• Geophysics and Geophysical Exploration
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2018

In the two-dimensional (2D) modeling of electrical method, the potential in the space domain is reconstructed with the calculated potentials in the wavenumber domain using inverse Fourier transform. The inverse Fourier integral is numerically evaluated using the transformed potential at different wavenumbers. In order to improve the precision of the integration, either the logarithmic or exponential approximation has been used depending on the size of wavenumber. Two numerical methods have been generally used to evaluate the integral; interval integration and Gaussian quadrature. However, both methods do not consider the distance from the current source. Thus the resulting potential in the space domain shows some error. Especially when the distance from the current source is very small or large, the error increases abruptly and the evaluated potential becomes extremely unstable. In this study, we developed a new method to calculate the integral accurately by introducing the distance from the current source to the rescaled Gauss abscissa and weight. The numerical tests for homogeneous half-space model show that the developed method can yield the error level lower than 0.4 percent over the various distances from the current source.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.29-32
• /
• 2002

본 논문은 수평적 시공간 부호화 기법(Horizontal Space-Time Coding)과 송수신단에 별도의 빔형성 기법을 결합한 JBSTC(Joint Beamforming Space-Time Coding) 구조에 대한 제안 및 동작원리를 기술하고 성능을 분석하였다. JBSTC는 MIMO(Multi-Input Multi-Output) 송수신 시스템 채널 모델링을 기반으로 송신측 안테나간 상호 상관 행렬과 수신측 안테나간 상호 상관 행렬을 이용하여 송수신 빔형성기의 안테나 가중치들을 계산한다. 본 논문에서 제안하는 JBSTC 방식은 송수신단에서 발생하는 안테나 간격과 각퍼짐에 따른 상호 상관 값을 효과적으로 보정함으로써 기존의 수평적 시공간 부호화 기법보다 우수함을 알 수 있다.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.13 no.4
• /
• pp.112-123
• /
• 2017

Research for the inverse estimation of RF threats and the efficient electronic attack based on the parameters of the electronic information has been active in the electronic warfare (EW) situations. In this paper, an EW transmission simulator is constructed from the modeling of radar threats, EW receivers, and propagation environments with the collected electronic information in order to verify the performance of the inverse estimation algorithm in various and practical EW situations. In simulation results, we show that the range tracking error and angle tracking error are produced within ten meters and one degree, respectively. And also, we show that the changing relations between the angle tracking error and the parameters of the monopulse angle tracking radar such as the beamwidth and squint angle in simulation results correspond with those in the theoretical modeling. Accordingly, the constructed EW simulator can be used to observe the modifying characteristics of the electronic information in transmission environments, and then, to evaluate the performance of the inverse estimation system in various EW situations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.558-565
• /
• 2013

In this paper, modeling and simulation for performance analysis of high resolution SAR system has been carried out in the time, frequency and numeric domain using ADS Ptolemy simulation tool of Agilent corporation. SAR system consists of antenna, controller and transceiver. Error parameters affecting SAR system performances have been defined, modeled and simulated such as phase noise of frequency synthesizer, amplitude and phase characteristic of TWTA, sampling frequency of waveform generator and I/Q imbalance. Finally, the development requirements of SAR system based on the impulse response function have been derived.

• Geophysics and Geophysical Exploration
• /
• v.6 no.1
• /
• pp.13-22
• /
• 2003

TSP (Tunnel Seismic Profiling) survey is a technique for imaging and characterizing geological structures ahead of a tunnel face. The seismic modeling algorithm and the synthetic data could be helpful for TSP surveys. However, there is few algorithm to describe the propagation of the elastic waves around the tunnel. In this study, existing 2-dimensional seismic modeling algorithm using finite element method was modified to make a suitable algorithm for TSP modeling. Using this algorithm, TSP modeling was practiced in some models. And the synthetic data was analyzed to examine the propagation characteristics of the elastic waves. First of all, the modeling for the homogeneous tunnel model was practiced to examine the propagation characteristics of the direct waves in the vicinity of the tunnel. And the algorithm was applied to some models having reflector which is perpendicular or parallel to the excavation direction. From these, the propagation characteristics of the reflected waves were examined. Furthermore, two source-receiver arrays were used in respective models to investigate the properties of the two arrays. These modeling algorithm and synthetic data could be helpful in interpreting TSP survey data, developing inversion algorithm and designing new source-receiver arrays.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.455-456
• /
• 2015

본 논문에서는 무선전력 전송을 위한 평판 나선형 코일의 최적 형상 선정을 위해 각 코일의 형태에 따른 출력 성능을 비교 및 평가한다. 코일 간 결합계수, 각 코일의 Q-factor 측면에서 송수신 패드의 성능을 비교하며, 이를 위해 송수신 패드가 차지하는 면적을 최대한 활용하여 모델링 한다. 모델링한 코일에 대하여 수신패드의 수직 및 수평이동에 대한 성능 지표를 평가하고 코일의 최적 형상을 선정한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.3-9
• /
• 2014

We propose energy efficient transmit and receive strategies for nomadic M2M devices. Recently, communication applications consume more and more battery. Hence, the efficient battery management is becoming increasingly important. Turbo code as a channel coding is being widely used in many communication areas. Accordingly, the efficient energy management in using turbo code is an important issue. In this paper, we optimize joint transmit and receive energy for M2M devices pair. We first model the transmit energy and receive energy. Then, we develop the energy efficient transmit and receive strategies.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.93-98
• /
• 2005

Silicon bipolar transistors (Si-BJT) are widely used in the telecommunication system such as short range wireless control and wireless indoor voice communication system. New modeling method for the internal current source model of Si-BJT is proposed. The proposed method based on new thermal resistance extraction method and new analytical expressions for the current source parameters of Si-BJT. The proposed method can directly extract the model parameters without any optimization procedure which is adopted in the conventional modeling method. The proposed method is applied to 5 finger $0.4\times20[{\mu}m^2]$ and the model shows good prediction of the measured data in $3[\%]$ of errors proving the validity of this method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.7
• /
• pp.17-22
• /
• 2011

To propose effective signaling scheme for inductive coupling link, inductive coupling channel and signaling schemes are analyzed. For fair comparison of various signaling schemes, a signal quality factor ($Q_{signal}$) is introduced and the NRZ signal scheme shows better signal quality factor than BPM signaling schemes. For simulation, the transmitter for inductive coupling link is designed with 0.13 ${\mu}m$ CMOS process and the inductor is modeled as spiral inductor in chip.

• Proceedings of the KSEEG Conference
• /
• 2002.04a
• /
• pp.198-200
• /
• 2002

경제적이며 정확한 3차원 전자탐사 모델링을 위해 위해 Habashy et al. (1993)에 의해 제안된 국소 비선형 근사(localized nonlinear approximation)를 이용하여 전자탐사 모델링 알고리듬을 개발하였다. 전자탐사 수치모델링시 많은 계산시간 및 기억용량을 필요로 하는 Green 텐서 적분을 정확하고 빠르게 계산하기 위해, 단일 미소체를 이용한 공간파수 영역에서의 Green 텐서 적분 알고리듬을 제안하였다. 더욱이 Green 텐서의 송수신 방향 및 상반성을 고려하여 각각의 미소체에 의한 전체 미소체에의 Green 텐서 적분을 한 개의 미소체에 의한 전체 미소체에의 Green 텐서 적분 값으로 구하게 하므로 매우 적은 기억용량 만으로 Green 텐서 적분 행렬을 구성할 수 있어, 역산법에 효과적으로 적용할 수 있다. 이 수치 모델링 알고리듬을 기본으로 하여 평활화 제한을 가한 최소자승 역산 알고리듬을 개발하였다. 이 역산 알고리듬을 지표 전자탐사 및 시추공-지표 전자탐사 등에 적용하여 PC에서도 빠르게 3차원 전자탐사 역산이 수행됨을 보였다.