• Journal of the Korean Applied Science and Technology
• /
• v.39 no.3
• /
• pp.471-478
• /
• 2022

This study attempted to find out the improvement effect the improvement effect of Babassu oil on damaged hair by damaged hair by applying a hair-improving formulation with Babassu oil to damaged hair after manufacturing. As the experimental raw material, the contents of babassu oil were changed to 0 g, 3 g 6 g, and 9 g and added to the perm base agent. The prepared formulation was applied to 8 levels of bleached sample hair. Each sample and damaged hair were measured and compared and analyzed. As for the measurement method, tensile strength, absorbance using methylene blue, and gloss were measured to know the effect of improving damage hair Statistical analysis was conducted for the reliability of the research results. As a result of the research, it was found that the tensile strength was higher than that of the damaged hair in all samples applied by adding babassu oil. As a result of absorbance analysis using methylene blue, it was found that absorbance was decreased in all samples compared to damaged hair. As a result of the gloss measurement, it was found that the gloss was increased in all samples compared to the damaged hair. In conclusion, it was found that babassu oil had an improvement effect on damaged hair.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.7
• /
• pp.33-44
• /
• 2004

This paper is focused on the spatial variability of measured strong motion data during earthquake and its relationship with the performance of water distribution pipelines and residential buildings. Analyses of strong motion and the correlations of peak ground velocity (PGV) and pipeline and building damage were conducted with a very large geographical information system (GIS) database including the relationship of time and earthquake intensity and the measured location, and Kriging spatial statistics. Kriging was used to develop regressions of pipeline repair rate (RR) and residential building damage ratio (DR) associated with $90\%$ confidence peak ground velocity (PGV). Such regressions using Kriging provide an explicit means of characterizing the uncertainty embodied in the strong motion data compared with other spacial statistics such as inverse distance method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.1
• /
• pp.18-26
• /
• 2000

Boiler high-temperature pipelines such as main steam pipe, header and steam drum in fossil power plants are degraded by creep damage due to severe operating conditions such as high temperature and high pressure for an extended period time. Conventional measurement techniques(replica method, electric resistance method, and hardness test method) for measuring creep damage have such disadvantages as complex preparation and measurement procedures, too many control parameters. And also these techniques have low practicality and applied only to component surfaces with good accessibility. In this paper, artificial creep degradation test and ultrasonic measurement for their creep degraded specimens(Cr-Mo alloy steels) were carried out for the purpose of evaluation for creep damage. Absolute measuring method of quantitative ultrasonic measurement for material degradation was established, and long term creep degradation tests using life prediction formula were carried out. As a result of ultrasonic tests for crept specimens. we conformed that both the sound velocity decreased and attenuation coefficient linearly increased in proportion to the Increase of creep life fraction($\Phi$c).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.291-296
• /
• 2015

The tire damage classification method is researched on the periodicity detection of ramdomness ultrasonic signals to occur at the driving vehicle tire. Setting method of adaptive threshold is proposed in order to valid pulse detection by tire damage in ultrasonic noise on the road and used low pass filter for decrease signal ramdomness as preprocessing. Time interval of detected pulse is setted the density function depend on the vehicle's speed and the method of tire damage detection is proposed that measuring the first peak's time of time density function.The result of time density function in case of one damage material, the first peak's time is measured within the error limit of tire's rotation period, 169.8ms and 97.9ms and 81.8ms, about the speed of 50km/h and 80km/h and 100km/h. In case of more than one damage material, the sum of each peak's time is measured within the error limit of tire's rotation period about the speed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.42-48
• /
• 2017

When concrete structures expose to fire, the structures were damaged accompanied with degradation of material properties of concrete. In order to determine the reuse of fire-damaged concrete structures, it is needed a careful determination considering conditions of fire damage, such as exposure temperature and exposure time, and also potential to restore fire damage. This study investigates on the evaluation of residual material properties of fire-damaged concrete under different post-fire curing regimes. An experimental study was performed on concrete samples to measure the dynamic elastic modulus by the impact resonance vibration method. Upon the experimental results, the evidence of restoration of material properties was confirmed on specific post-fire curing regimes, higher humidity conditions. Additionally, a correlation analysis was performed on the dynamic elastic modulus with the tensile strength for identifying the effects of post-fire curing regimes on both material properties of fire-damaged concrete.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.33-33
• /
• 2011

반도체 산업기술이 발달함에 따라 고청정 공정 환경이 요구되고 있으며, 반도체 공정용 장비에 이용되는 부품 중 양극산화피막법(Anodizing)으로 피막을 성장시킨 anodic aluminum oxide (AAO)부품은 플라즈마에 의해 화학적, 물리적 침식이 발생하여 코팅막과 모재에 손상을 일으키며 코팅막이 깨지거나 박리되면서 다량의 Particle이 생성됨으로써 공정상의 여러 가지 문제를 야기 시킨다고 알려져 있다. 하지만 코팅막을 평가하는 방법은 거의 전무하며 기본물성 측정방법인 피막두께, 내전압, 임피던스, 내식성 측정방법을 통하여 여러 기본물성측정방법으로 부품의 평가기술을 연구하였다. 본 연구에서는 이러한 진공 부품의 하나인 anodic aluminum oxide (AAO)부품샘플을 누설전류 및 내전압 측정하여 샘플의 전기적 특성을 측정하였고, 표면 미세구조의 변화를 관찰하였다. 부식실험으로는 HCl 가스를 발생시켜 부식정도를 알아봤으며, 부식처리와 플라즈마 처리 모두 코팅 막의 손상과 전기적 특성의 감소를 보였다. 진공장비 전극 부품평가의 유익한 평가 항목으로서 플라즈마 데미지를 주는 도중에 실시간으로 부품평가에 따른 Particle을 측정함으로써 ISPM 장비를 이용하여 진공 장비용 코팅부품이 플라즈마공정에서 발생하는 오염입자를 측정할 수 있는 방법을 연구하였다. 이러한 결과를 이용하여 진공공정에서 사용되는 코팅부품이 플라즈마에 의한 손상정도를 정량화 하고 평가방법을 개발하여 진공장비용 공정 중 실시간으로 부품의 성능평가가 가능하고 코팅부품 신뢰성 향상이 가능할 것으로 본다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.3
• /
• pp.218-224
• /
• 2011

A modal method is presented for the investigation of the effects of measurement errors in damage detection for dynamic structural systems. The structural modifications to the baseline system result in the response changes of the perturbed structure, which are measured to determine a unique system in the inverse problem of damage detection. If the numerical modal data are exact, mathematical programming techniques can be applied to obtain the accurate structural changes. In practice, however, the associated measurement errors are unavoidable, to some extent, and cause significant deviations from the correct perturbed system because of the intrinsic instability of eigenvalue problem. Hence, a self-equilibrating inverse system is allowed to drift in the close neighborhood of the measured data. A numerical example shows that iterative procedures can be used to search for the damaged structural elements. A small set of selected degrees of freedom is employed for practical applicability and computational efficiency.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.377-380
• /
• 2003

XLPE(Crosslinkable Polyethylene) 케이블은 절연성이 우수하여 전력용으로 많이 사용되고 있다. 그러나, 시설된지 오래된 케이블의 노후화와 지중 매설 케이블의 시공시 및 포설이후 외부손상 등으로 인해 정전사고가 많이 발생하고 있는 추세이다. 본 논문은 케이블의 외부 손상에 의해 발생하는 부분방전에 의해 공간으로 전파되는 전자파를 측정하는 UHF법을 통해 주파수 스펙트럼을 측정하고 측정된 데이터 처리를 통해 방전진전에 따른 스펙트럼의 특성을 분석하였다. $^{[1]}$[3][6]//

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.8
• /
• pp.726-734
• /
• 2007

구조물에 손상이 발생하면 구조물의 강성변화로 구조물의 고유진동수에 변화가 발생하게 된다. 실험을 통해 얻을 수 있는 손상 전 구조물의 고유진동수와 해석적 방법을 사용하여 구하는 고유진동수가 같다고 가정하고 해석적인 방법으로 손상전후 고유진동수비를 구하여 3차원 그래프로 표시하였다. 손상이 한 부위에 존재할 경우 진동실험으로 구한 고유진동수비를 고유진동수비 그래프와 비교하여 손상의 위치, 크기 및 방향을 알 수 있었으나 여러 지점에 손상이 발생할 경우에는 손상을 파악하기 위해 고유진동수비 그래프 외에 주파수 응답함수를 병행하여 사용하였다.

• Korean Journal of Materials Research
• /
• v.8 no.9
• /
• pp.825-830
• /
• 1998

자화된 유도결합형 C4F8 플라즈마로 SiO2를 건식식각시 실리콘 표면에 발생하는 손상과 오염에 대하여 연구하였다. 오염의 분석을 위해서 XPS, SIMS, TEM을 사용하였으며, 손상정도를 측정하기 위해서 HRTEM과 Schottky-diode 구성을 통한 I-V특성 측정을 사용하였다. 유도 결합형 C4F8 플라스마에 0에서 18Gauss까지의 자장이 가해짐에 따라서 실리콘 표면에 생기는 잔류막의 두께가 SiO2식각속도와 선택비의 증가와 함께 증가하였으며, XPS를 통하여 그 조성이 fluorine-rich에서 carbon-rich 한 상태로 변화함을 알 수 있었다. 자장을 가하지 않는 상태에서는 표면에서 $40\AA$부근까지 고밀도의 손상층이 관찰되었으나, 자장을 가함에 따라서 노출된 손상층의 깊이는 깊어지나 그 밀도는 줄어들음을 HRTEM을 통하여 관찰 할 수 있었다. Schottky-diode를 통한 I-V특성곡선의 분석으로 자장이 증가함에 따라서 전기적인 손상이 감소함을 알 수 있었다.