• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.4
• /
• pp.301-307
• /
• 2009

In the previous study, we evaluated and reported about the anti-oxidative activities of extract/fraction of Castanea crenata leaf. Extract/fraction of Castanea crenata leaf showed excellent free radical scavenging activity, cell protective activity and inhibitory activity on tyrosinase and elastase. In this study, in order to investigate the stability of cream containing 0.2 % Castanea crenata ethyl acetate fraction. pH, viscosity, and absorbance were measured under 4 different temperature ($4^{\circ}C$, $20^{\circ}C$, $37^{\circ}C$, $45^{\circ}C)$ and under the sun light at 2 weeks intervals for the 8 weeks. The variations on pH and viscosity of all experimental creams were similar to control cream. The absorbance variation of extract from experimental cream at 353 nm was in the order: under the sun > $45^{\circ}C$ > $37^{\circ}C$ > $20^{\circ}C$ > $4^{\circ}C$. It shows that ethyl acetate fraction in the cream can be oxidized under the sun. The bad smell and discoloration were not shown. Also, physical changes as creaming and cohesion were not shown. Also, transepidermal water loss (TEWL) and water contents in skin were measured. The cream containing Castanea cranata leaf extract was applied to the right lower arm. After 120 min, TEWL of parts was decreased as 29.7 % (experimental cream) and 5.4 % (control cream) respectively. And the water contents in skin were increased 22.6 % (experimental cream) and 24.7 % (control cream) respectively. It was confirmed that a cream containing ethyl acetate fraction of Castanea crenata leaf shows the superior moisturizing effect. The results showed that Castanea crenata leaf extract could be used as a new active ingredient for anti-aging cosmeceuticals.

• Journal of Veterinary Clinics
• /
• v.29 no.4
• /
• pp.283-296
• /
• 2012

Allergic contact dermatitis (ACD) is an inflammatory skin disease and regarded as a prototype of T-cell mediated delayed-type hypersensitivity reactions. Poly-${\gamma}$-glutamic acid (PGA) is a biodegradable polymer that is produced by Bacillus subtilis. This study was performed to assess the effects of PGA in a canine model of ACD. ACD was induced on the back of dogs induced by sensitization and repeated application by 2,4-dinitro-1-chlorobenzene (DNCB). Topical treatment of PGA was applied once a day for 12 days and skin biophysical parameters including transepidermal water loss (TEWL), skin hydration, skin pH, skin thickness and erythema index, were measured every two days during experimental periods. Histopathology and immunohistochemistry were performed to evaluate the antiinflammatory effect. In skin biophysical parameters, TEWL, skin hydration, skin thickness and erythema index were significantly increased, with a maximum increase appeared on day 2 (p < 0.05). On the other hand, skin pH was significantly decreased, with a maximum decrease appeared on day 2 (p < 0.01). After the completion of PGA treatment, skin biophysical parameters were significantly reached those of baseline in a time-dependent manner (p < 0.05). In histopathology, marked increases of epidermal thicknesses were induced after DNCB challenge with numerous inflammatory cell infiltrations and edematous changes, decreases of connective tissue occupied regions in dermis. In addition, marked increases of cytokine - tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$) and interferon-${\gamma}$ (IFN-${\gamma}$)-immunoreactivities in the dermis and of apoptotic markers - caspase-3 and PARP-immunoreactivities in the epidermis were observed in DNCB-PBS control as compared with intact control, respectively (p < 0.01). It means, the ACD and related apoptotic changes were induced by DNCB in the present study. However, these ACD induced by DNCB and related apoptosis in epidermis were significantly inhibited by treatment of PGA treated skin, the decreases of infiltrated inflammatory cells and related decreases of pro-inflammatory cytokine immunoreactivities were also observed (p < 0.01). Based on these findings, PGA may have anti-inflammatory and alleviatory effects in the allergic contact dermatitis.

• Korean journal of food and cookery science
• /
• v.26 no.2
• /
• pp.198-205
• /
• 2010

In this study, the effect of added cashew nuts on the quality characteristics of pound cake were investigated. The weight and volume of the cake increased with the addition of cashew nuts concentration, whereas the dough yield and baking loss decreased. Furthermore, the hardness, penetration and, degree of retrogradation significantly decreased during storage with the addition of cashew nuts. As the cashew concentration was increased, the lightness and redness values of the crumb decreased and the yellowness values increased. In terms of sensory evaluation, when compared to the control group, the cashew nuts pound cake was superior in taste, flavor, chewiness and overall acceptability.

• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.107-113
• /
• 2010

In this study, the relative effects of low-chloride deicier(LCD) and two other deicing agents on the scaling of concrete were conducted in a series of tests at laboratory accordance with the ASTM C 672. The solutions concentration of deicers tested included 1, 4, 10%. Tap water was used as control. The amount of scaling was evaluated gravimetrically. As test result of deicer solution types, when applied to 4% solutions, surface scaling of concrete after 56 freeze-thaw cycles was produced significantly as about 9 times on LCD solution, as about 18 times on $CaCl_2$ solution, and as about 33 times on NaCl solution comparing with tap water. As test result of deicer solution concentrations, relatively low concentrations (of the 4% by weight) of deicer were produced more surface scaling than higher concentrations (of the 10% by weight) or lower concentrations (of the 1% by weight) of deicer. It show that the damaging concentration is of the order of 3~4% for previous research result. It appears that the mechanism of surface scaling is primarily physical rather than chemical. Also, the effect of chloride deicier types, freeze-thaw cycling, and air contents on the performance of concrete was experimentally investigated. The results show that the concrete specimens subjected to freeze-thaw cycling scaled more severely in exposure to deicing salt than those in non-exposure to deicing salt, weight losses of the specimens tested in exposure to deicing salt were twice as much as those tested in non-exposure to deicing salt. Relative dynamic modulus of elasticity of concrete specimens decreased more quickly in exposure to deicing salt than in non-exposure to deicing salt. Also, relative dynamic modulus of elasticity of concrete specimens in exposure to sodium chloride deicing salt was decreased more quickly comparing with exposure to LCD salt. It is also shown that the chloride contents according to concrete specimen depths was more largely in exposure to LCD salt. When concrete specimen is exposed to chloride deicing salts and freeze-thaw cycling, performance degradation in the entrained air concrete(AE concrete) retarded more considerably comparing with non-entrained air concrete(Non-AE concrete).

• Food Science of Animal Resources
• /
• v.28 no.2
• /
• pp.171-180
• /
• 2008

This study was conducted to investigate the meat quality characteristics of pork loin in 3 crossbred groups (30 pigs/group). The crossbreeds were LY female${\times}$D male, Y female${\times}$B male and L female${\times}$B male (L: Landrace, Y: Yorkshire, B: Berkshire, D: Duroc). Pork loins were collected from animals ($110{\times}120kg$ body weight) slaughtered in a commercial slaughter house and stored at $-3^{\circ}C$. Samples were analyzed for general composition, physico-chemical properties, meat and fat color, texture characteristics, sensory evaluation and fatty acid composition at 24 hrs postmortem, and TBARS (Thiobarbituric Acid Reactive Substances) values were determined at various storage times. The LYD pigs showed a higher back fat thickness than the YB and LB pigs. There were no significant differences in intramuscular fat, intermuscular fat, subcutaneous fat and springiness among the 3 crossbreeds. In addition, there were no significant differences in general composition, pH, drip loss, cooking loss and cooked sensory evaluation among the 3 crossbreeds (p>0.05). The shear force value of LB pork was significantly lower than other crossbreeds (p<0.05). Total heme pigment was significantly higher in YB pork compared to LYD and LB pork (p<0.05). The TBARS value of YB pork was significantly lower than that of LYD pork, except after the I day of storage (p>0.05). TBARS values increased significantly during storage for all three crossbreeds. The lightness (CIE L) of YB pork was significantly lower, while the redness (CIE a) was significantly higher in YB pork relative to the other crossbreeds. With regard to textural properties, the hardness and adhesiveness values were significantly lower in YB pork compared to LB pork. In fresh meat, the color of YB pork was significantly higher than the other breeds (p<0.05). The content of myristic acid (C14:0) was significantly lower, while the content of arachidonic acid (C20:4) was significantly higher in LB pork (p<0.05). These results show that the YB breed has the highest quality meat of the three crossbreeds.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.664-671
• /
• 2017

Non-point source pollution is the emission source that unspecifically releases pollutants to water system from unspecific places such as cities, agricultural lands, mountains, and construction sites and its discharge path is not easily identified. Also, it is difficult to design and manage the reduction facilities for the emission quantity is primarily affected from weather conditions like rainfall. Since 2006, the significance of non-point source pollution reduction has been grown in Republic of Korea and this reinforces needs for the installation of reduction facilities. However, because the standards for the installation details and reduction efficiency are not clarified by law, people are preferring technologies that do not require particular maintenance and high expenses. The purpose of this study is to examine and maintain the efficiency of non-point source pollutants reduction facility which uses expended polypropylene as a media. The higher the depth of the media, the less range of variations in the reduction efficiency was observed and the final efficiency was also increased. When the media depth was 60 cm, the average reduction efficiency was 94% and 90% where linear velocities were 10 m/hr and 20 m/hr respectively. The results from 180 minutes operation in 10 m/hr and 20 m/hr of linear velocities were slightly different in head loss changes which were caused by media depth variations. The backwash experiments which were conducted in triplicate showed the reduction efficiency decreased as the time went on because of the media clogging. However, it was found that after the backwashing the reduction efficiency was increased as effective as the efficiency of the initial filtration.

• Korean journal of food and cookery science
• /
• v.22 no.6 s.96
• /
• pp.808-814
• /
• 2006

The effects of vegetable oils addition on the quality characteristic of pound cake were investigated. The volume of pound cake prepared by adding vegetable oils increased from 1005.8 to 1075.8 mL, compared to 752.8 mL for the control. The volume index of pound cake prepared by adding vegetable oils increased by 3.46${\sim}$3.65, compared to 2.88 for the control. The hardness and penetration of pound cake with added vegetable oils were decreased significantly compared to those of the control during storage for 72 hours. The texture of pound cake with added vegetable oils was not decreased compared to that of the control. The lightness and yellowness values of the cake increased and the redness values of the cake decreased by adding vegetable oils compared to those of the control. The sensory quality of the pound cake with added vegetable oils, as estimated by color, taste, moistness and overall acceptability, was better than that of the control.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.29-40
• /
• 2005

According as base of digital hologram has been magnified, discussion of compression technology is expected as a international standard which defines the compression technique of 3D image and video has been progressed in form of 3DAV which is a part of MPEG. As we can identify in case of 3DAV, the coding technique has high possibility to be formed into the hybrid type which is a merged, refined, or mixid with the various previous technique. Therefore, we wish to present the relationship between various image/video coding techniques and digital hologram In this paper, we propose an efficient coding method of digital hologram using standard compression tools for video and image. At first, we convert fringe patterns into video data using a principle of CGH(Computer Generated Hologram), and then encode it. In this research, we propose a compression algorithm is made up of various method such as pre-processing for transform, local segmentation with global information of object image, frequency transform for coding, scanning to make fringe to video stream, classification of coefficients, and hybrid video coding. Finally the proposed hybrid compression algorithm is all of these methods. The tool for still image coding is JPEG2000, and the toots for video coding include various international compression algorithm such as MPEG-2, MPEG-4, and H.264 and various lossless compression algorithm. The proposed algorithm illustrated that it have better properties for reconstruction than the previous researches on far greater compression rate above from four times to eight times as much. Therefore we expect that the proposed technique for digital hologram coding is to be a good preceding research.

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.1-8
• /
• 2020

Centrifugal pump is a facility that transfers energy to fluid through centrifugal force, which is usually generated by rotating the impeller at high speed, and is a major process facility used in many LNG production bases such as vaporization seawater pump, industrial water and fire extinguishing pump using seawater. to be. Currently, pumps in LNG plant sites are subject to operating conditions that vary depending on the amount of supply desired by the customer for a long period of time. Pumps in particular occupy a large part of the consumption strategy at the plant site, and if the optimum operation condition is not available, it can incur enormous energy loss in long term plant operation. In order to solve this problem, it is necessary to identify the performance deterioration factor through the flow analysis and the result analysis according to the fluctuations of the pump's operating conditions and to determine the optimal operation efficiency. In order to evaluate operation efficiency through experimental techniques, considerable time and cost are incurred, such as on-site operating conditions and manufacturing of experimental equipment. If the performance of the pump is not suitable for the site, and the performance of the pump needs to be reduced, a method of changing the rotation speed or using a special liquid containing high viscosity or solids is used. Especially, in order to prevent disruptions in the operation of LNG production bases, a technology is required to satisfy the required performance conditions by processing the existing impeller of the pump within a short time. Therefore, in this study, the rotation difference of the pump was applied to the ANSYS CFX program by applying the modified 3D modeling shape. In addition, the results obtained from the flow analysis and the curve fitting toolbox of the MATLAB program were analyzed numerically to verify the outer diameter correction theory.

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.406-411
• /
• 2011

This study was conducted to find out the effect of cut-off period (0 hour, 3 hours, 6 hours, 12 hours, and 24 hours) to supply nutrient solution for chicon forcing at that was predrying treatment on the storability of chicon. The cut-off treatment increased dry matter rate, respiration rate, and ethylene production rate. The dry matter rate of chicon increased, as the cut-off period increased, but the respiration rate and ethylene production rate of chicon was highest in 12 hours and 6 hours cut-off treatment, respectively, and then their rates decreased, as the cut-off period prolonged. The weight loss at cut-off 6 hours treatment was lower than other treatments during $10^{\circ}C$ storage temperature. The cut-off 6 hours treatment showed higher carbon dioxide and oxygen concentration in 10,000 cc/$m^2$/day/atm oxygen permeability film package during storage period than control and showed a little predrying effect but was not statistically significant. At $4^{th}$ day, the ethylene concentration reached higher than other storage day and after that decreased but was not statistically significant. The quality of chicon for 3 hours, 6 hours, 24 hours cut-off treatments on storability showed higher than other treatments, accordingly. The 6 hours cut-off treatment showed the inhibited effect of the degree of browning of chicon cutting plane. The effect of 6 hours cut-off treatment on storability of chicon showed proper predrying effect, reduced moisture loss and browning inhibition apparently during $10^{\circ}C$ storage.