• Korean Institute of Interior Design Journal
• /
• v.13 no.2
• /
• pp.120-132
• /
• 2004

고령사회 2001의 발표에 의하면, 노년인구의 증가는 전 세계적으로 21세기까지 지속될 전망이며, 우리나라도 예외가 아니어서 이에 대한 심각한 사회문제가 예상되고, 이들을 위한 특수주거시설에 대한 환경개선이 요망된다. 본 연구는 노인주거복지시설에서 색채와 조명에 대한 개선방향을 제시하기 위한 것으로, 색채와 조명환경을 정량적, 정성적으로 비교 분석하는데 연구의 목적이 있다. 이를 위해 2003년 2월부터 8월까지 우리나라와 미국의 양로시설 20사례에 대한 현장방문조사가 수행되었고, 모든 시설이 공통적으로 가지고 있는 로비, 복도, 식당, 침실 등 4개 영역이 집중적으로 조사되었다. 1) 색상분포도 조사 결과, 한국시설은 미국 시설과 달리 주조색으로 한색을 많이 사용하고 있으며, 보조색, 강조색의 활용도가 낮은 것으로 나타났다. 2) 색상$\cdot$명도의 간격별 조화 정도에 대한 정량적 평가를 통해 한국시설은 명도대비보다는 색상대비가, 유사조화보다는 대비조화가 두드러졌는데 기능적 측면에서는 이상적이나 친근한 분위기를 만들기에는 한계가 있다. 3) 미도(Aesthetic Measure) 측정 결과, 한국과 미국 시설 모두 평균 이상을 보였는데, 특히 한국시설은 색상 대비 이외에 유사색 조화와 같은 질서요소를 강화시킬 필요가 있다. 4) 한국시설은 미국에 비해 조명 환경이 매우 열악하였는데, 자연채광의 유입은 어느정도 만족스러우나 이를 양질의 조명으로 만들기 방안이 요구된다. 5) 조명방식, 광원유형 등 인공조명에 대한 분석 결과, 한국시설은 매우 단순하며 경제적인 방법에 의존하고 있는데 광원의 선택, 배치, 설치 등 기술적인 보완이 요구된다. 6) 한국시설들의 시설별, 영역별 평균조도는 매우 낮은데, 활동시간대의 권장조도 유지는 물론, 영역 간의 조도 차이를 줄이는 방안이 요구된다.신만의 고유한 해결책으로 발전시키는지를 고찰하고자 한다. 본 논문의 목적은 서울을 사례분석 중 하나로 사용하여 인테리어 디자인 분야의 경계를 대도시로 확장하는 동시에 새로운 적용영역의 가능성을 탐구하는데 있다 하겠다.[C/N]의 값을 나타내었다.다.다.화 기술, 구동방법등에 대한 기술개요와 국내외 기술동향에 대하여 소개하고자 한다.었다.다._{2}$가 0.25[wt%] 첨가된 시편의 20[.deg.C]에서의 유전상수는 16,700으로 최대값을 유전손실을 1.28[%]로 최소값을 나타내었다. 또한 모든 시편은 온도 및 주파수에 따라 유전상수가 완만하게 변화하는 유전이완 특성을 나타내었다.다.수적인 물의 양에 따른 DIAION WA30의 라세미화 효율에 관하여 실험한 결과, 물의 양이 증가할수록 그 효율은 감소하였다. DIAION WA30을 라세미화 촉매로 사용하여 아이소옥탄 내에서 라세믹 나프록센 2,2,2-트리플로로에틸 씨오에스터의 효소적 DKR 반응을 수행해 보았다. 그 결과 DIAION WA30을 사용하지 않은 경우에 비해 반응 전환율과 생성물의 광학 순도는 급격히 향상되었다. 전통적 광학분할 반응의 최대 50%라는 전환율의 제한이 본 연구에서 찾은 DIAION WA30을 첨가함으로써 성공적으로 극복되었다. 또한 고체 염기촉매인 DIAION WA30의 사용은 라세미화 촉매의 회수 및 재사용이 가능하게 해준다.해준다.다. TN5 세포주를 0.2 L 규모 (1 L spinner flask)oJl에서 세포간의 응집현상 없이 부유배양에 적응,배양시킨 후 세포성장 시기에 따른 발현을 조사한 결과 1 MOI의 감염조건 하에서는 $0.6\times10^6$cell/mL의 early exponential시기의 세포밀도에서 72시간 배양하였을 대 최대 발현양을 나타내었다. 나타내었다.

• Journal of KIISE:Databases
• /
• v.35 no.3
• /
• pp.231-242
• /
• 2008

W3C has selected OWL as a standard for Web ontology description and a necessity of research on storage models that can store OWL ontologies effectively has been issued. Until now, relational model-based storage systems such as Jena, Sesame, and DLDB, have been developed, but there still remain several issues. Especially, they lead inefficient query processing performance. The structural problems of their low query processing performance are as follow: Jena has a simple structure which is not normalized and also stores most information in a single table. It exponentially decreases the performance because of comparison with unnecessary information for processing queries requiring join operations as well as simple search. The structures of storages(e.g., Sesame) have been completely normalized. Therefore it executes many join operations for query processing. The storages require many join operations to find simply a specific class. This paper proposes a storage model to resolve the problems that the query processing performance is decreased because of non-normalization or complete normalization of the existing storages. To achieve this goal, we analyze the problems of existing storage models as well as relations of OWL elements and query patterns. The proposed model, defined with the analysis results, provides an optimal normalized structure to minimize join operations or unnecessary information comparison. For the experiment of query processing performance, a LUBM data sets are used and query patterns are defined considering search targets and their hierarchical relations. In addition, this paper conducts experiments on correctness and completeness of query results to verify data loss of the proposed model, and the results are described. With the comparative evaluation results, our proposal showed a better performance than the existing storage models.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.14 no.2
• /
• pp.2603-2609
• /
• 1972

A study on how the condition of farmland influences operating efficiency of a tractor came up with the following results in the primary experiment. (1) $10m{\times}30m$ plot of which length is shortest in this experiment, took a maximum of required time per onea plow, whereas $20m{\times}120m$ plot, whose length is longest in the same experiment, took a minimum of required time per one a to plow. It reveals, accordingly, that the proportion between width and length should be 1:6; the most desirable proportion that proves to most profitable in terms of time. (2) All the available efforts were made to diminish some unplowed parts of plot to a minimum. It was revealed, however, in the experiment that the ratio of unplowed plot leads to 7.52% in the plot 6; the highest ratio, and 3.44% in the plot 1; the lowe ratio. That shows us that the ratio of availability of land be higher in a more rectangular plot. (3) But even a rectangular plot allows lower ratio of availability in case that the width is narrow. It is showed that a higher ratio of availability can be obtained in when the width of plot is more than 20 meters at minimum. (4) In the operation of plowing by using a tracter, It was also revealed that we could not but have a quite a considerable loss in terms of both the ratio of availability and the required tine for plowing unless we maks a plan to with the unplowed part of plot.

• Journal of KIISE:Information Networking
• /
• v.34 no.3
• /
• pp.226-238
• /
• 2007

In this paper, we present a novel fully distributed topology control protocol that can construct the multiple-ring topology of Minimal Connected Dominating Set (MCDS) as the transport backbone for mobile ad hoc networks. It makes a topology from the minimal nodes that are chosen from all the nodes, and the constructed topology is comprised of the minimal physical links while preserving connectivity. This topology reduces the interference. The all nodes work as the nodes of the distributed parallel Boltzmann machine, of which the objective function is consisted of two Boltzmann factors: the link degree and the connection domination degree. To define these Boltzmann factors, we extend the Connected Dominating Set into a fuzzy set, and also define the fuzzy set of nodes by which the multiple-ring topology can be constructed. To construct the transport backbone of the mobile ad hoc network, the proposed protocol chooses the nodes that are the strong members of these two fuzzy sets as the clusterheads. We also ran simulations to provide the quantitative comparison against the related works in terms of the packet loss rate and the energy consumption rate. As a result, we show that the network that is constructed by the proposed protocol has far better than the other ones with respect to the packet loss rate and the energy consumption rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7B
• /
• pp.613-627
• /
• 2004

In this paper, we propose an Aggregate Fairness Maker (ARM) required for an Edge router to improve fairness of throughput among the flows of Assured Service in DiffServ with different round trip time (RTT) and we propose a user flow Three Color Marker (uf-TCM) as a flow marker that marks packets from the flow as green, yellow, or red. A yellow packet is the packet that consumes loss token in uf-TCM as well as that is demoted green packet in AM due to disobey the aggregate traffic profile. The proposed AFH promotes yellow packet to green packet or demotes green packet to yellow packet through the fair method without per-flow management, and it improves the feirness of throughput among the flows as well as link utilization. A yellow packet and a red packet have the same drop precedence at Core Router in our scheme. So we can use the RIO buffer management scheme. We evaluated the performance of our proposed AFM and the REDP Marker that was proposed to improve fairness without per-flow management. Simulation results show that, compared with the REDP marker, proposed AFM can improve performance of throughput fairness among the flows with different RTT and link utilization under the over-provisioning, exact-provisioning, and under-provisioning network environments at Multiple DiffServ domains as well as at Single DiffServ domain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1285-1294
• /
• 1999

In this paper we consider the performance of TCP video traffic over ABR with Long-Range Dependent VBR traffic. As compressed coded video traffics are increasing rapidly over Internet, lots of studies are being done for transmitting those traffics efficiently using limited network resources. We consider here the transmitting video service over ABR service in ATM networks, especially satellite networks. CBR or VBR services are suggested in transmitting the video traffic in ATM Forum TM 4.0. But ABR service connection, which is considered as appropriate service for data traffic, can be established with a small amount of bandwidth, MCR (Minimum cell rate). Furthermore ABR service can control the source's transmitting rate using feedback mechanism. Using this feature ABR service can be used in some applications which can control their quality of services corresponding to network loads. Compressed video sources with MPEG-2 are used for Long-Range Dependent VBR traffic here. We model the compressed video source to resemble the MPEG-2 transport streams. These compressed video traffic streams are consisted of three different frames, I-frame, P-frame, and B-frame. So when a network are overloaded, we can control the quality of service using this traffic features. TCP Traffics over ABR need large buffers in ATM switch to satisfy their QoS with background VBR traffics, which have high deviations in bandwidth. Furthermore satellite ATM networks with large feedback delay need large buffers corresponding RTT delay. The performance comparisons among EFCI and ER switch (ERICA+) switches in the network circumstances described above were shown in this paper. We also considered the case with ON-OFF VBR traffics.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.304-310
• /
• 2015

The moisture content of sawdust must be measured accurately and controlled appropriately during storage and transportation because biological degradation could be caused by improper moisture. In this study, to measure the moisture contents of Larix kaempferi sawdust, the near-infrared reflectance spectra (Wavelength 1000-2400 nm) of sawdust were used as detection parameter. After acquiring the NIR reflection spectrum of specimens which were humidified at each relative humidity condition ($25^{\circ}C$, RH 30~99%), moisture content prediction model was developed using mathematical preprocessings (e.g. smoothing, standard normal variate) and partial least squares (PLS) analysis with the acquired spectrum data. High reliability of the MC regression model with NIR spectroscopy was verified by cross validation test ($R^2$ = 0.94, RMSEP = 1.544). The results of this study show that NIR spectroscopy could be used as a convenient and accurate method for the nondestructive determination of moisture content of sawdust, which could lead to optimize wood utilization.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.80-88
• /
• 2007

High adaptability and scalability are two critical issues in implementing a very complex system in a single chip. To obtain high adaptability and scalability, novel system design methodology known as communication-based system design has gained large attention from SoC designers. NoC (Network-on-Chip) is such an on-chip communication-based design approach for the next generation SoC design. To provide high adaptability and scalability, NoCs employ network interfaces and routers as their main communication structures and transmit and receive packetized data over such structures. However, data packetization, and routing overhead in terms of run time and area may cost too much compared with conventional SoC communication structure. Therefore, in this research, we propose a novel methodology which automatically generates a hybrid communication structure. In this work, we map traditional pin-to-pin wiring structure for frequent and timing critical communication, and map flexible and scalable structure for infrequent, or highly variable communication patterns. Even though, we simplify the communication structure significantly through our algorithm the connectivity or the scalability of the communication modules are almost maintained as the original NoC design. Using this method, we could improve the timing performance by 49.19%, and the area taken by the communication structure has been reduced by 24.03%.

• Progress in Medical Physics
• /
• v.19 no.3
• /
• pp.143-149
• /
• 2008

The aim of this study is to suggest the method for image enhancement of digital chest radiograph and evaluate clinically the quality of the resultant image. A nonlinear iterative filter was developed in order to reduce quantum noise preserving edge. Dynamic range was adjusted and adaptive image enhancement was performed based on the property of anatomic region and the degree of compatibility with neighboring pixels. The lung fields were enhanced appropriately to visualize effectively vascular tissue, bronchus and lung tissue with the desired mediastinum enhancement. Clinic evaluation was performed by three radiologists with at least 8 years experience. The anatomic regions of 11 in PA and 9 in Lateral were observed carefully in each 100 radiographs according to ITU (International Telecommunication Union) recommendation 500 protocol. The result showed the mean 3.4 between good and adequate. This means that the clinical utility of the image quality is enough. In this study, image enhancement was carried out considering image display device and human perceptual system to prevent the loss of useful anatomic information. In order to increase the diagnostic accuracy in digital radiograph, the continuous study on image enhancement is needed.

• Journal of Radiation Protection and Research
• /
• v.11 no.1
• /
• pp.57-64
• /
• 1986

This paper described an improved technical method required for proper evaluation of personnel exposures by means of the photographic dosimeter developed by KAERI in lower gamma or X-ray energy regions, with which response of the dosimeter varies significantly. With calibration of the dosimeter in the energy range from 30 to 300 keV, the beam spectrum was carefully selected and specified it adequately. The absorber combinations and absorber thickness used to obtain the specified X-ray spectra from a constant potential X-ray machine were determined theoretically and also experimentally. A correlation between the density and exposure for the four separate energies, such as $49\;keV_{eff},\;154\;keV_{eff}\;250\;keV_{eff}\;and\;662\;keV$, is experimentally determined. As a result, it can be directly evaluated the exposure from the measured response of dosimeter.