• Journal of Chest Surgery
• /
• v.29 no.2
• /
• pp.177-184
• /
• 1996

Between 1987 and 1994, 21 patients were treated surgically for aortic aneurysm involving the thoracoabdominal aorta. There were 11 males and 10 females, and their age ranged from 20 to 67 years old and mean age was 41.5 years. Many complained of back pain, chest pain or discomfort, and flank pain, but three patients were asymptomatic. 15 patients had chronic dissection (71.4%) and 6 had nondissecting fusiform or saccular aneurysm(28.5%), and of those 15 patients with chronic dissection, 6(28.5%) had atherosclerosis assniated with hypertension, 5 (23.8%) were Martian syndrome, and 2 (9.5%) were associated with pregnancy. The diameter of an aneurysm ranged from 6cm to 12cm, and their extent was classified as type I in 7(33.3%), type II in 8(38.1%), type III in 3(14.3%), and type IV in 3(14.3%) patients based on Crawford classification for TAA . Diseased aorta was replaced with artificial vascular graft in all but one patient. In whom the aortic tear site due to pseudoaneurysm was closed by primary suture. For the spinal cord protection during the operation, we used partial cardiopulmonary bypass (FV-FA or PA-FA bypass) in 12 patients (57.1%), Biopump (LA-FA bypass) in 4(19.0%), total circulartory arrest and CPB in 2 (9.5%), Gott's heparinized shunt in 1(4.7%), and simple aortic cross clamping in 2 (9.5%). The most common complication after the operation was hoarseness due to unilateral vocal cord palsy which onured in 5 patients (23.8%), and the next common complication was wound infection in 4 patients(19.0%), paraplegia in 2 patients (9.5%), chylothorax in 1 patient(4.7%). The hospital mortality rate was 9.5% (2deaths), and there was no late death. Our experience shows that the graft replacement of TAAA had reasonable rate of mortality, low rate of serious complication, and provided good post operative state of the pati nts, and since the thoracoabdominal aortic operation is not a high risky procedure anymore, we recommend a radical operation for the indicated patients.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.2
• /
• pp.237-246
• /
• 2015

Purpose: The present study was conducted to reveal the correlation of structural denaturation and decrease of enzyme activity when the antioxidative enzymes, superoxide dismutase (SOD) and catalase (CAT) were repeatedly exposed to UV-B, and further investigate whether the denaturation and inactivation of those enzymes can be effectively blocked by using UV-inhibitory RGP lens. Methods: Each enzyme solution was prepared from the standardized SOD and CAT, and repeatedly exposed to UV-B of 312 nm for 30 minutes, 1 hour and 2 hours a day over 1, 2, 3, 4 and 5 days. Structural denaturation of SOD and CAT induced by repeat UV-B irradiation was confirmed by the electrophoretic analysis, and their enzyme activity was determined by the colorimetric assay using the proper assay kit. At that time, the change in structure and activity of the antioxidant enzymes directly exposed to UV-B was compared to the case that UV-B was blocked by UV-inhibitory RGP lens. Results: SOD exposed repeatedly to UV-B showed the polymerization pattern in the electrophoretic analysis when it repeatedly exposed for 30 min a day, however, the change of its activity was less than 10%. On the other hand, CAT repeatedly exposed to UV-B reduced size and density of the electrophoretic band which indicated a structure denaturation, and its activity was significantly decreased. In the case that the repeat exposure time was longer, CAT activity was completely lost even though some enzyme band occurred in the electrphoretic analysis. In addition, the degeneration of CAT due to UV-B irradiation was inhibited to some extent by using RGP lens with a UV-B blocking of 63.7%, however, it was not completely inhibited. Conclusions: From these results, it was revealed that the structural denaturation of antioxidative enzymes was not perfectly correlated with the reduction in enzyme activity according to the type of enzyme. It is recommended to minimize the exposure time to UV when wearing contact lens, or wear the contact lenses having UV blocking rate of the FDA Class I blocker or the sunglasses having equivalent UV-blocking rate for reducing the damage of antioxidative enzymes induced by UV.

• Korean Business Review
• /
• v.11
• /
• pp.241-253
• /
• 1998

One form of the anomalies of stock price changes as reaction to earnings information is believed to be caused by the so-called earnings fixation, which is the overreaction of stock prices to earnings. According to the Sloan (1996) study, stock price changes are positively associated with earnings at the time of earnings releases, but the association becomes negative after that, as the early overreaction is corrected. However, the problem in his study is to use cash flows computed by adjusting earnings with appropriate income statement and balance sheet items. As Bahnson et al. (1996) show, these cash flows substantially deviate from SFAS No. 95 cash flows and the sample used in this study is found to be subject to this substantial measurement error. Therefore, the result of Sloan might be driven by this error and the reexamination of earnings fixation is warranted. The results are generally consistent with those in Sloan. First, earnings is positively associated with stock price changes at the time of earnings releases, but the association becomes negative after that. Second, cash flows show a weak association with stock price changes at the time of earnings releases, but the association become stronger thereafter. Third, when seperated from cash flows, accruals have an incremental explanation about stock price changes beyond that of cash flows, accruals have a negative association later on. This finding is consistent with stock price overreaction to accruals, even when more cleaner cash flow data are used.

• Korean Journal of Agricultural Science
• /
• v.22 no.1
• /
• pp.1-10
• /
• 1995

All agricultural crops and products should be cultured, harvested, handled and processed by the proper mechanical methods in the mechanized farming systems. Agricultural crops might be injured or deformed through various working stages due to static or dynamic forces of machines. Mechanical forces had to be applied with proper degrees to the agricultural crops in incoincidence with properties of crops without any damage of crops so as to increase the work efficiency qualitatively. Knowledges of mechanical properties of agricultural materials are essential to prevent of agricultural crops in relation with mechanical farming system. This study was carried out to examine and analyze the creep behavior of the rice stalk on growing and harvesting periods by mechanical model with computer measurement system in radial directional compressive force and bending force. The creep behavior of the rice stalk could be predicted precisely and its results approached closely to the measured values. The creep behaviors were increased greatly with increase of compressive force, namely, the steady state creep behavior occurred at the force less then 25N and the logarithmic creep behavior at the force bigger than 30N. The instantaneous elastic modulus $E_o$ and the retardation time ${\tau}_K$ were increased together with increase of applied forces, meanwhile the retarded elastic modulus $E_r$ and viscosity ${\eta}_v$ were decreased with increase of applied forces in mechanical model being expected the creep behavior in relation with the level of applied forces, which was well explained that the rice stalk might be visvo-elastic material. In the creep test along the stalk portion with compressive force and bending force, the intermediate portion showed greatest values and also the lower portion showed the least values, which implied that the intermediate portions of rice stalk were very weak. The steady state creep behavior occured at the intermediate portion and the upper portion in the rice stalk at the compressive force larger than 25.0N, which showed the possibility of injury due to external forces.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.168-176
• /
• 2011

Purpose: This study aims at investigating the influence of various insertion torques on thermal changes of bone. A proper insertion torque is derived based on the thermal analysis with two different implant designs. Materials and methods: For implant materials, bovine scapula bone of 15 - 20 mm thickness was cut into 35 mm by 40 - 50 mm pieces. Of these, the pieces having 2 - 3 mm thickness cortical bone were used as samples. Then, the half of the sample was immersed in a bath of $36.5^{\circ}C$ and the other half was exposed to ambient temperature of $25^{\circ}C$, so that the inner and surface temperatures reached $36.5^{\circ}C$ and $28^{\circ}C$, respectively. Two types of implants ($4.5{\times}10\;mm$ Br${\aa}$nemark type, $4.8{\times}10\;mm$ Microthread type) were inserted into bovine scapula bone and the temperature was measured by a thermocouple at 0.2 mm from the measuring point. Finite element method (FEM) was used to analyze the thermal changes at contacting surface assuming that the sample is a cube of $4\;cm{\times}4\;cm{\times}2\;cm$ and a layer up to 2 mm from the top is cortical bone and below is a cancellous bone. Boundary conditions were set on the basis of the shape of cavity after implants. SolidWorks was used as a CAD program with the help of Abaqus 6.9-1. Results: In the in-vitro experiment, the Microhead type implant gives a higher maximum temperature than that of the Br${\aa}$nemark type, which is attributed to high frictional heat that is associated with the implant shape. In both types, an Eriksson threshold was observed at torques of 50 Ncm (Br${\aa}$nemark) and 35 Ncm (Microthread type), respectively. Based on these findings, the Microthread type implant is more affected by insertion torques. Conclusion: This study demonstrate that a proper choice of insertion torque is important when using a specific type of implant. In particular, for the Microthread type implant, possible bone damage may be expected as a result of frictional heat, which compensates for initial high success rate of fixation. Therefore, the insertion torque should be adjusted for each implant design. Furthermore, the operation skills should be carefully chosen for each implant type and insertion torque.

• Korea journal of population studies
• /
• v.28 no.2
• /
• pp.1-32
• /
• 2005

The optimum population of a society or country can be defined as 'the population growth path that maximizes the welfare level of the society over the whole generations of both the present and the future, under the paths allowed by its endowments of production factors such as technology, capital and labor'. Thus, the optimum size or growth rate of population depends on: (i) the social welfare function, (ii) the production function, and (iii)demographic economic interrelationship which defines how the national income is disposed into consumption(birth and education of children included) and savings on the one hand and how the demographic and economic change induced thereby, in turn, affect production capacities on the other. The optimum population growth path can, then, be derived in the process of dynamic optimization of (i) under the constraints of (ii) and (iii), which will give us the optimum population growth rate defined as a function of parameters thereof. This paper estimates the optimum population growth rate of Korea by: specifying (i), (ii), and (iii) based on the recent development of economic theories, solving the dynamic optimization problem and inserting empirical estimates in Korea as the parametric values. The result shows that the optimum path of population growth in Korea is around TFR=1.81, which is affected most sensitively, in terms of the size of the partial elasticity around the optimum path, by the cost of children, share of capital income, consumption rate, time preference, population elasticity of utility function, etc. According to a survey implemented as a follow up study, there are quite a significant variations in the perceived cost of children, time preference rate, population elasticity of utility across different socio-economic classes in Korea, which implied that, compared to their counterparts, older generation and more highly educated classes prefer higher growth path for the population of Korea.

• Food Science and Preservation
• /
• v.23 no.7
• /
• pp.1058-1064
• /
• 2016

This study investigated the correlation between physicochemical (color, soluble solids content (SSC), pH, titratable acidity (TA), and firmness) and sensory (appearance, taste, odor, and texture) characteristics of environment-friendly 'Campbell early' grapes to identify quality indices. For analysis, samples of similar-sized grapes were collected from five orchards. The results showed that the physicochemical characteristics of CIE $L^*$, CIE $a^*/b^*$, SSC, pH, TA, and firmness and the sensorial characteristics of color intensity, freshness of stem, odor, sourness, sweetness, and elasticity were different among groups. Correlation analysis results showed that an increase in sweetness and firmness and a decrease in sourness were associated with an increase in overall acceptance. Sourness and sweetness were positively correlated with CIE $L^*$ (r=0.88) and firmness (r=0.95), individually. In the principal component analysis results, component F1 and F2 explained 44.35% and 33.77%, respectively, of the total variance (78.12%). F1 represented firmness, sweetness, elasticity, hardness, grape odor, color intensity, sweet odor, sourness, and damage degree. F2 represented CIE $L^*$, TA, CIE $a^*$, CIE $a^*/b^*$, SSC/TA, SSC, and peel thickness. The results showed that consumer acceptance of 'Campbell early' grapes can be determined by assessing physicochemical attributes of firmness, CIE $L^*$, TA, CIE $a^*$, CIE $a^*/b^*$, SSC/TA, and SSC and various sensorial attributes including sweetness, fruit elasticity, fruit hardness, grape odor, and color intensity.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.1 no.1
• /
• pp.43-48
• /
• 2002

Purpose : We evaluated radiographic changes and clinical manifestations of the elbow joint to identify the effects of the throwing between dominant and non-dominant arms. Materials and Methods : A hundred and five little leaguer’s baseball player in 5 elementary school and 2 middle school were evaluated for clinical symptoms and radiographic changes about elbow joint. Mean age was 12 years old and average periods of exercise were 32 months. Elbow functions were evaluated using ASES standardized assessment form and radiographic changes of medial epicondyle were examinated for enlargement, separation of the apophyses, fragmentation and irregularity. Results : Thirty seven players (35$\%$) were complained pain with throwing and the average score was 4.8 using visual analog scale. There were no significant differences in range of motion except flexion angle, valgus angle, and strength between dominant arm and non-dominant arm. Valgus laxity was more prominent in dominant arm. Ulnohumeral tenderness, radiocapitellar tenderness and medial flexor origin tenderness were in 18, 6, and 17 cases respectively in dominant arm. Medial epicondyle was enlarged in dominant arm with 13.0 by 6.3 mm compared to non-dominant arm with 11.7 by 6.1 mm. Apophyseal separation was 0.8 mm in dominant arm and 0.5 mm in non-dominant arm. Fragmentation and irregularity were 14 (13$\%$) and 25 (24$\%$) cases respectively in dominant arm. Conclusion : In little league baseball player, it needs usage of ball and bat with appropriate weight, and careful conditioning programs through throwing exercise in order to avoid elbow injuries.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.2 s.42
• /
• pp.222-230
• /
• 1993

Industrial glues, known as 'Bonds' in Korea, contain many kinds of organic solvents, and glue sniffing of youths became one of the social problems in Korea. Mixed exposures to solvents by glue sniffing may induce chronic toxicities different from those by exposures to solvents of single component. To test effects of the glue sniffing on weight gain or central nervous system, two groups of 20 male Sprague-Dawley rats were exposed to air(control group) or vapors of the glues to narcotic status(exposed group), and weight check, tail flick test, hot plate test, rotarod treadmill test were done on the 14th,24th, 36th, 45th, 53rd, 86th, 102nd, 117th, 134th and 151st days after the first exposure. On the 188th day, their brains were excised and examined by a pathologist. Weight gain, controlled against time change, showed significant difference between the groups, but response times in tail flick test, hot plate tests, and rotarod treadmill test didn't. In pathological examination with blind method, no macroscopic or microscopic differences were found between the two groups. These results suggests that organic lesion in central nervous system may not ensue glue sniffing, but, before firm conclusion, more studies in various exposure conditions should be followed.

• Korean Journal of Organic Agriculture
• /
• v.7 no.1
• /
• pp.115-127
• /
• 1998

Under the visual judgement of consumers, to reduce nitrate intake through vegetables, this experimentation analyzed the content of nitrate, in heading leaf vegetables such as chinese cabbage(Brassica campestris L. ssp. perkinensis (Lour.) Rupr), cabbage(Brassica oleracea L. var. capitata) and lettuce(Lactuca sativa L.) by the leaf number. And the result is summarized as follows In the nitrate content change by the leaf number, the nitrate content is increased as it goes by from inner leaf to outer leaf and the nitrate content in leaf midrib is higher than that in leaf blade. In case of chinese cabbage, the nitrate content in the leaf midrib from the most inner leaf to the most outer leaf changed 40-3,177ppm and in the leaf blade it changed 40-2,887ppm. But the nitrate content in the leaf blade of cabbage from the most inner leaf to the most outer leaf changed 89~2,297ppm and in the leaf blade it changed 25~765ppm. In case of lettuce, the nitrate content change of the leaf midrib by the leaf position was 419~4,349ppm, and in the leaf blade it changed 260~2894ppm. It was conclude that the outer leaf of chinese cabbage, cabbage and lettuce should be removed to keep the lower nitrate intake by population before it is consumed.