• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.577-583
• /
• 2011

Radar performance test is one of the major steps for radar system design. However, it is restricted by time and cost when radar performance tests are performed with opportunity targets. So various simulated target generators are developed and used to evaluate radar performance. To simulate the target's range, most of simulated target generators are developed with optical line or DRFM(Digital RF Memory) technique but there are many restrictions such as limit of range imitation and test scenario because of their original usage. In this paper, DDL(Digital Delay Line) module for development of simulated target generator is designed with precise range simulation and easily embodiment feature. And pulse recognition and delay gap detection technique are used to simulate the time delay without distortions. Developed DDL module performances are verified through their performance tests and test results are described in this paper.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.45-49
• /
• 2020

FEU which is a important device in HCTRS of TICN amplifies transmission signals. Tests of intermodulation distortion and harmonic distortion for FEU have been performed manually, and take a lot of time. This paper improves the test methods using program that set up the measurement instruments and read the data automatically. This proposal allows intermodulation distortion and harmonic distortion test simultaneously. And the new test methods show that the measurement time is shorter than before. Also, it is expected that efficient quality assurance is possible because the test time can be independently managed, unlike the previous methods, where the test time was determined according to the skill level of the operator.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.585-587
• /
• 2022

The visual motivation between AP devices is NTP-based visual motivation through the access of the Internet through the internal wired LAN, but this has several seconds of visual difference in hundreds of milliseconds (msec) depending on the network. The frame for the output of the video will vary depending on the application, but usually 24 (image) frames are output to the screen in one second. Therefore, the visual synchronization between peripheral devices can be performed through the adjacent moving camera device, not the wired method. The programming method of generating API for synchronization command when creating an application for visual synchronization and delivering it to AP through MAC may differ from the time in synchronization command according to the environment of the operating system at the transmission side and the situation of the buffer queue of the MAC. Therefore, as a method to solve this problem, the renewal of visual information in the device driver terminal controlling MAC can be much more effective.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.217-225
• /
• 2024

Even after the introduction of Global Maritime Distress and Safety System (GMDSS), many maritime accidents occur. A method of transmitting a rescue signal when a person falls into the water from a ship is currently being researched and developed in various ways, but no products have been developed that use frequencies allocated for maritime mobile service. Accordingly, in this study, we designed and produced a man-over-board (MOB) device by applying Group B AMRD technologies, which were adopted through the latest revision of the International Telecommunication Union (ITU). In addition, a receiver and user interface were built to verify the performance of the transmitter, and we confirmed that it can be used in conjunction with existing electronic charts. This MOB device satisfies the general and technical requirements of Group B AMRD using AIS technology and uses integrated components for miniaturization for easy portability in a maritime environment. We expect that it will achieve excellent AIS communication and be essential in rapid response and safety in emergency scenarios.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.922-929
• /
• 2005

This paper proposes an adaptive pilot beacon equipment for mobile communication systems based on direct spread spectrum technology which generates the pilot channel for handoff between base stations by using the information acquired from the downstream wireless signal regarding the overhead channel information. Such an adaptive pilot beacon equipment will enable low power operation since among the wireless signals, only the pilot channel will be generated and transmitted. The pilot channel in the downstream link of the CDMA receiver is used to acquire time and frequency synchronization and this is used to calibrate the offset for the beacon, which implies that time synchronization using GPS is not required and any location where forward receive signal can be received can be used as the installation site. The downstream link pilot signal searching within the CDMA receiver is performed by FPGA and DSP. The FPGA is used to perform the initial synchronization for the pilot searcher and DSP is used to perform the offset correction between beacon clock and base station clock. The CDMA transmitter the adaptive pilot beacon equipment will use the timing offset information in the pilot channel acquired from the CDMA receiver and generate the downstream link pilot signal synchronized to the base station. The intermediate frequency signal is passed through the FIR filter and subsequently upconverted and amplified before being radiated through the antenna.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.12a
• /
• pp.209-218
• /
• 1999

처방전달시스템은 처방의 수행은 의사가, 그에 따른 의약품조제는 약사가 수행함으로써 의약품의 오․남용을 방지하기 위한 의약분업의 실시에 따른 국민불편의 최소화와 약화사고에 따른 인증문제 등을 지원하기 위한 정보시스템이다. 처방전달시스템은 환자 개인정보의 허용된 범위 내에서의 공유와 공유를 위한 각종 개인정보 보호장치, 처방의 안전한 전달을 위한 내용의 비밀보장과 위변조방지 및 송신자와 수신자의 인증을 위한 장치가 필수적으로 필요하다. 또한 자료의 생명주기 측면에서 본다면, 처방전의 생성은 병․의원에서 이루어지며 소멸은 약국 및 환자에의해 이루어진다. 자료의 유통과정에 살펴보면 처방전달시스템의 주요성공요인은 정보의 생산자인 병․의원(의사)의 적극적인 정보제공의지와 이를 지원하는 편리한 정보시스템의 구축이라고 할 수 있다. 정보의 생산자인 병․의원 정보시스템 환경은 다양하고 복잡하기 때문에 기존의 애플리케이션을 이용하면서 처방의 전송을 위해서는 기존 애플리케이션 및 플랫폼에 독립적이며 자료의 적합한 취합과 통합이 가능하도록 지원하는 시스템이 필요하다. 처방전달 메시징시스템은 이러한 복합적인 정보시스템 환경을 지원하며 동시에 처방정보의 안전한 전달을 위해 플랫폼으로 실행될 수 있는 시스템을 말한다. 또한 처방의 비교적 짧은 생명주기와 지역적 생산, 유통구조를 적합하게 지원하기 위해 지역별 독립시스템의 구축과 공통정보 활용을 위한 중앙시스템과의 역할분담 모델에 근거한 분산시스템의 구축이 요구된다. 본 연구에서의 처방전달 메시징시스템은 일반적인 메시지서비스의 특성을 기본으로 자료전달을 위해 자료 암호화와 복호화, 송신자와 수신자에 대한 인증 및 자료접근 제한기능을 제공하며 각 클라이언트와 서버간의 실시간 연결 혹은 지연연결을 지원하는 독립적인 애플리케이션이다. 이러한 처방전달 메시징시스템을 구성하는 각 요소에 대해 정의하고 개념적 모델을 설계하고자 한다.에게 청구되며, 소비자에게 전송 되는 청구서는 사용자DB를 참조하여 사용자가 미리 정의한 원하는 형태로 변환되어 전달되며, 필요시 암호화 과정을 거치는 것이 가능해야 한다. 전송된 청구서는 전자우편의 경우, 암호해독이 가능한 전용 브라우저를 통해 열람 되며, 이는 다시 전용 브라우저를 통해 지불인증이 승인되어 청구 제시서버에게 전송된다. EBPP 시스템의 제어 흐름은 크게 기업이 청구 정보를 소비자에게 제시하는 흐름과 소비자의 지불 승인으로 인해 기업이 은행에 지불을 요구하는 흐름으로 구분할 수 있다. 본 논문에서는 통합 청구서버 및 정구 제시서버의 역할 및 구성 요소들에 대해 서술하고, EBPP 시스템과 연동하여야 하는 메일 서버와의 상호 작용에 대해 서술할 것이다. 본 시스템을 아직 구현이 되지 않은 관계로 시스템의 성능 등의 수치적 결과를 제시할 수 없는 상태다., 취약계층을 위한 일차의료, 의약관리), ${\circled}2$ 보건소 조직 개편 및 민간의료기관과 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(關係)있음을 시사(示唆)해 주고 있다.ble nutrient (TDN) was highest in booting stage (59.7%); however no significant difference was found among other stages. The concentrations of Ca and P were not different among mature stages. According to these results, the yellow ripe period is appropriate to harvest the whole crop rice for forage considering dry matter yields,

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.8
• /
• pp.573-581
• /
• 2022

This paper deals with the development of CanSat system, which ejects two maple seed-type autorotating science payloads and collects weather information. The CanSat consists of two autorotating science payloads and a container. The container is equipped with devices for launching science payloads and communication with the ground station, and launches science payloads one by one at different designated altitudes. The science payload consists of a space for loading and a large wing, and rotates to generate lift for slowing down the fall speed. Specifically, after being ejected, it descends at a speed of 20 m/s or less, measures the rotation rate, atmospheric pressure, and temperature, and transmits the measured value to the container at a rate of once per second. The communication system is a master-slave structure, and the science payload transmits all data to the master container, which aggregates both the received data and its own data, and transmits it to the ground station. All telemetry can be checked in real time using the ground station software developed in-house. A simulation was performed in the simulation environment, and the performance of the CanSat system that satisfies the mission requirements was confirmed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.3
• /
• pp.172-177
• /
• 2023

In this paper, 2-dimensional backtracking method for ultrasonic signals. Ultrasonic sensors are a common technology used in industrial fields as many studies have been conducted on distance measurement and indoor location tracking using transmission and reception devices in pairs. A method for tracking a signal of an arbitrary ultrasonic transmission device on a 2D plane using only a receiver of an ultrasonic signal is proposed. In order to track the ultrasonic signal, the receiver receives the signal by making at least three. The three receivers may calculate a direction and a distance using a time difference in which the ultrasound reception sound is reached. The existing method of tracking signal sources using ultrasonic waves has a problem of time synchronization of devices because the transceivers must be paired or installed independently for each sensor. In order to solve this problem, the distance of the ultrasonic receiver is minimized, and it is configured as one device. The sensor installed as one device may be processed by one operator, thereby solving the time synchronization problem. To increase time difference accuracy, high-speed 32-bit timers with high time resolution can be used to quickly calculate and track distances and directions.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.186-189
• /
• 2019

NFSC 202 stipulates that if a loudspeaker or wiring on one floor of a building is shorted because of fire, it should not interfere with the fire notification on the other floors. To address this problem, this study proposes an ultrasonic transmitter/receiver consisting of an ADC, HPF, and LPF in an emergency broadcasting system that can operate regardless of the volume level of the amplifier output loudspeaker capacity. After transmitting the transmission frequency at -12 dB (110 kHz), it is received at -18 dB by transmitting -12 dB in case of short circuit depending on the frequency characteristics. Typically, depending on the loudspeaker capacity, it is received from -24 dB to -66 dB. In case of disconnection, it exceeds -66 dB and no data are received. It is also possible to check the track status during fire or general broadcasting. Thus, it was confirmed that the system is suitable for NFSC 202 regulations. Furthermore, as the current system is replaced, the inspection or test criteria should be amended or revised.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.143-150
• /
• 2018

This work conducted the experimental analysis on ultrasonic acoustic matching in order to measure the accuracy of gaseous fuel level values. The experimental devices were used as 12V-DC supply, control T1 board, oscilloscope (DS01072B), ultrasonic probe and pattern table. The research models were designed by ceramic assay which can determine the transmitting and receiving energies. The result of the ringing area could verify the increased characteristics in the order of D (0.180m) < E (0.184m) < B (0.204m) < A (0.234m) < F (0.244m) < C (0.247m) models based on initial 2.9V of the maximum peak voltage. From the experimental results, the model designed by Ø21*3+2t of the matching layer was notable in that the most outstanding directivity energy could be created.