on sodalime glass substrates using DC magnetron sputtering. As the gas pressure and power density, the resistivity varied from $1.5{\times}10^{-5}$ to $4.97{\times}10^{-4}{\Omega}{\cdot}cm$. Furthermore, stress direction yielded compressive-to-tensile transition stress curves. The microstructure of the compressive stress films which had poor adhesion consists of tightly packed columns, but of the tensile-stressed films had less dense structure. Under all gas pressure conditions, Mo films exhibited distinctly increasing optical reflection with decreasing gas pressure. The expansion of (110) peak width with the gas pressure meant the worse crystalline growth. Also, The highest efficiency was 15.2% on 0.2 $cm^2$. The fill factor, open circuit voltage and short circuit current were 63 %, 570 mV and 42.6 mA/$cm^2$ respectively.